AXESS AX-PS Bedienungsanleitung

Lies die bedienungsanleitung für AXESS AX-PS (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 2 Bewertungen. Hast du eine Frage zu AXESS AX-PS oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

AX-PS

AX-PS

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. INSTAX-PS4/11/23

AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. INSTAX-PS4/11/23

A

B

AX-PS

INTERFACE COMPONENTS

• AX-PS Timer with wiring harness

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun, solder, and heat shrink

• Tape

• Wire cutter

• Zip-ties

Universal-Amp Turn On/Off Timer

SETUP/SETTINGS

(Timer settings 0-30 seconds*)

*Turn-On Delay

•

Press left button (A) to enter the Turn-On delay setting,

the . Red LED flashes

•

Press left (A) and right (B) button to set up the delay, up to 30 seconds. If there is no

action for 3 seconds, it will return to display mode.

*Turn-Off Delay

• Press right button (B) to enter into Turn-Off Delay setting, the . Green LED flashes

• Press left

(A)

and right (B) button to set up the delay up to 30 seconds. If there is no

action for 3 seconds, it will return to display mode.

Note: Display will turn off after 3 minutes on inactivity. To turn on the display press

either the A or B button

Blue: Remote turn on output

Red: Remote turn on input

Yellow: 12v Constant

Black: Ground

SPECIFICATIONS

Working Voltage: 10v-16v

Trigger output current: 500mA

Trigger input Current: 1mA

TURN-ON DELAY

(GREEN LED)

TURN-OFF DELAY (RED LED)

A

B

AX-PS

INTERFACE COMPONENTS

• AX-PS Timer with wiring harness

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun, solder, and heat shrink

• Tape

• Wire cutter

• Zip-ties

Universal-Amp Turn On/Off Timer

SETUP/SETTINGS

(Timer settings 0-30 seconds*)

*Turn-On Delay

•

Press left button (A) to enter the Turn-On delay setting,

the . Red LED flashes

•

Press left (A) and right (B) button to set up the delay, up to 30 seconds. If there is no

action for 3 seconds, it will return to display mode.

*Turn-Off Delay

• Press right button (B) to enter into Turn-Off DelayGreen LED flashes setting, the .

• Press left

(A)

and right (B) button to set up the delay up to 30 seconds. If there is no

action for 3 seconds, it will return to display mode.

Note: Display will turn off after 3 minutes on inactivity. To turn on the display press

either the A or B button

Blue: Remote turn on output

Red: Remote turn on input

Yellow: 12v Constant

Black: Ground

SPECIFICATIONS

Working Voltage: 10v-16v

Trigger output current: 500mA

Trigger input Current: 1mA

TURN-ON DELAY

(GREEN LED)

TURN-OFF DELAY (RED LED)

Produktspezifikationen