APC Back-UPS Pro Bedienungsanleitung


Lies die bedienungsanleitung für APC Back-UPS Pro (12 Seiten) kostenlos online; sie gehört zur Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieses Handbuch wurde von 70 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 3 Bewertungen. Hast du eine Frage zu APC Back-UPS Pro oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/12
Safety and General Information
Inspect the package contents upon receipt. Notify the carrier and
dealer if there is any damage.
SAVE THESE INSTRUCTIONS - This section contains important
instructions that should be followed during installation and maintenance
of the UPS and batteries.
Inventory
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
This UPS is intended for indoor use only.
Do not operate this UPS in direct sunlight, in contact with fluids, or where there is excessive
dust or humidity.
Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.
Failure to follow these instructions will result in death or serious injury.
CAUTION
RISK OF HYDROGEN SULPHIDE GAS AND EXCESSIVE SMOKE
Connect the UPS power cable directly to a wall outlet.
Battery must be replaced when they reach end of service life.
Batteries must be replaced when the unit indicates battery replacement is necessary.
When replacing batteries, replace with the same number and type of batteries originally
installed in the unit.
Failure to follow these instructions could result in minor or moderate injury and
equipment damage.
bu476a
Coaxial cable
USB communication cable
User Manual Back-UPS Pro
BN 1100/1350/1375/1400/1500 M2
BN 1100/1350/1500 M2-CA

Bewerten Sie dieses Handbuch

4.3/5 (3 Bewertungen)

Produktspezifikationen

Marke: APC
Kategorie: Unterbrechungsfreies Stromversorgungssystem
Modell: Back-UPS Pro
Display-Typ: LCD
Akustische Signale: Ja
USB Anschluss: Ja
Breite: 91 mm
Tiefe: 310 mm
Gewicht: 6530 g
Mitgelieferte Kabel: USB-Kabel
Produktfarbe: Schwarz
Akkuladezeit: 12 h
Akku-/Batterietechnologie: Plombierte Bleisäure (VRLA)
Höhe: 190 mm
Garantiekarte: Ja
Stecker: C14-Koppler
Betriebstemperatur: 0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb: 0 - 95 %
Verpackungsbreite: 138 mm
Verpackungstiefe: 442 mm
Verpackungshöhe: 252 mm
Paketgewicht: 7710 g
Zertifizierung: A-tick, C-tick, CE, GOST, GS Mark, REACH, PEP, EOLI
Kabellänge: 1.83 m
Betriebsanleitung: Ja
Temperaturbereich bei Lagerung: -15 - 45 °C
Luftfeuchtigkeit bei Lagerung: 0 - 95 %
Geräuschpegel: 45 dB
Anzahl Produkte pro Versandkarton: 2 Stück(e)
Batterielebensdauer (max.): 5 Jahr(e)
Batteriekapazität: 66 VAh
Ausgangsleistung: 330 W
Mitgelieferte Software: PowerChute Personal Edition
Nachhaltigkeitszertifikate: RoHS
Produkte pro Palette: 48 Stück(e)
Eingangsfrequenz: 50/60 Hz
Höhe bei Betrieb: 0 - 3000 m
Effizienz: 98.2 %
Anzahl der AC-Ausgänge: 6 AC-Ausgänge
USV-Topologie: Line-Interaktiv
Eingangs-Betriebsspannung (min): 155 V
Eingangs-Betriebsspannung (max): 290 V
Ausgangskapazität: 0.55 kVA
Ausgangs-Betriebsspannung (min): - V
Ausgangs-Betriebsspannung (max): - V
Überspannung Einschätzung: 420 J
Automatische Spannungsregulierung: Ja
AC-Steckertypen: C13-Koppler
Typische Backup-Zeit bei halber Belastung: 11.8 min
Typische Backup-Zeit bei voller Belastung: 3.2 min
Wellenform: Sine
Stromstärke (maximal): 6 A
Druckanstiegsschutz: Ja
Akustische Alarm-Modi: Low battery alarm, Overload alarm
Nominale Eingang Spannung: 230 V
Nominale Ausgang Spannung: 230 V
Hot-Swap-Batterie: Ja
Höhe bei Lagerung: 0 - 15000 m
Batteriepatrone Wechsel: APCRBC110
Kaltstart: Ja
Haltezeit (min.): 6 ms
Haltezeit (max.): 10 ms
Automatischer Batterietest: Ja
Anzahl der Output IEC Jumper: 2
Software-CD: Ja
Überspannungsschutz-Funktionen: Netzwerk

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC Back-UPS Pro benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten