Atlas Sound Texas Tough TT35-35V Bedienungsanleitung
Atlas Sound
Nicht kategorisiert
Texas Tough TT35-35V
Lies die bedienungsanleitung für Atlas Sound Texas Tough TT35-35V (15 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 7 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 4 Bewertungen. Hast du eine Frage zu Atlas Sound Texas Tough TT35-35V oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/15
©2021 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005957 RevD 4/21 P/N 492378
AtlasIED.com
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Floor-Standing Cabinets
Texas Tough Series
1. Read these instructions. Follow all instructions. Keep these instructions. Heed all warnings.
2. Use eye protection and protective gloves while unpacking the cabinet.
3. Make sure there are enough people to help safely unload and install the system. Empty rack cabinets alone may weigh up to 300 lbs. Moving rack
cabinets can present dangers to other personnel and the incorporated equipment.
CAUTION
©2021 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005957 RevD 4/21 P/N 492378
AtlasIED.com
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Important Safety Instructions
1. These cabinet products are initially provided without installed electrical equipment and therefore are not liable for any hazards/damage incurred
by not following proper safety procedures. Installation, operation, and maintenance personnel should always follow the procedures outlined in
the National Electrical Code and any other regulations mandated by the local authorities having jurisdiction over the installation.
2. The cabinet is designed for installation and use in areas designated as "Restricted Access Location" only.
3. The installation of the cabinet is to be made by qualified service personnel in accordance with local building codes, the Installation Instructions,
and the National Electrical Code.
4. The Listing Mark on the product does not cover any of the electrical equipment, AC or DC, that may be installed in the field. The Product is not
intended to contain or house any open-frame, high-voltage electrical components like open switches, supplementary protectors, circuit breakers,
fuses, relays, etc.
5. The cabinet is intended to house audio, video, information technology, and telecommunications equipment provided with their own fire, electrical,
and mechanical enclosures.
6. Product is evaluated for use in environmentally controlled indoor areas only. The product is not to be used outdoors, in industrial or harsh
environments, or in plenum spaces.
7. The frame of the product may support a maximum load of 2,500 lbs.
8. Use eye protection and protective gloves while unpacking and installing the cabinet.
9. Ensure adequate manpower is available to safely unload and install the product.
Introduction
1. This rack cabinet system is used to house rack-mountable equipment for use in audio, video, and/or data applications for network, voice, data
and video modules / devices and their associated cabling. Final equipment installer must follow individual equipment manufacturer’s installation
instructions.
2. All models support a maximum load up to 2,500 lbs.
3. All models comply to U.S. and Canadian (Bi-National) Standard for Safety of Information Technology Equipment, CAN / CSA-C22.2
No. 60950-1-07, Second Edition, date March 27, 2007, UL 2416, Outline of Investigation for Audio/Video, Information and Communication
Technology Equipment Cabinet, Enclosure and Rack Systems.", Issue 2, dated 2013-07-12.
IEC 62471 - Photobiological safety of lamps and lamp systems.
Required Tools
1. Razor Knife
2. #2 Phillips Cross-Drive Screwdriver (Manual or Auto)
3. Tape Measure (optional)
4.
9
/16" Hex Socket Driver
Produktspezifikationen
| Marke: | Atlas Sound |
| Kategorie: | Nicht kategorisiert |
| Modell: | Texas Tough TT35-35V |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Atlas Sound Texas Tough TT35-35V benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Atlas Sound
8 Juli 2025
8 Juli 2025
8 Juli 2025
26 Juni 2025
12 Juni 2025
12 Juni 2025
11 Juni 2025
5 September 2024
3 September 2024
21 August 2024
Bedienungsanleitung Nicht kategorisiert
- Ambient Recording
- Showtec
- Videotel Digital
- Kendau
- H.Koenig
- Workzone
- LiveU
- Hogue
- Premium Levella
- USAopoly
- Roxio
- Marbo Sport
- Arlo
- Wilson
- Legends
Neueste Bedienungsanleitung für -Kategorien-
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025