Asaklitt FD390ER30 Bedienungsanleitung

Lies die bedienungsanleitung für Asaklitt FD390ER30 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 43 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 22 Bewertungen. Hast du eine Frage zu Asaklitt FD390ER30 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

GREAT BRITAIN

For consumer contact, please visit www.clasohlson.co.uk and click on customer service.

ENGLISH

1 2

3

Ver. 201207

Rechargeable

LEDcamping lantern

Art.no 31-1978 Model FD390ER30

Please read theentire instruction manual before use and save it for

future reference. Wereserve theright for any errors in text or images

and for making any necessary technical changes to this document.

Ifyou should have any questions concerning technical problems

please contact our Customer Services.

Safety

• This product must not be used by anyone (including children)

suffering from physical or mental impairment. Thisproduct

should not be used by anyone that has not read theinstruction

manual unless they have been instructed in its use by someone

who will take responsibility for their safety.

• Never let children play with theproduct.

• Always turn thelamp off when it is not in use.

• Prolonged use of thelamp when thebattery begins to weaken

will diminish thebattery capacity.

Product description

Powerful LED lamp. Classicshape. 30 LEDs. 12 V charger included.

Care and maintenance

Clean theproduct by wiping it with asoft, damp cloth.

Neveruse abrasive cleaning agents or solvents.

Disposal

When it is time to dispose of this product, do so in accordance with

local regulations. Ifyou are unsure how to proceed, contact your

local authority.

Specifications

Height 34 cm

Battery Lead-acid battery 6 V, 4 Ah

Charging current 180 mA

Charger 12 V DC (+ in the centre)

Current draw Approx. 0.45 A

Mounting theshade

1. Put thehandle into theupright position (fig. 1).

2. Pass theshade down over thehandle and align thenotches with

thehandle fixing nuts (fig. 2 & 3).

12 V charging

1. Turn the on/off switch to the OFF

position and connect the charger

cable to the back of the lantern.

2. Connect the charger cable to your

car's cigarette socket or other

available 12 V power source.

Thered LED below the socket will

indicate that charging is in progress.

Operation

If the battery is completely discharged, it will require about 20 hours

of charging to reach full charge again.

Example:

Charging timeOperating time

5 hoursApprox 2 hours

10 hoursApprox 4 hours

20 hoursApprox 8–10 hours

Note:

• Plug the charger into your vehicle’s 12 V socket*. Never charge

the battery for more than 30 hours; this could seriously drain

and/or damage your vehicle battery.

• Give the lantern a full charge if it is to be stored and not to be

used for a long time.

• If the storage temperature is:

- 10 ºC or lower, charge the battery every 6 months.

- 10–27 ºC, charge the battery every 3 months.

- 27–40 °C, charge the battery every 2 months.

• The battery needs to be fully charged from time to time; the

capacity of the battery will deteriorate if it is merely charged for

short periods at a time.

* Some vehicles have the 12 V socket connected to the ignition

which means the socket has no power when the ignition is off.

Thelantern’s charging current is only 180 mA but don’t forget that

there may be other electrical components in your vehicle which

consume power when the ignition is on. Read your vehicle's

handbook if you areunsure.

Turn theon/off knob clockwise to

turn thelantern on.

Turn theon/off knob

anticlockwise to turn

thelantern off.

Produktspezifikationen