AXESS AX-ADXSVI-AU1 Bedienungsanleitung
AXESS
Nicht kategorisiert
AX-ADXSVI-AU1
Lies die bedienungsanleitung für AXESS AX-ADXSVI-AU1 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 12 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 6.5 Bewertungen. Hast du eine Frage zu AXESS AX-ADXSVI-AU1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4

METRA. The World’s best kits.™ metraonline.com1-800-221-0932 © COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION
Installation Instructions for AX-ADXSVI-AU1
REV. 9/26/2014 INSTAX-ADXSVI-AU1
(continued on next page)
AX-ADXSVI-AU1
Audi CAN interface 2006-2013
Caution: Metra recommends disconnecting the negative battery terminal before
beginning any installation. All accessories, switches, and especially air bag indicator
lights must be plugged in before reconnecting the battery or cycling the ignition.
*Note: Refer also to the instructions included with the aftermarket radio.
AUDI
A3* 2006-2013
A4/RS 4/S4 w/ NAV 2005-2008
A4/RS 4/S4 2007-2008
A4/RS 4/S4* 2006
TT 2008-2013
*Note: Only for models with either a
Symphony Plus or NAV radio.
APPLICATIONS
FEATURES
Note: This harness must be used in conjunction with the AX-ADXSVI.
• Providesaccessory(12-volt10-amp)
• RetainsR.A.P.(retainedaccessorypower)
• ProvidesNAVoutputs(parkingbrake,reverse,andspeedsense)
• PrewiredASWC-1harness(ASWC-1soldseparately)
• Retainsbalanceandfade
• Micro“B”USBupdatable
Connections to be made
From the XSVI-AU1 harness to the aftermarket radio
(a) From the 12-pin harness:
• Connectthe wiretotheaccessorywire.Red
• Connectthe wiretotheilluminationwire,iftheaftermarketradiohasOrange
noilluminationwire,tapeoffthe wire.Orange
• Connectthe wiretotheampturnonwire(thiswiremustbeBlue/White
connectedtohearsoundfromthefactoryamplifier).
There is a wire on the 40-pin harness to connect as well.Note: Blue
Thefollowingwiresareforaftermarketmultimedia/navigationradiosthatprovide
thesewires(ifnotrequired,tapethemoffanddisregardthem):
• Connectthe wiretotheparkingbrakewire(ifapplicable).Light Green
• Connectthe wiretothereversewire(ifapplicable).Green/Purple
• The wirewillnotbeused,tapeitoffanddisregardit.Blue/Pink
Note: This wire will be on the 40-pin harness instead.
(b) From the 40-pin harness:
• Connectthe and wirestothegroundwire.Black Black/White
• ConnecttheYellow wiretothebatterywire.
• Connectthe wiretotheampturnonwire(thiswiremustbeconnectedBlue
tohearsoundfromthefactoryamplifier).
Thefollowingwireisforanaftermarketmultimedia/navigationradiothat
providesthiswire,ifnotrequired,tapeitoffanddisregardit:
• Connectthe wiretothespeedsensewire(V.S.S.),ifapplicable.Blue/Pink
INTERFACE COMPONENTS
•XSVI-AU1harness
TOOLS REQUIRED
•Cuttingtool•Tape•Crimpingtool
•Connectors(i.e.butt-connectors,bellcaps,etc.)

AX-ADXSVI-AU1
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION
K PNOWLEDGE IS OWER
Enhance your installation and fabrication skills by
enrolling in the most cognized and spected re re
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for mo information and take steps re
toward a better t omorrow.
Metra recommends MECP
certified technicians
IMPORTANT WARNING
Thisproductincludesinstructionsforinstallationwhichmustbecarefullyfollowed.The
instructionsarewordedinsuchamannertoassumethattheinstalleriscapableof
completingthesetypeofelectronicinstallations.Ifyouareunclearastowhatyouare
instructedtodoorbelievethatyoudonotunderstandtheinstructionssoastoproperly
andsafelycompletetheinstallationyou should consult a technician who does have this
knowledge and understanding.
Failure to follow these instructions carefully and to install the interface as described
could cause harm to the vehicle or to safety systems on the vehicle. Interference with
certain safety systems could cause harm to persons as well. If you have any questions
in this regard please call the Help line or Metra at 1-800-221-0932 for assistance.
For non-BOSE systems:
• Disregardthe RCA,itwillnotbeusedinthisapplication. White
• Disregardthe RCA,itwillnotbeusedinthisapplication.Gray
• Connectthe RCAtotheleftrearRCAoutput.Green
• Connectthe RCAtotherightrearRCAoutput.Purple
• Connectthe wiretotheleftfrontpositivespeakeroutput.White
• Connectthe wiretotheleftfrontnegativespeakeroutput.White/Black
• Connectthe wiretotherightfrontpositivespeakeroutput.Gray
• Connectthe wiretotherightfrontnegativespeakeroutput.Gray/Black
Tapeoffanddisregardthefollowingwires,theywillnotbeusedin
thisapplication:
• The wires.Green,Green/Black,Purple,Purple/Black
For BOSE systems:
• Connectthe RCAtotheleftfrontRCAoutput.White
• Connectthe RCAtotherightfrontRCAoutputGray
• Connectthe RCAtotheleftrearRCAoutput.Green
• Connectthe RCAtotherightrearRCAoutputPurple
Tapeoffanddisregardthefollowingwires,theywillnotbeusedin
thisapplication:
• TheGreen,Green/Black,Purple,Purple/Black,White,White/Black,
Gray,and wires.Gray/Black
Note: It is highly recommended that the radio being used has 2 sets
of RCA outputs to retain balance and fade; 3 sets if a sub-woofer amplifier
will be added.
(c) From the 12-pin harness (ASWC-1 pre-wired harness):
• ThisharnessistobeusedinconjunctionwiththeoptionalASWC-1(not
included)toretainsteeringwheelcontrols.IftheASWC-1isnotbeing
used,disregardthisharness.Ifitwillbeused,pleaserefertotheASWC-1
instructionsforradioconnectionsandprogramming.
Note: Disregard the harness that comes with the ASWC-1.
Installing the AX-ADXSVI-AU1
• Connectthe12-pinharnessintotheAX-ADXSVIinterface(soldseparately).
• Connectthe40-pinharnessintothevehicle.
• Withallconnectionscompleted,reconnectthenegativebatteryterminal.
• Initializetheinterfacebyturningtheignitiononfor30seconds,thenturnthe
ignitionbackoff,thenbackonagain.
Troubleshooting
• IfthevehiclehasenginenoiseafterinstallingtheAX-ADXSVI-AU1,useAxxess
partnumberAX-AGL610,qty.(2).

METRA. The World’s best kits.™ metraonline.com1-800-221-0932 © COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION
Installation Instructions for AX-ADXSVI-AU1
REV. 9/26/2014 INSTAX-ADXSVI-AU1
(continúa en la página)
AX-ADXSVI-AU1
Audi CAN interfase 2006-2013
Precaución: Metra recomienda desconectar el terminal negativo de la batería antes de
comenzar cualquier instalación. Todos los accesorios, interruptores y, especialmente,
las luces indicadoras de airbag deben estar enchufados antes de volver a conectar la
batería o comenzar el ciclo de ignición.
*Note: Remítase a las instrucciones incluidas con el radio de postventa.
AUDI
A3* 2006-2013
A4/RS 4/S4 w/ NAV 2005-2008
A4/RS 4/S4 2007-2008
A4/RS 4/S4* 2006
TT 2008-2013
*Note: Only for models with either a
Symphony Plus or NAV radio.
APLICACIONES
CARACTERÍSTICAS
Nota: Este arnés debe utilizarse en conjunto con el AX-ADXSVI.
• Proporcionaaccesorio(12voltios10amperes)
• RetieneR.A.P.(corrientedeaccesorioretenida)
• ProporcionasalidasdeNAV(frenodemano,reversaysensor
develocidad)
• ArnésASWC-1precableado(elASWC-1sevendeporseparado)
• Retieneelbalanceylaintensidad
• Actualizablepormicro“B”USB
Conexiones que se deben hacer
Del arnés XSVI-AU1 al radio de mercado secundario
(a) Desde el arnés de 12 pins:
• Conecteelcable conelcabledeaccesorios.rojo
• Conecteelcable conelcabledeiluminaciónsielradiodemercadoanaranjado
secundarionotienecabledeiluminación,encínteloalcableanaranjado.
• Conecteelcable alcabledeencendidodelamplificador(esteazul/blanco
cabledebeestarconectadoparaescucharsonidodelamplificadordefábrica).
Hay un cable azul en el arnés de 40 pins que también debe conectar.Nota:
Lossiguientescablessonpararadiosdemercadosecundarioconmultimedios/
navegaciónquetienenestoscables(sinoserequieren,encínteloseignórelos):
• Conecteelcable alcabledefrenodemano(siaplica).verde claro
• Conecteelcable alcabledereversa(siaplica). verde/púrpura
• Elcable noseutilizará,encínteloeignórelo.azul/rosa
Nota: Este cable se encontrará en el arnés de 40 pins.
(b) Desde el arnés de 40 pins:
• Conecteelcable yelcablenegro/blancoconelcabledetierra.negro
• Conecteelcable conelcabledelabatería.amarillo
• Conecteelcable alcabledeencendidodelamplificador(estecabledebeazul
estarconectadoparaescucharsonidodelamplificadordefábrica).
Elsiguientecableesparaunradiodemercadosecundarioconmultimedios/
navegaciónquetieneestecable;sinoserequiere,encínteloeignórelo:
• Conecteelcable alcabledelsensordevelocidad(V.S.S),siaplica.azul/rosa
COMPONENTES DE LA INTERFASE
•ArnésXSVI-AU1
HERRAMIENTAS REQUERIDAS
•Cortador•Cinta•Pelacables
•Conectores(ejemplo:conectoresdeextremo,decampana,etc.)
Produktspezifikationen
Marke: | AXESS |
Kategorie: | Nicht kategorisiert |
Modell: | AX-ADXSVI-AU1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit AXESS AX-ADXSVI-AU1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert AXESS
10 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
Bedienungsanleitung Nicht kategorisiert
- Parallels
- Kreg
- Cowon
- Baja Mobility
- Busch-Jaeger
- Zalman
- Ravensburger
- Lightspeed
- Blue Lantern
- Avanti
- Xtreme
- Kitchen Brains
- Saitek
- Devolo
- Thorens
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025