Atlona AT-HDVS-CAM-CMNT Bedienungsanleitung

Atlona Nicht kategorisiert AT-HDVS-CAM-CMNT

Lies die bedienungsanleitung für Atlona AT-HDVS-CAM-CMNT (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 14.5 Bewertungen. Hast du eine Frage zu Atlona AT-HDVS-CAM-CMNT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Installation Guide
AT-HDVS-CAM-CMNT
1
To install the AT-HDVS-CAM, 4 PA3X30 self-tapping screws, 4 PM3X6 screws, 4 screw stoppers, 1 1/4 20UNC
screw, AT-HDVS-CAM-CMNT, and the AT-HDVS-CAM are needed.
1 Install the 4 screw stoppers in the ceiling.
2 Connect the upper ceiling covering plate to the screw stoppers using the PA3X30 self-tapping screws.
3 Connect the lower ceiling covering plate to the bottom of the AT-HDVS-CAM using the 1/4 20UNC screw.
4 Mount the lower ceiling covering plate to the upper ceiling plate using 3 PM3X6 bolts.
ONKE
12
ONKE
12
Ceiling Mount for the PTZ Camera for the
HDVS-300 Soft Codec Conferencing System
AT-HDVS-CAM-CMNT
NOTE: The camera picture will need to be inverted for video
to be viewed correctly. View the AT-HDVS-CAM manual for
instructions on how to invert video.


Produktspezifikationen

Marke: Atlona
Kategorie: Nicht kategorisiert
Modell: AT-HDVS-CAM-CMNT
Breite: 210 mm
Tiefe: 140 mm
Produktfarbe: Schwarz
Höhe: 9.2 mm
Zweck: PTZ camera
Kompatibilität: Atlona AT-HDVS-CAM, Atlona AT-HDVS-CAM-HDMI, Atlona AT-HDVS-CAM-HDBT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Atlona AT-HDVS-CAM-CMNT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten