AXESS AXAMP-TY2 Bedienungsanleitung


Lies die bedienungsanleitung für AXESS AXAMP-TY2 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu AXESS AXAMP-TY2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
AXAMP-TY2
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 2/5/25 INSTAXAMP-TY2
INTERFACE FEATURES
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape
• Wire cutter
• Zip-ties
• Multimeter
TABLE OF CONTENTS
Installation & Installation Options ........................2
Adding Amp(s) to a Factory System ....................3
Troubleshooting.....................................................4
APPLICATIONS
Visit AxxessInterfaces.com for current application list
INTERFACE COMPONENTS
• AXAMP-TY2 Amplifier integration interface
• AXAMP-TY2 interface harness
• AXAMP-TY2 vehicle T-harness
• Bass knob
Amplifier Integration Interface
Fits Toyota 2003-2022
www.MetraOnline.com
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal before
installing this product. Ensure that all installation
connections, especially the air bag indicator lights, are
plugged in before reconnecting the battery or cycling
the ignition to test this product.
NOTE: Refer also to the instructions included with the
aftermarket accessory before installing this device.
Designed for non-amplified models
Provides 6 channels of 5-volt RMS audio
Non-fading full range output (Channels 5 & 6)
Includes plug-n-play harnessing
Simple behind the radio installation
No programming required
Dual colored LED Display
Input: 50 Watts per channel
Amp turn-on trigger (DC) 250mA
2 channel S/PDIF out (Front)
For Dash Disassembly Instructions, refer
to metraonline.com. Enter the year, make,
and model of the vehicle in the Vehicle Fit
Guide for Radio Install kits.
Visit AxxessInterfaces.com for more detailed
information about the product and up-to-date
vehicle specific applications.
2
Adding a full-range amplifier and subwoofer to a factory system:
This feature offers the ability to add a full-range amp and sub to a factory system. (Refer to Page 3)
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Disassemble the dash, unplug all connectors, and then remove the factory radio.
2. Install the AXAMP-TY2 vehicle T-harness to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. Plug the AXAMP-TY2 vehicle T-harness to the AXAMP-TY2 interface.
4. Plug the AXAMP-TY2 interface harness to the AXAMP-TY2 interface.
5. Connect the amp turn-on wire.
6. Adjust your aftermarket amplifier to a desired listening level.
7. The Bassknob is used to adjust the output of channels 5 & 6 of the AXAMP.
Adjustment is as follows:
Counterclockwise turn lowers the volume of channels 5 & 6.
Clockwise turn raises the volume of channels 5 & 6.
* For dash disassembly instructions, refer to metraonline.com. Enter the year, make,
and model of the vehicle in the Vehicle Fit Guide and find instructions under Metra
Radio Install kits.
INSTALLATION OPTIONS INSTALLATION


Produktspezifikationen

Marke: AXESS
Kategorie: Nicht kategorisiert
Modell: AXAMP-TY2

Brauchst du Hilfe?

Wenn Sie Hilfe mit AXESS AXAMP-TY2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten