Asus ZenWiFi XT9 Bedienungsanleitung

Lies die bedienungsanleitung für Asus ZenWiFi XT9 (2 Seiten) kostenlos online; sie gehört zur Kategorie Router. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 24 Bewertungen. Hast du eine Frage zu Asus ZenWiFi XT9 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ASUS ZenWiFi XT9

AX7800 Tri Band WiFi Router

Model: XT9

Quick

Start Guide

1

Plug the adapter into the DCIN port, and press the power switch.

2

The power LED will light up when your hardware is ready.

Hardware Explanations

ZenWiFi XT9 Overview

Power switchDCIN port

2.5G / 1G

WAN port

LAN ports 1-3USB 3.2 Gen 1x12.5G / 1G WAN port

Connect your optical modem to this

port with a network cable.

LAN ports 1-3

Connect your PC to a LAN port with

a network cable.

Before Setup

ASUS Router App

AiMesh Setup Steps

Troubleshooting

1

Find two ZenWiFi XT9, and power both on.

2

Use a network cable to connect your optical modem to the WAN

port of either ZenWiFi XT9. This ZenWiFi XT9 will be the AiMesh

router, and the other ZenWiFi XT9 will be the AiMesh node.

3

The LED turns solid blue to indicate that ZenWiFi XT9 is ready for

setup.

Preparing to set up an AiMesh WiFi system

AiMesh router

AiMesh Setup Steps

AiMesh node

Download free ASUS Router APP to set up and

manage your router(s).

AiMesh routerAiMesh node

within

3 meters

Prepare

01

Place your AiMesh router and node within 3 me-

ters of each other during the setup process.

AiMesh node

02

Keep your AiMesh node powered on and stand-

by for AiMesh system settings.

Launch ASUS Router APP, and then follow the

on-screen instructions to finish the AiMesh set-

up.

Launching ASUS Router APP

03

If your AiMesh router cannot find any AiMesh node nearby or synchronization fails, please check the following

and try again.

a

Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters.

b

Your AiMesh node is powered on.

DC Power adapterDC Output: +12V with max 3A current

Operating Temperature0~40oCStorage 0~70oC

Operating Humidity50~90%Storage 20~90%

Specications:

NOTE: When you’re using a wireless backhaul to connect your router and AiMesh

node, the WAN port on your AiMesh node can be used as a LAN port

providing up to 2.5G transmission speed.

Produktspezifikationen