Aiwa ABT-160 Bedienungsanleitung


Lies die bedienungsanleitung für Aiwa ABT-160 (16 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 15 Bewertungen. Hast du eine Frage zu Aiwa ABT-160 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/16
ABT-160
Important Safety Instructions
Warning: To prevent fire or shock hazard, do not exposethe unit to rain or moisture.
To avoid electrical shock, do not dismantle. Refer allservicing to qualified service personnel.
1.Please read all of theinstructionscarefully and retain for future reference.
2.Whenusingelectricalappliances,basicsafetyprecautions shouldalwaysbe followed.
3.This appliance is not intended for use by persons (including children)with reduced physical,
sensory or mental capa bilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning useof the appliance by a person responsiblefor
their safety.
4.Thisproduct isnot a toy!Childrenshouldbe supervised to ensure that they do not play
with the appliance.
5.Any repairs must bedone by qualified service personnel. There are no user-serviceable parts
inside. Do not attempt torepair by yourself.
6.Keepthe unit away from sharp edges that couldcause damage.
7.Keepthe unit freefrom dust and away from heat sources, direct sunlight, humidity,
water or otherliquids.
8.Donot immersethe unitinwater orother liquids.
9.Donotoperate theunitifithas beenexposedto water,moistureor any other liquid in
order to prevent electricshock, explosion and/or injury to yourself and damagetothe
unit.
10.Do not usetheunitforanythingother thanits intendeduse.
11.Do not store the unit indirectsunlightor in high humidity conditions.
12.Do not insertforeignobjects intoany openingontheunit.
13.Do not play music at excessivevolume levelsas this can cause hearinglossor damage
the unit.
14.Unplug theadaptor afterthe unit hasbeen used,before it iscleaned and whilstbeing
repaired.
15.Keep the unit away from flammablematerials.
Battery Instructions
1.Replacewith batteries of the same or equivalenttype as recommended.
2.Ensure correct polarity when insertingbatteries.
3. Do not expose batteries to excessive heat sources such as fireand direct sunlight.
4.Removeany batteries fromthe unitwhen itis not beingused for along period of timeto
avoid leakage.
5.Keep batteries outofreach ofchildren.
6.Rechargeable batteries should only be chargedunderadult supervision.
7.Do notthrow in fire, crush,puncture,dismantle or otherwise damage thebatteries.
8.Donotexposebatteriesto heator fireastheymay explode.
9.Donotdisposeof batter iesin yourhouseholdwaste.Contact yourlocalcouncilfor
information on disposalor recycling.
In The Box
1 xBluetoothSpeaker
1 x USB ChargingCable
1 x AuxCable
1 xInstructionManual(thisdocument)
1
Overview
1.Charging Indicator
2.DC 5VCharging Port
3.MicroSD Card Slot
4.AUX Input/ FM Antenna/Reset
5.USB Input
6.M (Mode) Button
7.Next/Volume + Button
8.LED Lighting Button
9. Power/Play/Pause/Hands-free
Button
10.Previous/Volume – Button
2
Charging the Speaker
Charge the speaker fully before using it for the first me.
Connect the small end of the USBcharging cable (included) to the DC5V Charging Port on the
speaker. Connect the larger end of the cableto a suitable AC adaptor (not included). The LED
indicator lights up red when charging.
Once fully charged, the red LED will turn off. Remove the charging cable promptly.
Note: When battery is low, there is an audio indicator.Please charge the speaker as soon as possible.
Turning the Speaker On/Off
Press and hold ‘Power’ Buttonfor around2secondstoturnon/turn off the speaker.
Bluetooth Operation
Make sure thatthe speaker is located within the Bluetooth range of 10 mete rs from the
Bluetooth enabled device.
Press ‘M’ Button to switch to Bluetooth mode.
Enable Bluetooth function on your Bluetooth enabled smartphone, tablet or media
player; navigate tothe Bluetooth setting menu, and search for newdevices. The
Bluetooth name for thisspeaker is ‘Aiwa ABT-160’. You will hear an audio indicator
when pairing is successful.
Press and release ‘–‘or+’ Button to play the previous or next song.
Press and hold ‘–‘ or‘+’Button to reduce or increase the volume.
Answering phone calls
Press ‘Play/Pause’ Button to pick up a call under Bluetooth mode;press it again to
cancel the call.
Press and hold ‘M’ Button to disconnect the Bluetooth function.
Double-click ‘Play/Pause’ Button to hang up.
Note: Unit will be powered off automatically if there is no input under Bluetoothmode within 10
minutes.
FM Radio Operation
Insertthe AUXcableasanantenna.
Press ‘M’ Button to switch to FM mode.
Press and release ‘Play/Pause’ Button tostart auto scan.
Press and rel ease ‘Play/Pause’ Button again to save a channel under auto scan.
Press and release ‘–‘or ‘+’Button to select the previous or next channel.
Press and hold ‘–‘ or‘+’Button to reduce or increase the volume.
3
USB/microSD Operation
Insert a USB or microSDmemory device into the corresponding slot toplay mp3 files
automatically.
Press andrelease ‘Play/Pause’ Button to pause or play the music.
During music playing,press and release ‘–‘or+’ Button to play the previous or next
song.
During music playing,press and hold ‘–‘ or ‘+’ Button to reduce orincrease the
volume.
Important: To avoid damaging the USB/microSD device, do not take it out while musicis being
played from it.
Auxiliary Line-in (AUX) Operation
Use the provided 3.5mm auxiliary audio cable to connect yourexternal device’s (e.g. mp3
player)‘Line Out’ port to the ‘AUX’ port on thespeaker.
Press ‘M’ Button to switch toAUX mode.
Turn on your external device and start playback.
LED Lighting Function
Press and release the ‘Light’ Button to turn on theLED lighting.
Pressand release the ‘Light’ Button repeatedly until the desired lighting mode is selected.
There are 3 lighting modes:
-Rh ythm: Lightingchangeswiththemusicbeing played.
-Lighting changes colour automatically.Breathe:
-Lighting remains in one colour.Fixed:
Technical Specifications
Power Supply: 5V 2A
Speaker: 4Ohms
Output Power: 7W*2
FM FrequencyRange: 87.5-108MHz
CompatibleUSB/microSDFormat: mp3
Max.USB/microSDcard size:32GB
Battery: 7.4V, 1800mAh
4
It takes approx. 3-4 hours to completely charge the product.
Baery run me: around 2.5 hours (at 80% volume)
Reset funcon
If in any case, the speaker buons are not funconing properly, you can try reseng the speaker.
Use a small non-metallic object to press the Reset Buon inside the AUX input port of the
speaker to restart it.


Produktspezifikationen

Marke: Aiwa
Kategorie: Nicht kategorisiert
Modell: ABT-160

Brauchst du Hilfe?

Wenn Sie Hilfe mit Aiwa ABT-160 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten