Atlona AT-HDR-EX-100CEA-TX Bedienungsanleitung
Atlona
Nicht kategorisiert
AT-HDR-EX-100CEA-TX
Lies die bedienungsanleitung für Atlona AT-HDR-EX-100CEA-TX (9 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Atlona AT-HDR-EX-100CEA-TX oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/9
1
Installation Guide
AT-HDR-EX-100CEA-TX
4K HDR HDBaseT Transmitter with Control and Ethernet
AT-HDR-EX-100CEA-TX
The Atlona AT-HDR-EX-100CEA-TX is a HDBaseT™ transmitter for 4K and high dynamic range
(HDR) content. It supports extension of 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling plus
HDR data, multi-channel audio, Ethernet, control signals, and power up to 330 ft (100 m) over
Category 6/6A cable.
The HDR-EX-100CEA-TX is ideal for use with the AT-HDR-EX-100CEA-RX receiver for
transmitting 4K HDR in point-to-point applications. It can also be used with the AT-UHD-
CLSO-824 and AT-UHD-SW-5000ED for transmitting 4K/UHD @ 60 Hz 4:2:0 signals to the
switchers from a remote source.
IMPORTANT: Visit https://atlona.com/product/at-hdr-ex-100cea-tx for the latest
rmware updates and Installation Guide.
Package Contents
1 x AT-HDR-EX-100CEA-TX
2 x Mounting brackets
4 x Mounting screws
1 x 48V DC power supply
1 x 2-pin captive screw connector
1 x 5-pin captive screw connector
2
Installation Guide
AT-HDR-EX-100CEA-TX
LAN
HDMI OUTHDBaseT IN
TX TX RXRX P
IRRS-232
IN
OPTICAL
DC 48V HDMI IN LANHDBaseT OUTOPTICAL
TX TX RXRX
-
+
OUT
IRRS-232
POWER
LINKTEST
AT-HDR-EX-100CEA-TX
1. LINK
2. FW
3. TEST
4. 5V LOCK
UTILITY
POWER
LINK
AT-HDR-EX-100CEA-RX
FW
LAN
HDMI OUTHDBaseT IN
TX TX RXRX P
IRRS-232
IN
OPTICAL
DC 48V HDMI IN LANHDBaseT OUTOPTICAL
TX TX RXRX
-
+
OUT
IRRS-232
POWER
LINKTEST
AT-HDR-EX-100CEA-TX
1. LINK
2. FW
3. TEST
4. 5V LOCK
UTILITY
POWER
LINK
AT-HDR-EX-100CEA-RX
FW
Panel Descriptions
1 TEST
Quick and easy test for cables when used
with the AT-HDR-EX-100CEA-RX. Use
the button to start the test and the LED to
determine pass or fail.
2 UTILITY
Connect a mini-USB to USB-A cable from
this port to a computer for updating and
testing. Rotate the dial to set the unit into
dierent modes.
3 POWER and LINK LEDs
The power LED will illuminate green when
receiving power. The link LED will glow
yellow when signal is being sent/received
between the transmitter and the receiver.
4 DC 48V
Connect the included power supply to this
port.
5 OPTICAL OUT
This port is only available for audio pass
through when used with the AT-HDR-EX-
100CEA-RX.
6 RS-232 / IR
Connect the included 5-pin captive screw
connector to this port.
7 HDBaseT OUT
Connect an Ethernet cable from this port
to the HDBaseT input on a compatible
receiver.
8 HDMI IN
Connect an HDMI cable from this port to a
UHD/HD source.
9 LAN
Connect an Ethernet cable from this port
to a network switch.
4 75 86 9
2 31
Produktspezifikationen
| Marke: | Atlona |
| Kategorie: | Nicht kategorisiert |
| Modell: | AT-HDR-EX-100CEA-TX |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Atlona AT-HDR-EX-100CEA-TX benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Atlona
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Cabasse
- Thrustmaster
- Terratec
- Pylontech
- WHD
- Altrad
- NWS
- Beaphar
- Giga Copper
- Husqvarna
- Rupert Neve Designs
- BendixKing
- OK
- SanDisk
- Simpson
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025