AXESS AXDSPX-MI1 Bedienungsanleitung
Lies die bedienungsanleitung für AXESS AXDSPX-MI1 (16 Seiten) kostenlos online; sie gehört zur Kategorie Prozessor. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu AXESS AXDSPX-MI1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/16
AXDSPX-MI1
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 11/10/21 INSTAXDSPX-MI1
Google Play Store
Apple App Store
iOS 12.1 or higher
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip-ties • Multimeter
TABLE OF CONTENTS
Installation Options ...............................................2
Installation .............................................................2
Connections ........................................................3-4
Mobile App ........................................................5-14
Specifications ........................................................15
Mitsubishi DSPX Interface w/ Pre-Wired
Harness
(for non-amplified vehicles)
1993-2012
• Includes a DSP (Digital Signal Processor)
• Selectable 31 Band Graphic EQ or 5 Band Parametric EQ
• 10 individually assignable outputs
• Independent equalization on each of the 10 outputs
• Independent high pass, low pass, and bandpass filters
• Each channel can be delayed independently up to 10ms
• Clipping detection and limiting circuits
• Designed for non-amplified models
• Easy behind the radio installation with pre-wired harness
• Bass knob included for level control of subwoofer amp
•
Settings adjusted via Bluetooth® in a smart device application (tablet
or mobile phone), compatible with both Android and Apple devices
• Read, write, and store configurations for future recall
• Password protect feature available in the mobile app
• USB Micro B updatable
• AXDSPX-MI1 interface
• AXDSPX-MI1 interface harness
• AXDSPX-MI1 vehicle T-harness • Bass knob
• AXDSPX-MI1 display T-harness
APPLICATIONS
Visit axxessinterfaces.com for current application list
2
Adding a subwoofer to a factory system:
The diagram on Page 3 shows the connections that need to be made to add a subwoofer to the
factory system.
Note: RCA jacks sold separately.)
Adding a full-range of amps & subwoofer to a factory system:
The diagram on Page 4 shows the connections that need to be made to add: Subwoofer (RCA jacks
sold separately)
Amplifier (SPDT relay E-123 required) or
Additional Amp (RCA jacks sold separately).
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Disassemble the dash, unplug all connectors, and then remove the factory radio. †
2. Install the AX-DSPX-MI1 vehicle T-harness to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. Plug the AX-DSPX-MI1 vehicle T-harness to the AX-DSPX-MI1 interface.
4. Plug the AX-DSPX-MI1 interface harness to the AX-DSPX-MI1 interface.
5. Download and install the AX-DSP-XL app from the Google Play Store or Apple App Store.
6. Open the app then select the Bluetooth Connection tab. Follow the instructions to
pair the mobile device to the interface. Refer to page 6 for more information.
7. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down ‡
button to save the configuration. Refer to page 7 for more information.
8. Connect the amp turn-on wire.
9. Adjust the settings in the app as desired. Press the Lock Down ‡ button to save any
new configurations.
† For dash disassembly instructions, refer to metraonline.com. Enter the year, make,
and model of the vehicle in the Vehicle Fit Guide and find instructions under Metra
Radio Install kits.
‡ Anytime the interface is locked down the key must be cycled off then back on.
INSTALLATION OPTIONS I N STALL AT I O N
Produktspezifikationen
| Marke: | AXESS |
| Kategorie: | Prozessor |
| Modell: | AXDSPX-MI1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit AXESS AXDSPX-MI1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Prozessor AXESS
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
Bedienungsanleitung Prozessor
- TC Helicon
- RDL
- Manley
- SEADA
- BZBGear
- Siig
- RGBlink
- Sonifex
- Avenview
- Yamaha
- Datapath
- Bose
- Arturia
- Roland
- Digitus
Neueste Bedienungsanleitung für -Kategorien-
9 Juli 2025
28 Juni 2025
25 Juni 2025
24 Juni 2025
24 Juni 2025
24 Juni 2025
23 Juni 2025
23 Juni 2025
23 Juni 2025
22 Juni 2025