AXESS AX-ADCT2 Bedienungsanleitung

Lies die bedienungsanleitung für AXESS AX-ADCT2 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 4 Bewertungen. Hast du eine Frage zu AXESS AX-ADCT2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

AX-ADCT2

AX-ADCT2

AX-ADCT2

AX-ADCT2

AX-ADCT2

AX-ADCT2

INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS

The AX-ADCT2 should be installed on a stereo’s speaker

output wires or the output wires on an OEM amplier of up to 80

watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplier, or on the input

terminals on the OEM speakers.

Wire Color & Function: The audio input wire colors are an EIA

standard for car stereo applications as follows:

YELLOW = BATTERY +12V Input

BLACK = GROUND Input

BLUE = REMOTE +12V Output

THE ABOVE POWER WIRES CAN BE CONNECTED DI-

RECTLY TO THE AMPLIFIER BEING ADDED

WHITE = LEFT Front (+) Input

WHITE/BLACK = LEFT Front (-) Input

GRAY = RIGHT Front (+) Input

GRAY/BLACK = RIGHT Front (-) Input

BLACK/WHITE = Reference Ground (-) (REFERENCE

GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE: Be sure that all audio input connections are polarized or

in phase with each other. That is, the positive output wires from

the audio source need to be connected to the corresponding

positive input wires of the AX-ADCT2. The same goes for the

negative audio wires. Failure to do this will result in poor bass

response and low quality audio.

The AX-ADCT2 should be installed on a stereo’s speaker

output wires or the output wires on an OEM amplier of up to 80

watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplier, or on the input

terminals on the OEM speakers.

Wire Color & Function: The audio input wire colors are an EIA

standard for car stereo applications as follows:

YELLOW = BATTERY +12V Input

BLACK = GROUND Input

BLUE = REMOTE +12V Output

THE ABOVE POWER WIRES CAN BE CONNECTED DI-

RECTLY TO THE AMPLIFIER BEING ADDED

WHITE = LEFT Front (+) Input

WHITE/BLACK = LEFT Front (-) Input

GRAY = RIGHT Front (+) Input

GRAY/BLACK = RIGHT Front (-) Input

BLACK/WHITE = Reference Ground (-) (REFERENCE

GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE: Be sure that all audio input connections are polarized or

in phase with each other. That is, the positive output wires from

the audio source need to be connected to the corresponding

positive input wires of the AX-ADCT2. The same goes for the

negative audio wires. Failure to do this will result in poor bass

response and low quality audio.

The AX-ADCT2 should be installed on a stereo’s speaker

output wires or the output wires on an OEM amplier of up to 80

watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplier, or on the input

terminals on the OEM speakers.

Wire Color & Function: The audio input wire colors are an EIA

standard for car stereo applications as follows:

YELLOW = BATTERY +12V Input

BLACK = GROUND Input

BLUE = REMOTE +12V Output

THE ABOVE POWER WIRES CAN BE CONNECTED DI-

RECTLY TO THE AMPLIFIER BEING ADDED

WHITE = LEFT Front (+) Input

WHITE/BLACK = LEFT Front (-) Input

GRAY = RIGHT Front (+) Input

GRAY/BLACK = RIGHT Front (-) Input

BLACK/WHITE = Reference Ground (-) (REFERENCE

GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE: Be sure that all audio input connections are polarized or

in phase with each other. That is, the positive output wires from

the audio source need to be connected to the corresponding

positive input wires of the AX-ADCT2. The same goes for the

negative audio wires. Failure to do this will result in poor bass

response and low quality audio.

The AX-ADCT2 should be installed on a stereo’s speaker

output wires or the output wires on an OEM amplier of up to 80

watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplier, or on the input

terminals on the OEM speakers.

Wire Color & Function: The audio input wire colors are an EIA

standard for car stereo applications as follows:

YELLOW = BATTERY +12V Input

BLACK = GROUND Input

BLUE = REMOTE +12V Output

THE ABOVE POWER WIRES CAN BE CONNECTED DI-

RECTLY TO THE AMPLIFIER BEING ADDED

WHITE = LEFT Front (+) Input

WHITE/BLACK = LEFT Front (-) Input

GRAY = RIGHT Front (+) Input

GRAY/BLACK = RIGHT Front (-) Input

BLACK/WHITE = Reference Ground (-) (REFERENCE

GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE: Be sure that all audio input connections are polarized or

in phase with each other. That is, the positive output wires from

the audio source need to be connected to the corresponding

positive input wires of the AX-ADCT2. The same goes for the

negative audio wires. Failure to do this will result in poor bass

response and low quality audio.

The AX-ADCT2 should be installed on a stereo’s speaker

output wires or the output wires on an OEM amplier of up to 80

watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplier, or on the input

terminals on the OEM speakers.

Wire Color & Function: The audio input wire colors are an EIA

standard for car stereo applications as follows:

YELLOW = BATTERY +12V Input

BLACK = GROUND Input

BLUE = REMOTE +12V Output

THE ABOVE POWER WIRES CAN BE CONNECTED DI-

RECTLY TO THE AMPLIFIER BEING ADDED

WHITE = LEFT Front (+) Input

WHITE/BLACK = LEFT Front (-) Input

GRAY = RIGHT Front (+) Input

GRAY/BLACK = RIGHT Front (-) Input

BLACK/WHITE = Reference Ground (-) (REFERENCE

GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE: Be sure that all audio input connections are polarized or

in phase with each other. That is, the positive output wires from

the audio source need to be connected to the corresponding

positive input wires of the AX-ADCT2. The same goes for the

negative audio wires. Failure to do this will result in poor bass

response and low quality audio.

The AX-ADCT2 should be installed on a stereo’s speaker

output wires or the output wires on an OEM amplier of up to 80

watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplier, or on the input

terminals on the OEM speakers.

Wire Color & Function: The audio input wire colors are an EIA

standard for car stereo applications as follows:

YELLOW = BATTERY +12V Input

BLACK = GROUND Input

BLUE = REMOTE +12V Output

THE ABOVE POWER WIRES CAN BE CONNECTED DI-

RECTLY TO THE AMPLIFIER BEING ADDED

WHITE = LEFT Front (+) Input

WHITE/BLACK = LEFT Front (-) Input

GRAY = RIGHT Front (+) Input

GRAY/BLACK = RIGHT Front (-) Input

BLACK/WHITE = Reference Ground (-) (REFERENCE

GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE: Be sure that all audio input connections are polarized or

in phase with each other. That is, the positive output wires from

the audio source need to be connected to the corresponding

positive input wires of the AX-ADCT2. The same goes for the

negative audio wires. Failure to do this will result in poor bass

response and low quality audio.

Produktspezifikationen