AXESS AXAMP-CH5 Bedienungsanleitung

Lies die bedienungsanleitung für AXESS AXAMP-CH5 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu AXESS AXAMP-CH5 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

AXAMP-CH5

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 12/17/24 INSTAXAMP-CH5

INTERFACE FEATURES

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape

• Wire cutter

• Zip-ties

• Multimeter

TABLE OF CONTENTS

Installation & Installation Options2 ........................

Adding Amp/Amps to a Factory System3 .............

Rebooting the U-Connect Radio4 ..........................

Troubleshooting.....................................................5

APPLICATIONS

Visit for current application listAxxessInterfaces.com

INTERFACE COMPONENTS

• AXAMP-CH5 Amplifier Integration interface

• AXAMP-CH5 interface harness

• AXAMP-CH5 vehicle T-harness

• Bass knob

• LD-DSP-RPAD2

Amplifier Integration Interface

Fits Chrysler Select Models

2014-2023

www.MetraOnline.com

MetraOnline.com may be used to assist

with dash assembly instructions. Simply

enter your Year, Make, Model vehicle

into the vehicle fit guide and look for the

Dash Kit Installation Instructions.

• Designed for both amplified and non-amplified vehicles

• Provides 6 channels of 5-volt RMS audio

• Channels 5 & 6 are non-fading full range output

• Includes plug-n-play harnessing

• Simple behind the radio installation

• Dual colored LED feedback

• Input Power handling 50 Watts per channel

• Amp on turn-on output is rated at 250mA

• 2 channel S/PDIF out (Fronts)

ATTENTION: With the key out of the ignition, disconnect

the negative battery terminal before installing this product.

Ensure that all installation connections, especially the air

bag indicator lights, are plugged in before reconnecting

the battery or cycling the ignition to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

Produktspezifikationen