APC Smart-UPS Bedienungsanleitung


Lies die bedienungsanleitung für APC Smart-UPS (50 Seiten) kostenlos online; sie gehört zur Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieses Handbuch wurde von 93 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 47 Bewertungen. Hast du eine Frage zu APC Smart-UPS oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/50
User Manual
Smart-UPS™ Industrial UPS
XU2K0LLXXRCC
120 Vac
Rack-Mount 2U
1Smart-UPS Industrial UPS XU2K0LLXXRCC
Important Safety Messages
SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during
installation and maintenance of the Smart-UPS Industrial UPS and batteries.
Read these instructions carefully and look at the equipment to become familiar with the device before trying to
install, operate, service or maintain it. The following special messages may appear throughout this bulletin or on
the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
The addition of this symbol either to a “Danger” or Warningsafety label indicates that an electrical
hazard exists which will result in personal injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Product Handling Guidelines
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious
injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.
NOTI CE
NOTICE is used to address practices not related to physical injury.
<18 kg
<40 lb
18-32 kg
40-70 lb
32-55 kg
70-120 lb
>55 kg
>120 lb


Produktspezifikationen

Marke: APC
Kategorie: Unterbrechungsfreies Stromversorgungssystem
Modell: Smart-UPS
Akustische Signale: Ja
Gewicht: 13180 g
Produktfarbe: Schwarz
Akkuladezeit: 3 h
Betriebstemperatur: 0 - 40 °C
Paketgewicht: 14550 g
Zertifizierung: C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, GOST, IEC 60950, VDE
LED-Anzeigen: Ja
Temperaturbereich bei Lagerung: -15 - 45 °C
Abmessungen (BxTxH): 137 x 358 x 157 mm
Ausgangsleistung: 500 W
Verpackungsabmessungen (BxTxH): 270 x 500 x 290 mm
Eingangsfrequenz: 50/60 Hz
Höhe bei Betrieb: 0 - 3000 m
Ausgangskapazität: 0.75 kVA
Typische Backup-Zeit bei halber Belastung: 16.4 min
Typische Backup-Zeit bei voller Belastung: 4.8 min
Nominale Eingang Spannung: 230 V
Nominale Ausgang Spannung: 230 V
Hot-Swap-Batterie: Ja
Höhe bei Lagerung: 0 - 15000 m
Ausgang Anschlüsse: 6 x IEC 320 C13 \t\n1 x IEC Jumpers
Eingang Verbindungstyp: IEC-320-C14 inlet
Anstieg der Energiemenge: 340 J

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC Smart-UPS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten