APC Back- BE700G Bedienungsanleitung
Seiten 4 Engels UPS
Lies die Bedienungsanleitung für APC Back- BE700G kostenlos online oder lade das PDF herunter. 29 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
User Manual Back-UPS
®
BE550G/BE700G
Caution
• For safety, the Back-UPS ES is shipped with one battery wire disconnected. Small sparks may occur during battery
connection.
• Do not install the unit in direct sunlight, in excessive heat or humidity, or in contact with fluids.
• Connect the power cord directly to a wall outlet; not a surge protector or power strip. The outlet
must be located near the equipment and easily accessible.
Connect the Battery
Overview
Turn on the Back-UPS
Press the ON/OFF switch to turn the unit ON. A single short beep and the green “Power On” indicator confirms that
Back-UPS ES is on and ready to provide protection. The UPS will automatically perform a self-test when power is
applied to the unit, the green LED will flash during the self-test.
Note: Prior to first use, charge the Back-UPS for at least 16 hours to ensure sufficient runtime. The unit is charging
whenever it is connected to utility power, whether the unit is turned ON or OFF.
1
Master Outlet—Connect a master device, such as a computer. See
“Using the power-saving outlets” on page 2.
2
Battery Backup and Surge Protection—These outlets receive
power whenever the unit is ON. During a power outage or other
utility problems (brownouts, over-voltages), these outlets will
receive power from the unit for a limited time. Connect a computer,
monitor, and two other data-sensitive devices into these outlets.
Note that one of these outlets is the Master outlet. See “Using the
power-saving outlets” on page2.
3
Controlled Outlets—Connect peripheral devices. See “Using the
power-saving outlets” on page2.
4
Surge Protection—These outlets provide full-time protection from
surges even if the unit is OFF, but will only supply power when the
unit is ON. Connect a printer, fax machine, scanner, or other
peripherals that do not need battery power during power outages.
Note that if the power-saving feature is enabled, three of these
outlets are controlled by the Master outlet.
5
Data Port—Use the supplied RJ45/USB cable to connect the Back-
UPS unit to a computer to install the software. See “Install the
PowerChute® Personal Edition software” on page2.
6
Circuit Breaker—Push to re-set the circuit breaker.
7
Modem/Phone/Fax—Connect a DSL or dial-up modem, phone,
fax machine, or 10/100 Base-T ethernet equipment. Note: Do not
connect the UPS telephone protection ports to both the
telephone and network system cables at the same time.
8
Wall outlet—Connect the unit to a data line wall outlet.
b
u
0
3
4
a
b
u
0
3
5
a
b
u
0
3
6
a
UK
bu0
5
2
a
Alle Fehlercodes APC UPS 10 Fehlercodes aus 2 Bedienungsanleitungen, mit Bedeutung.
Produktspezifikationen
| Marke: | APC |
| Kategorie: | UPS |
| Modell: | Back- BE700G |
Brauchst du Hilfe?
Wenn Sie Hilfe mit APC Back- BE700G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung UPS APC
APC SMT1500RMI2U Bedienungsanleitung APC Back-UPS 800 Bedienungsanleitung APC Back-UPS 550 Bedienungsanleitung APC Easy UPS SMV Bedienungsanleitung APC RBC125 Bedienungsanleitung APC Back-UPS BX1500LCD Bedienungsanleitung APC SMT3000I-BNDL Bedienungsanleitung APC SMT750RMI2U Bedienungsanleitung
Alle APC UPS Bedienungsanleitungen
Beliebt in UPS
APC Smart-UPS 3000VA Bedienungsanleitung APC Back-UPS Pro BR1500G Bedienungsanleitung APC Smart-UPS SMC1500C Bedienungsanleitung
Bedienungsanleitung UPS
Neueste Bedienungsanleitungen für UPS
Voltcraft FPPS 5-5W Bedienungsanleitung Tripp Lite SmartPro Bedienungsanleitung CyberPower SM180KMFX Bedienungsanleitung CyberPower RT33030KE Bedienungsanleitung CyberPower SM300KMFX Bedienungsanleitung CyberPower OLS3S20KEXL Bedienungsanleitung CyberPower Value800EILCD Bedienungsanleitung CyberPower Value1000EILCD Bedienungsanleitung CyberPower UT1050EI Bedienungsanleitung CyberPower BU600E Bedienungsanleitung