ATen PE1114A Bedienungsanleitung

ATen Nicht kategorisiert PE1114A

Lies die bedienungsanleitung für ATen PE1114A (16 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 3 Bewertungen. Hast du eine Frage zu ATen PE1114A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/16

eco PDU PE Series

SNMP Settings

User Instructions

www.aten.com

NRGence User Help

User Information

Online Registration

Be sure to register your product at our online support center:

Telephone Support

For telephone support, call this number:

User Notice

All information, documentation, and specifications contained in this manual are subject to change

without prior notification by the manufacturer. The manufacturer makes no representations or

warranties, either expressed or implied, with respect to the contents hereof and specifically

disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the

manufacturer's software described in this manual is sold or licensed as is. Should the programs

prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or its

dealer), assumes the entire cost of all necessary servicing, repair and any incidental or

consequential damages resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV interference caused by

unauthorized modifications to this device. It is the responsibility of the user to correct such

interference.

The manufacturer is not responsible for any damage incurred in the operation of this system if the

correct operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT

THE VOLTAGE SETTING IS CORRECT BEFORE USE.

PE Device Safety Notice

International http://support.aten.com

North America http://www.aten-usa.com/product_registration

International 886-2-8692-6959

China 86-10-5255-0110

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

United Kingdom 44-8-4481-58923

Set the maximum permissible breaker protection in the building circuitry to the

current rating specified on the rating plate. Observe all national regulations and

safety codes as well as deviations for breakers.

Only connect the PE Device to a grounded power outlet or a grounded system!

Make sure that the total current input of the connected systems does not exceed

the current rating specified on the rating plate of the PE Device.

There is a risk of explosion if the battery is replaced with an incorrect type.

Dispose of used batteries according to the relevant instructions.

SNMP

iii

Contents

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Eco PDU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

SNMP Trap Receivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Eco Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

SNMP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Synchronizing SNMP Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

MIB Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Set SNMP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Setting Up Thresholds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Setting Device/Outlet Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Reading Device/Outlet Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Produktspezifikationen

Marke:	ATen
Kategorie:	Nicht kategorisiert
Modell:	PE1114A
Produktfarbe:	Schwarz
Stecker:	NEMA 5–15
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	0 - 60 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 80 %
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Gehäusematerial:	Metall
Temperaturbereich bei Lagerung:	-20 - 60 °C
Anzahl der AC-Ausgänge:	14 AC-Ausgänge
AC-Steckertypen:	NEMA 5–15
Stromstärke (maximal):	12 A
Nominale Eingang Spannung:	100-120 V
Nominale Ausgang Spannung:	100-120 V