AXESS AXDSPX-TY1 Bedienungsanleitung
Lies die bedienungsanleitung für AXESS AXDSPX-TY1 (16 Seiten) kostenlos online; sie gehört zur Kategorie Prozessor. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 3 Bewertungen. Hast du eine Frage zu AXESS AXDSPX-TY1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/16
AXDSPX-TY1
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 4/19/23 INSTAXDSPX-TY1
Google Play Store
Apple App Store
iOS 12.1 or higher
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Multimeter
TABLE OF CONTENTS
Installation Options ...............................................2
Installation .............................................................2
Connections ........................................................3-4
Mobile App ........................................................5-13
Specifications ....................................................... 14
Toyota DSP Interface With Pre-Wired Harness
2010-Up
• Designed for amplified models
• Includes a DSP (Digital Signal Processor)
• 31 Band graphic EQ
• 10 individually assignable outputs
• Independent equalization on each of the 10 outputs
• Independent high pass, low pass, and bandpass filters
• Each channel can be delayed independently up to 10ms
• Clipping detection and limiting circuits
• Easy behind the radio installation with pre-wired harness
• Bass knob included for level control of subwoofer amp
• Settings adjusted via Bluetooth
®
in a smart device application (tablet
or mobile phone), compatible with both Android and Apple devices
• Read, write, and store configurations for future recall
• Password protect feature available in the mobile app
• Micro-B USB updatable
• AXDSPX-TY1 interface
• AXDSPX-TY1 interface harness
• AXDSPX-TY1 vehicle T-harness • Bass knob
APPLICATIONS
Visit axxessinterfaces.com for current application list
2
Adding a sub to a factory system:
This feature offers the ability to add a subwoofer to a factory system. (refer to page 3)
Adding a full-range amp & sub to a factory system:
This feature offers the ability to add a full-range amp and sub to a factory system
†
. (refer to page 4)
†
The factory amp must be bypassed/unplugged.
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Remove the factory radio †, then unplug all connectors.
2. Install the AX-DSPX-TY1 vehicle T-harness to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. Plug the AX-DSPX-TY1 vehicle T-harness to the AX-DSPX-TY1 interface.
4. Plug the AX-DSPX-TY1 interface harness to the AX-DSPX-TY1 interface.
5.
Download and install the AXDSP-X app from the Google Play Store or Apple App Store.
6. Open the app then select the Bluetooth Connection tab. Follow the instructions to
pair the mobile device to the interface. Refer to page 6 for more information.
7. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down ‡
button to save the configuration. Refer to page 7 for more information.
8. Connect the amp turn-on wire.
9. Adjust the settings in the app as desired. Press the Lock Down ‡ button to save any
new configurations.
† Refer to Metra online for dash disassembly. If Metra makes a dash kit for the vehicle,
disassembly will be within those instructions.
‡ Anytime the interface is locked down the key must be cycled off then back on
INSTALLATION OPTIONS I N S TALLATIO N
Produktspezifikationen
| Marke: | AXESS |
| Kategorie: | Prozessor |
| Modell: | AXDSPX-TY1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit AXESS AXDSPX-TY1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Prozessor AXESS
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
Bedienungsanleitung Prozessor
- Bogen
- BSS Audio
- Solid State Logic
- Summit Audio
- Vivolink
- DataVideo
- SPL
- Allen & Heath
- Digitus
- Lindell Audio
- Intel
- Empirical Labs
- Radial Engineering
- FabFilter
- Alto
Neueste Bedienungsanleitung für -Kategorien-
9 Juli 2025
28 Juni 2025
25 Juni 2025
24 Juni 2025
24 Juni 2025
24 Juni 2025
23 Juni 2025
23 Juni 2025
23 Juni 2025
22 Juni 2025