A&D UA-651SL Plus Bedienungsanleitung

Lies die bedienungsanleitung für A&D UA-651SL Plus (1 Seiten) kostenlos online; sie gehört zur Kategorie Blutdruckmessgerät. Dieses Handbuch wurde von 43 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 22 Bewertungen. Hast du eine Frage zu A&D UA-651SL Plus oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Unstable blood pressure due to

movement during measurement.

Take another measurement.

Remain still during

measurement.

T hesystolic and diastolic values

are within 10 mmHg of each other.

Apply the cuff correctly, and

take another measurement.

The pressure value did not

increase during the inflation.

The cuff is not applied correctly.

PUL DISPLAY ERROR

The pulse is not detected correctly.

Symbols printed on the device case.

Symbols

Function / Meaning

Standby and Turn the device on.

SYS

Systolic blood pressure in mmHg

DIA

Diastolic blood pressure in mmHg

P UL/min

Pulse per minute

Battery installation guide

Direct current

Type BF:Device, cuff and tubing are designed to provide

special protection against electrical shocks.

EC directive medical device label

EU- representative

Manufacturer

Date of manufacture

WEEE label

SN

Serial number

Refer to instruction manual/booklet

Polarity of DC jack

IP

International protection symbol

Keep dry

6.

6.

6.

6.6.

Using the Monitor

Using the Monitor

Using the Monitor

Using the MonitorUsing the Monitor

6.1.

6.1.

6.1.

6.1.6.1.

Installin

Installin

Installin

InstallinInstalling / Chang

g / Chang

g / Chang

g / Changg / Changing The Bat

ing The Bat

ing The Bat

ing The Bating The Batteries

teries

teries

teriesteries

1. Remove the battery cover.

2. Remove the used batteries from

the battery compartment in case

of changing them.

3. Insert new batteries into the

battery compartment as shown,

taking care that the polarities (+)

and (-) are correct.

4.Replace the battery cover. Use

only R6P, LR6 or AA batteries.

CAUTION

Insert the batteries as shown in the battery compartment. If installed

incorrectly, the device will not work.

Whenblinks on the display and the device announces that the

battery needs to be replaced, replace all batteries with new ones. Do

not mix old and new batteries.It may shorten the battery life, or cause

the device to malfunction.Replace the batteries two seconds or more

after the device turns off.

does not appear when the batteries are drained.

The battery life varies with the ambient temperature and may be shorter

at low temperatures.

Generally, four new R6batteries will last approximately for P three

months when used twice for measurement each day.

Use the specified batteries only. The batteries provided with the device

are for testing the device performance and may have a limited life.

Remove the batteries if the device is not to be used for a long time. The

batteries may leak and cause a malfunction.

6.2.

6.2.

6.2.

6.2.6.2.

Connectin

Connectin

Connectin

ConnectinConnecting The

g The

g The

g Theg The

Air Hose

Air Hose

Air Hose

Air HoseAir Hose

Insert the air connector plug

into the air socket firmly.

6.3.

6.3.

6.3.

6.3.6.3.

Connectin

Connectin

Connectin

ConnectinConnecting The AC Adapter

g The AC Adapter

g The AC Adapter

g The AC Adapterg The AC Adapter

Insert the AC adapter plug into the DC

jack. Then, insert the AC adapter into

an electrical outlet. The AC adapter,

the model TB-233C is sold separately.

When disconnecting the AC

adapter from the electrical outlet,

grasp and pull the AC adapter

body out of the outlet.

When disconnecting the AC adapter plug from the blood pressure

monitor, grasp and pull the AC adapter plug out of the monitor.

6.4.

6.4.

6.4.

6.4.6.4.

Selectin

Selectin

Selectin

SelectinSelecting The

g The

g The

g Theg TheCorrect Cu

Correct Cu

Correct Cu

Correct CuCorrect Cuff

ff

ff

ffff

Using the correct cuff size is important for an accurate reading. If the

cuff is not the proper size, the reading may yield an incorrect blood

pressure value.

The arm size is printed on each cuff.

The index

and proper fit range, on the cuff, tell you if you are

applying the correct cuff. Refer to "

6.5

6.5

6.5

6.5 6.5 Ap

Ap

Ap

ApApplying T

plying T

plying T

plying Tplying The A

he A

he A

he Ahe Arm Cu

rm Cu

rm Cu

rm Curm Cuff

ff

ff

ffff

".

If the index

points outside of the range, contact your local dealer to

purchase a replacement cuff.

The arm cuff is a consumable. If it becomes worn, purchase a new one.

Arm Size

Recommended Cuff Size

Catalog Number

31 cm to 45 cm

Large adult cuff

CUF-D-- LAISO

22 cm to 42 cm

Wide range cuff

CUF-I- ISO

23 cm to 37 cm

Semi large cuff

CUF-D-- MAISO

22 cm to 32 cm

Adult cuff

CUF-D-A- ISO

16 cm to 24 cm

Small adult cuff

CUF-D-- SAISO

Arm size: The circumference at the biceps.

Symbols printed on the cuff.

Symbols

Function / Meaning

Recommended Action

Artery Position Mark

Set the

mark on the

artery of the upper arm or in

line with the ring finger on

the inside of the arm.

Index

REF

Catalog number

Proper fit range for the large adult

cuff. It's printed on the arge adult l

cuff.

W

Proper fit range for the wide range

cuff. It's printed on the wide range

cuff.

M

Proper fit range for the semi large

cuff. It's printed on the semi large

cuff.

Proper fit range for the adult cuff.

It's printed on the adult cuff.

Proper fit range for the small cuff.

It's printed on the small cuff.

Over range printed on the adult

cuff/semi large cuff/wide range

cuff.

Use the large adult cuff

instead of the adult cuff /semi

large cuff /wide range cuff.

Under range printed on the adult

cuff/semi large cuff/wide range

cuff.

Use the small cuff instead of

the adult cuff / semi large

cuff / wide range cuff.

M

/

A

Over rangeprinted on the small

cuff.

Use the adult cuff/ semi

large cuffinstead of the

small cuff.

M

Under range printed on the large

adult . cuff

Use the semi large cuff

instead of the large adult

cuff.

Lot number

Large adult cuff

Wide range cuff

Semi large cuff

Adult cuff

Small adult cuff

6.5.

6.5.

6.5.

6.5.6.5.

Applying

Applying

Applying

ApplyingApplying The Arm Cuff

The Arm Cuff

The Arm Cuff

The Arm Cuff The Arm Cuff

1. Wrap the cuff around theupper arm, about 1 to 2 cm above the inside

of the elbow, as shown.

Place the cuffdirectly against the skin, as clothing may cause a faint

pulse and result in a measurement error.

2. Constriction of the upper arm, caused by rolling up a shirtsleeve, may

prevent accurate readings.

3. Confirm that the index

points within the proper fit range.

Note: During measurement, it is normal for the cuff to feel very tight. (Do

not be alarmed).

7.

7.

7.

7.7.

Measurements

Measurements

Measurements

MeasurementsMeasurements

7.1.

7.1.

7.1.

7.1.7.1.

Norma

Norma

Norma

NormaNormal M

l M

l M

l Ml Measurement

easurement

easurement

easurementeasurement

1. Place the cuff on the armat heart

level (preferably the left arm). Sit

quietly during measurement.

2.button. Press the _START_

All of the display segments are

displayed. Zero is displayed

blinking briefly.Then the display

changes, as indicated in the

figure at the right, as the

measurement begins. The cuff

starts to inflate. It is normal for the

cuff to feel very tight. A pressure

bar indicator is displayed, as in

the figure at the right, during

inflation.

Note: If you wish to stop inflation at any time,

press the_START_ button again.

3. When inflation is complete,

deflation starts automatically and

the (heart mark) blinks,

indicating that the measurement

is in progress. Once the pulse is

detected, the mark blinks with

each pulse beat.

N ote:If an appropriate pressure is

not obtained, the device starts

to inflate again automatically.

4. When the measurement is

complete, the systolic and

diastolic pressure readings and

pulse rate are displayed. The cuff

exhausts the remaining air and

deflates completely.

5. Press the _START_button again to turn off the power.

Note: The dprovided with an automatic power shutoff function. evice is -

Allow at least 3 minutes between measurements on the same

person.

7.2.

7.2.

7.2.

7.2.7.2.

Measurem

Measurem

Measurem

MeasuremMeasurement with the D

ent with the D

ent with the D

ent with the Dent with the Desired Systoli

esired Systoli

esired Systoli

esired Systoliesired Systolic Pressur

c Pressur

c Pressur

c Pressurc Pressure

e

e

e e

-If reinflation occurs repeatedly,

use the following methods. If your

systolic pressure is expected to

exceed 230 mmHg, use this

procedure.

1. Place the cuff on the armat heart

level (preferably the left arm).

2.button. Press the _START_

3. During thezero blinks, press and

hold the_START_ button until a

number about 30 to 40 mmHg higher

than your expected systolic pressure

appears.

4. When the desired number is

reached, release the

_START_ button

to start measurement. Then continue

to measure your blood pressure as

described on the section "

7

7

7

77.1

.1

.1

.1 .1

Norma

Norma

Norma

NormaNormal Mea

l Mea

l Mea

l Meal Measure

sure

sure

suresurement

ment

ment

mentment

".

7.3.

7.3.

7.3.

7.3.7.3.

Notes f

Notes f

Notes f

Notes fNotes for Accurate M

or Accurate M

or Accurate M

or Accurate Mor Accurate Measurement

easurement

easurement

easurement easurement

Sit comfortably on a chair. Rest your arm on the table. Do not cross

your legs. Keep your feet on the floor and straighten your back.

Sit down in a comfortable position. Place a table with your your arm on

palm facing upward and the cuff at the same level as your heart.

Place the center of the cuff at the same level as your heart.

Relax for about five to ten minutes before measurement. If you are

excited or depressed by emotional stress, the measurement will reflect

this stress as a higher (or lower) than normal blood pressure reading

and the pulse reading will usually be faster than normal.

Remain still and keep quiet during measurement.

Do not measure immediately after physical exercise or a bath. Rest for

twenty or thirty minutes before taking the measurement.

An individual's blood pressure varies constantly, depending on what

you are doing and what you have eaten. What you drink can have a

very strong and rapid effect on your blood pressure.

This device bases its measurements on the heartbeat. If you have a

very weak or irregular heartbeat, the device may have difficulty

determining your blood pressure.

Should the device detect a condition that is abnormal, it will stop the

measurement and display an error symbol. Refer tothe section "

5

5

5

5 5

Symbols

Symbols

Symbols

SymbolsSymbols

" for the description of the symbols.

This device is intended for use by adults. Consult with your physician

before using this device on a child. A child should not use this device

unattended.

Try to measure your blood pressure at the same time every day.

The automatic blood pressure monitor's performance may be affected by

excessive temperature or humidity, or altitude.

8.

8.

8.

8.8.

Recalling t

Recalling t

Recalling t

Recalling tRecalling the Memory

he Memory

he Memory

he Memoryhe Memory Data

Data

Data

Data Data

The device automatically stores up to ty blood pressure and pulse six

measurements in memory. Data stored in memory are assigned a data

number in the order of the newest to the oldest. The oldest data displays as

" ". The symbol in the upper left corner of the display indicates that

you are viewing previous data stored in memory.

8.1.

8.1.

8.1.

8.1.8.1.

Recal

Recal

Recal

RecalRecallin

lin

lin

linling Data

g Data

g Data

g Datag Data

1. When nothing is displayed, press

and hold thebutton to _START_

recall the stored data.

2. Release the button when

displaying the average data.

3. The data number and stored

data are automatically displayed

in order from the last

measurement.

4. The display will turn off

automatically after all data is

displayed.

Note: If you press the _START_ button

while recalling data, the device

turns off.

8.2.

8.2.

8.2.

8.2.8.2.

Clearing

Clearing

Clearing

ClearingClearing Data

Data

Data

Data Data

1. When turning off the device,

press and hold the

_START_

button until the "" is

displayed.

2. Select "" to clear

data.

3. Data is cleared when the

mark blinks.

4. The device turns off

automatically.

9.

9.

9.

9.9.W

W

W

WWhat i

hat i

hat i

hat ihat is

s

s

s s the

the

the

thethe I.H

I.H

I.H

I.H I.H

.B./AFib

.B./AFib

.B./AFib

.B./AFib.B./AFib

When the monitor detects an irregular rhythm during the

measurements, the I.H.B./AFib indicator will appear on the

display with the measurement values.

Note: We recommend contacting your physician if you see this

I.H.B./AFib symbol frequently.

10.

10.

10.

10.10.

What i

What i

What i

What iWhat is

s

s

s s AFib

AFib

AFib

AFibAFib

The heart contracts due to electrical signals occurring in heart and

sends blood through the body. Atrial fibrillation (AFib) occurs when

the electrical signal in the atrium becomes confused and leads to

disturbances in the pulse interval. AFib can cause blood to

stagnate in the heart, which can easily create clots of blood, a

cause of stroke and heart attack.

11.

11.

11.

11.11.

Pressure B

Pressure B

Pressure B

Pressure BPressure Bar Indica

ar Indica

ar Indica

ar Indicaar Indicator

tor

tor

tortor

The indicator monitors the progress of pressure during

measurement.

12.

12.

12.

12.12.

About Bl

About Bl

About Bl

About BlAbout Blood Pressur

ood Pressur

ood Pressur

ood Pressurood Pressure

e

e

ee

What is Blood Pressure?

Blood pressure is the force exerted by blood against the walls of

the arteries. Systolic pressure occurs when the heart contracts.

Diastolic pressure occurs when the heart expands. Blood

pressure is measured in millimeters of mercury (mmHg). One's

natural blood pressure is represented by the fundamental

pressure, which is measured first thing in the morning while one

is still at rest and before eating.

13.

13.

13.

13.13.

WHO Class

WHO Class

WHO Class

WHO ClassWHO Classificatio

ificatio

ificatio

ificatioification Indicato

n Indicato

n Indicato

n Indicaton Indicator

r

r

rr

Each segment of the bar indicator corresponds to the WHO blood

pressure classification.

: The indicator displays

a segment, based on

the current data,

corresponding to the

WHO classification.

14.

14.

14.

14.14.

Troubleshootin

Troubleshootin

Troubleshootin

TroubleshootinTroubleshooting

g

g

gg

Problem

Possible Reason

Recommended Action

Nothing

appears on

the display,

even when

the power is

turned on.

Batteries are

drained.

Replace all batteries with new

ones.

Battery terminals

are not in the

correct position.

Reinstall the batteries with

negative and positive terminals

matching those indicated on the

battery compartment.

The cuff

does not

inflate.

Battery voltage is

too low.

blinks. If the

batteries are

drained completely,

the mark does not

appear.

Replace allbatteries with new

ones.

The device

does not

measure.

Readings

are too high

or too low.

The cuff is not

applied properly.

Apply the cuff correctly.

You moved your

arm o

r body during

measurement.

Make sure you remain still and

quiet during measurement.

The cuff position is

not correct.

Sit comfortably and still. Place

youron arm a table with your

palm facing upward and the cuff

at the same level as your heart.

If you have a very weak or

irregular heartbeat, the device

may have difficulty in determining

your blood pressure.

Other

The value is

different from that

measured at a

clinic or doctor’s

office.

At a clinic or doctor's office, an

apprehension may cause an

elevated reading. Home

measurement reduces the effects

of outside influences on blood

pressure readings, supplements

the doctor's readings.

Remove the batteries. Place them

back properly and take another

measurement.

Note: If the actions described above do not solve the problem, contact

the dealer. Do not attempt to open or repair this product, as any

attempt to do so will make your warranty invalid.

15.

15.

15.

15.15.

Maintena

Maintena

Maintena

MaintenaMaintenance

nce

nce

ncence

Do not open the device. It uses delicate electrical components and

an intricate air unit thatcould be damaged. If you cannot fix the

problem using the troubleshooting instructi

ons, contact the

authorized dealer in your area or our customer service department.

The A&D customer service will provide technical information, spare

parts and units to authorized dealers.

The device was designed and manufactured for a long service life.

However it is generally recommended to have the device inspected

every 2 years, to ensure proper functioning and accuracy. Please

contact the authorized dealer in your area or A&D for maintenance.

16.

16.

16.

16.16.

Tech

Tech

Tech

TechTechnic

nic

nic

nicnical Data

al Data

al Data

al Dataal Data

Type - UA651SLPlus

Measurement method Oscillometric measurement

Measurement range - Pressure: 0 299 mmHg

- Systolic pressure:60 279 mmHg

Diastolic pressure:200 mmHg 40 -

- Pulse: 40 180 beats / minute

Measurement accuracy Pressure: ±3 mmHg

Pulse: ±5 %

Power supply 4 x 1.5V batteries (R6P, LR6 or AA)

- Optional AC adapter (TB233C) (Not included)

Number of measurements

7 Approx. 00 timesLR6 (

alkaline batteries

)

Approx. 200 times R6P (

manganese batteries

)

With pressure value 180 mmHg, room

temperature 23 °C.

Classification Internally powered ME equipment(Supplied

by batteries) / Class II (Supplied by adapter)

Continuous operation mode

Clinical test According to ISO810602013-2：

In the clinical validation study, K5 was used

on 85 subjects for determination of diastolic

blood pressure.

EMD -1-IEC 606012: 2014

Memory 6Last 0 measurements

Operating conditions +10 to +40 °C / 15 to 85 %RH / 800 to 1060 hPa

Transport / Storage conditions

-20 to 60 °C / 10 to 95 %RH700 to 1060+ / hPa

Dimensions HApprox.96 [W] x 68 [] x 130 [D ] mm

WeightApprox. 240 g, excluding the batteries

Ingress protection Device:IP20

Applied part CuffType BF

Useful life Device: 5 years (

when used six times a day

)

Cuff: 2 years (

when used six times a day

)

AC adapter:5 years (

when used six times a day

)

Accessory AC adapter/TB233C

The adapter is to connect the device to a

power source at home. Please contact your

local A&D dealer for purchasing. The AC

adapter is required to be inspected or

replaced periodically.

Symbols that are printed on the AC adapter.

Symbols

Function / Meaning

For indoor use only

Class II device

Thermal fuse

Fuse

EC directive device label

EAC certification device label

Polarity of AC adapter plug

Accessories sold separately

Cuff

Catalog Number

Cuff Size

Arm Size

CUF-D-- LAISO

Large adult cuff

31 cm to 45 cm

CUF-I- ISO

Wide range cuff

22 cm to 42 cm

CUF-D-- MAISO

Semi large cuff

23 cm to 37 cm

CUF-D-A- ISO

Adult cuff

22 cm to 32 cm

CUF-D-- SAISO

Small adult cuff

16 cm to 24 cm

Arm size:The circumference at the biceps.

AC Adapter

Catalog Number

Plug (Outlet type)

TB- 233C

Type C

Note: Specifications are subject to change without prior notice.

IP classification is the degrees of protection provided by

enclosures in accordance with IEC 60529. This device is protected

against solid foreign objects of 12 mm diameter and greater such

as a finger. This device is not protected against water.

Digital Blood Pressure Monitor

Model UA-651SLPlus

Instruction Manual Original

1WMPD4003711C

1.

1.

1.

1.1.

Dear Custome

Dear Custome

Dear Custome

Dear CustomeDear Customers

rs

rs

rsrs

TheA&D blood pressure monitor isone of the most advanced

monitors available ed for ease of use and accuracyandesign is d.

This device will facilitate your daily blood pressure regimen.

We recommend that you read through this manual carefully before

using the device for the first time.

2.

2.

2.

2.2.

Preliminary

Preliminary

Preliminary

PreliminaryPreliminary Remarks

Remarks

Remarks

Remarks Remarks

This device conforms to the European Directive 93/42 EEC for

Medical Products. This is made evident by the mark of

conformity.123 (0: The reference number to the involved notified

body)

The device is designed for use on adults, not newborns or infants.

Environment for use. The deviceis for use to operate by yourself in

the home healthcare environment.

This device is designed to measure blood pressure and pulse rate

of people for diagnosis.

3.

3.

3.

3.3.

Pre

Pre

Pre

PrePrecauti

cauti

cauti

cauticautions

ons

ons

onsons

Precision components are used in the construction of this

device. Extremes in temperature, humidity, direct sunlight, shock

or dust should be avoided.

Clean the device and cuff with a dry, soft cloth or a cloth dampened with

water and a neutral detergent. Never use alcohol, benzene, thinner or

other harsh chemicals to clean the device or cuff.

Avoid tightly folding the cuff or storing the hose tightly twisted for

long periods, as such treatment may shorten the life of the

components.

Take care to avoid accidental strangulation of babies or infants

with the hoseand cable .

Do not twist the air hose during measurement. This may cause

injury due to continuous cuff pressure.

The device and cuff are not water resistant. Prevent rain, sweat

and water from soiling the device and cuff.

Measurements may be distorted if the device is used close to

televisions, microwave ovens, cellular telephones, X-ray or other

devices with strong electrical fields.

Wireless communication devices, such as home networking

devices, mobile phones, cordless phones and their base stations,

walkie-talkies can affect this blood pressure monitor.

Therefore, a minimum distance of 30 cmshould be kept from

such devices.

When reusing the device, confirm that the device is clean.

Used equipment, parts and batteries are not treated as ordinary

household waste, and must be disposed of according to the

applicable local regulations.

Do not modify the device. It may cause accidents or damage to

the device.

To measure blood pressure, the arm must be squeezed by the

cuff hard enough to temporarily stop blood flow through the

artery. This may cause pain, numbness or a temporary red mark

to the arm. This condition will appear especially when

measurement is repeated successively. Any pain, numbness, or

red marks will disappear with time.

Measuring blood pressure too frequently may cause harm due to

blood flow interference. Check that the operation of the device

does not result in prolonged impairment of blood circulation,

when using the device repeatedly.

Clinical testing has not been conducted on newborn infants and

pregnant woman. Do not use on newborn infants or pregnant woman.

If you have had a mastectomy, please consult a doctor before

using the device.

Do not let children use the device by themselves and do not use

the device in a place within the reach of infants. It may cause

accidents or damage.

There are small parts that may cause a choking hazard if

swallowed by mistake by infants.

Do not touch the batteries, the DC jack, and the patient at the

same time. That may result in electrical shock.

Unplug the AC adapter when not in use during the measurement.

Use of accessories not detailed in this manual may compromise safety.

Should the battery shortcircuit, it may beco-me hot and

potentially cause burns.

Allow the device to adapt to the surrounding environment before

use (about one hour).

Do not inflate without wrapping the cuff around the upper arm.

Contraindications

The following are precautions for proper use of the device.

Do not apply the cuff on an arm with another medical electrical

equipment attached. The equipment may not function properly.

People who have a severe circulatory deficit in the arm must consult a

doctor before using the device, to avoid medical problems.

-Do not selfdiagnose the measurement results and start

treatment by yourself. Always consult your doctor for evaluation

of the results and treatment.

Do not apply the cuff on an arm with an unhealed wound.

Do not apply the cuff on an arm receiving an intravenous drip or

blood transfusion. It may cause injury or accidents.

Do not use the device where flammable gases such as

anesthetic gases are present. It may cause an explosion.

Do not use the device in highly concentrated oxygen

environments, such as a highpressure oxygen chamber or an -

oxygen tent. It may cause afire or explosion.

4.

4.

4.

4.4.

Parts Identification

Parts Identification

Parts Identification

Parts IdentificationParts Identification

Display

5.

5.

5.

5.5.

Symbols

Symbols

Symbols

SymbolsSymbols

Symbols that appear on the display

Symbols

Function / Meaning

Recommended Action

Appears while measurement

is in progress. It blinks when

the pulse is detected.

Measurement is in progress.

Remain as still as possible.

I.H.B./AFib symbol appears

when an irregular heartbeat

is detected. It may light when

a very slight vibration like

shivering or shaking is

detected.

Previous measurements

stored in memory.

FULL BATTERY

The battery power indicator

during measurement.

LOW BATTERY

The battery power is low

when it blinks.

Replace all batteries with

new oneswhen t he mark

blinks.

Device internal error

Remove the batteries and

press the_START_ button,

and then install the batteries

again. If the error still

appears, contact the dealer.

Cuff

1 to 2 cm

Artery position mark

Secure the fabric fastener

Air hose

Index

and Proper fit range

Proper fit range

Air Socket

Air Connector Plug

Air Hose

At heart level

Refer to the section

""

7

7

7

77.1 No

.1 No

.1 No

.1 No.1 Norm

rm

rm

rmrmal Meas

al Meas

al Meas

al Measal Measurement

urement

urement

urementurement

Press the

_START_

button

The desired pressure

Inflation in progress

Press and hold the

START __

button

Release the

START__

button

to stop inflation

Press and hold the

_START _button

The mark blinks.

Data is cleared.

Release the

button

Select "

" to

clear data.

Turns off automatically

5 seconds

Press and hold the

START __button

Release

the button

mark

Average data

Data number

Stored Data

To next data

Turns off automatically

No data

WHO Classification Indicator

Severe hypertension

Moderate hypertension

Mild hypertension

High normal

Normal

Optimal

Exhausts remaining air

automatically

At heart level

Press the _START_

button

All of the display segments

Zero display

Starts inflation

Pressurizing

Measurement in progress

Sy

stolic pressure

Diastolic pressure

WHO classification

Pulse rate

Turn off with

the

_START _

button

Pressuriz ing

Releasing air

Measurement in progress

Inflat

ion complete

Inflation in progress

Arm Cuff

Note: The AC adapter is an optional accessory.(sold separately)

DC jack

AC adapter plug

Do not roll up shirtsleeve tightly

W

M

M / A

M

Step 1

Step 4

Step 3

Step 2

Battery Compartment

Battery Cover

Air Socket

Air Connector Plug

Display

Air Hose

START

Button

Index

P roper fit range

Artery position mark

MEMORY

Systo

l ic Pressure

Diasto

l ic Pressure

Pulse Rate

Heart Mark

Battery Indicator

I.H.B./AFib

symbol

Pressure Bar Indicator and

WHO Classification Indicator

AC adapter Plug

DC jack

D

Produktspezifikationen