Atlona AT-HDDA-4 Bedienungsanleitung


Lies die bedienungsanleitung für Atlona AT-HDDA-4 (9 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Atlona AT-HDDA-4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/9
User Manual
Atlona 1 by 4 HDMI
Distribution Amplifier
AT-HDDA-4
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
2
3. Features ...................................................................................... 3
4. Panel Descriptions
a. Front Panel ...................................................................................... 3
b. Rear Panel ...................................................................................... 4
5. EDID ...................................................................................... 4
7. Specifications ...................................................................................... 6
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Table of Contents
Revision B (3/25/14):
Hardware update
Chipset updated for 4Kx2K cascading Page 3
3
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Introduction
With 4Kx2K pass through the Atlona 1 by 4 HDMI Distribution Amplifier offers a high definition
solution for multi display installations. Field upgradable, with a built in USB port, ensures seamless
firmware updating. With EDID learning mode, the HDDA provides a solution for incompatibilities
and intermittent signals.
Package Contents
Features
• 1 x AT-HDDA-4
• 1 x DC 5V locking power adaptor
• Transmits source signal to multiple displays simultaneously
• Built in EDID management to ensure compatibility
• 4Kx2K pass through
• Using additional HDDAs, cascade the source signal up to 8 times at 4Kx2K*
• Lossy and lossless audio formats pass through (up to Dolby TrueHD
®
and DTS-HD Master Audio™)
• Full 3D pass through
• Field serviceable USB firmware port for quick and easy updating
• LED signal lights to verify status for input and outputs
• HDCP compliant
Panel Description
Front Panel
4
AT-HDDA-4
1
2
3
EDID
INT LEARN
POWER SYNC
1. Power LED: Will light up when the distribution amplifier receives power
2. Sync LED: Illuminates when receiving signal from the source
3. Out LED: Each LED will illuminate for the corresponding connected displays
4. EDID LEDs: LED will illuminate to indicated the current EDID mode
5. EDID button: Press to select between EDID modes
1
2
5
4
3
*8 times cascading only occurs when used with other HDDA-2s or HDDA-4s
- 4 times cascading with HDDA-8s


Produktspezifikationen

Marke: Atlona
Kategorie: Nicht kategorisiert
Modell: AT-HDDA-4
Breite: 433.8 mm
Tiefe: 255 mm
Gewicht: 2610 g
Produktfarbe: Schwarz
Höhe: 44 mm
Betriebstemperatur: 0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb: 20 - 90 %
Paketgewicht: 4200 g
Zertifizierung: CE, FCC, cULus
Temperaturbereich bei Lagerung: -20 - 60 °C
HDCP: Ja
Unterstützte Video-Modi: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p
Unterstützte Grafik-Auflösungen: 640 x 480 (VGA),800 x 600 (SVGA),1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 768 (WXGA),1280 x 800 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1600 x 900,1680 x 1050 (WSXGA+),1920 x 1200 (WUXGA),3840 x 2160,4096 x 2160
Maximale Bildwiederholrate: 75 Hz
Maximale Auflösung: 4096 x 2160 Pixel
Nachhaltigkeitszertifikate: RoHS
Anzahl der HDMI-Ausgänge: 4
Bandbreite: 10.2 Gbit/s
Maximaler Arbeitsabstand: 15 m
HDMI-In: 1
Farbtiefe: 12 Bit
Video Porttyp: HDMI

Brauchst du Hilfe?

Wenn Sie Hilfe mit Atlona AT-HDDA-4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten