AMX VARIA-SL50 Bedienungsanleitung

Lies die bedienungsanleitung für AMX VARIA-SL50 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 5 Bewertungen. Hast du eine Frage zu AMX VARIA-SL50 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

QUICK START GUIDE

-VARIASL50

Overview

The AMX V-50 ARIASL(AMX-UTP0501) 5.5” Ultra-Slim, Wall-, MountProfessional-

Grade, Persona- Defined Touch Panelredefines control with personas that fit any

application. Personas include Web Kiosk, Zoom Rooms Controller, AMX Book

Scheduling, and AMX G5 Control.

SettingsButton

Function Button

Sensors USB

MicrophoneSide LEDLAN/POE

FIG. 1V- TP AMX ARIASL50ouch anel

Product Specifications

Varia SL50SPECIFICATIONS

Dimensions (HWD)

5

21

/

32

” x 3

3

/

16

” x

31

/

32

”

( x x 143.4mm 80.8mm 24.3 mm)

Weight

6.1 oz(173 g )

Power Consumption

PoE, 802.3af, 15.4 watt, compatible w/ PoE+

External Power

Supply Required

Optimal performance requires use of one of the

following AMX PoE power supplies (not included):

•PS---POEAFTC, PoE Injector, 802.3AF

Compliant (FG423- 83)

Certifications &

Compliance

•UL

•CE

•CB

•FCC Class B (- 5dB)

Environmental

Operating Temperature

•0°C - – 40° C (32°F 104°F)

•5% - 85% Humidity

Storage Temperature

•-2– 6(4– 1 0°C 0° C °F 40°F)

•

5% - 90% Humidity

Included Accessories

•Mounting Plate

•Mounting Hardware

•

Set Screw

VARIA-SL50 Installation

The VARIA- SL50installs into a standard electrical single gang box (US, UK, EU,

AU) using the included mounting plate.

Power Over Ethernet

Power is supplied via Power Over Ethernet (PoE), utilizing an AMX certified PoE

injector such as the PS---POEAFTC PoE Injector (FG423-83) or compatible

network switch which is classified as ES1 and PS2 output in accordance with

IEC/EN/UL 62368-1. Connect the incoming Ethernet cable to the RJ-45 port on

the VARIA-. SL50

Mounting Plate

The included mounting plate contains hole patterns for standard single gang

electrical . boxes in US, UK, EU, & AU

Set Screw Mounting Plate

FIG. 2 Mounting Plate

STEP 1: Installation Prerequisites

Prior to touch panel installation, install single gang electrical box and properly

terminated category cable (networking cable) in accordance with local laws &

building codes.

STEP 2: Install the Mounting Plate

Screw the mounting plate into standard single gang electricalbox using

appropriate hardware for the box.

STEP 3: Route Category Cable

Route the networking cable thru the large central hole in the mounting plate and

plug it into the RJ- . 45 jackon the back of the touch panel

STEP 4: Mount the Panel to Plate

Using the top tab & slot, insert the panel into the mounting plate. Make sure

the tabs arefully engaged.

STEP 5: Set Screw

Insert & tighten the set screw on the bottom to secure the panel to the mounting

plate.

FIG. 3 BackBox Installation Examples

Caution: This product is only suitable for installations less than or equal to 2m

(6.56ft) high for CE/UL safety.

Removing

To remove the panel, follow the installation directions in reverse.

Produktspezifikationen