Access Lighting Aero 20670LEDDLP Bedienungsanleitung
Access Lighting
Beleuchtung
Aero 20670LEDDLP
Lies die bedienungsanleitung für Access Lighting Aero 20670LEDDLP (3 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2 Bewertungen. Hast du eine Frage zu Access Lighting Aero 20670LEDDLP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
WHAT YOU NEED
•
Screwdriver
•Wire Cutters
•Wiring Supplies as Specified
by Electrical Code
•
1 x 75W E26 A19 Bulb (20670)
INSTALLATION INSTRUCTIONS
WHAT WE PROVIDE
•
Crossbar
•
Mounting Hardware
•
Canopy with Fixture
•
1 x Glass Shade
•
1 x A19 E-26 LED Bulb
(20670LEDDLP)
COLLECTION
CERTIFICATION: NO. cULus DAMP 20670/20670LEDDLP
20670
20670LEDDLP
APPLICATION MODEL NO.
Ceiling FixtureAero
IMPORTANT SAFETY INSTRUCTIONS
MESURES DE SECURITE A RESPECTURE
Before assembling your ACCESS LIGHTING fixture, please make sure that
you carefully read through this instruction sheet. Save this instruction sheet
and refer to it when additions to or changes in the fixture
configuration are made.
Lisez attentivement ce manuel d’instructions. Enregistrer cette feuille
d'instructions et de s'y référer lorsque les ajouts ou changements dans
la configuration de montage sont faites.
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR.
CONSULTER UN ELECTRICIEN QUALIFIE POUR VOUS ASSURER QUE LES
CONDUCTEURS DE LA DERIVATION SONT ADEQUATS
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONTSTRUCTION
AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
CE PRODUIT DOIT ETRE INSTALLE SELON LE CODE D’INSTALLATION PERTINENT,
PAR UNE PERSONNE QUI CONNAIT BIEN LE PRODUIT ET SON FONCTIONNEMENT
AINSI QUE LES RISQUES INHERENTS
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations
that may occur. It must be understood that common sense, caution and
care, are factors that can’t be built into any product. These factors must
be supplied by the person(s) caring for and operating the fixture.
Read all instructions
Do not install this fixture in hazardous locations.
N'installez pas cet appareil dans des emplacements dangereux.
Do not install any fixture assembly closer than 6 inches from any
curtain or similar combustible material.
Laisser une distance d’au moins 6 pouces entre ce luminaire et la toute
surface combustible.
"WARNING Risk of Fire and Electric Shock."
“CAUTION: Risque d’ Incendie et de Choc Electriques.”
GENERAL INFORMATION
All electrical connections must be in accordance with all ordinances,
Local and the U.S. National Electrical Codes (NEC). These fixtures are
intended for mounting to a standard 4” metal octagon outlet box.
The box must be directly supported by the building structure and U.L.
Recognized.
STEP BY STEP INSTRUCTIONS
Before starting your installation disconnect the Power by turning off the
Circuit Breaker or by removing the fuse at the fuse box. Just turning the
light off at the light switch is not sufficient to prevent electrical shock.
Recommended Dimmers for Supplied Bulb
(ELV) TRON LV- PLU Skylark SE 300
(MLV) CO R OPE Aspire 9530 SW
(TRI LE RAN PWAC) G D Tita n CD703-
CERTIFICATION: NO. cULus DAMP 20670/20670LEDDLP
MOUNT THE CANOPY
Fit the fixture canopy up to the crossbar. Insert the
hanging screws into the designated holes in the canopy.
Secure with the supplied thumb screws.
CONNECT THE WIRES
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nuts. Connect the white
supply wire to the white fixture wire. Secure with the
supplied wire nuts.
Attach the green J-Box wire around
green hexagonal head screw or connect it to the green
supply grounding wire of the fixture.
Secure all wires
with U.L. Certified electrical tape (not supplied).
Tuck all wires carefully into the J-Box.
PREPARE FIXTURE
If there is an existing fixture remove it.
Expose the supply wire from the outlet box .
Secure the crossbar to the J-box with the supplied screws.
Ensure that the additional screws face downward.
CERTIFICATION: NO. cULus DAMP 20670/20670LEDDLP
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO use bulbs tha exceed the NOT t might
maximum wattage, stated on caution label.
CAUTION
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
SECURE GLASS SHADE
Hold the glass shade up to the canopy. Rotate
the glass so that the glass is secured to the canopy.
INSERT THE BULB
Insert the bulb.
DO NOT EXCEED THE MAXIMUM WATTAGE
AS STATED ON THE WARNING LABEL.
VER: 18.11.1
Produktspezifikationen
| Marke: | Access Lighting |
| Kategorie: | Beleuchtung |
| Modell: | Aero 20670LEDDLP |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Access Lighting Aero 20670LEDDLP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung Access Lighting
Bedienungsanleitung Beleuchtung
- Sirui
- Sengled
- RADEMACHER
- Pauleen
- Goobay
- Obsidian
- Martin
- Tellur
- Elgato
- IKEA
- Astera
- Anslut
- Rosco
- Hansa
- Adj
Neueste Bedienungsanleitung für -Kategorien-
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025