AXESS AXPIO-JL1 Bedienungsanleitung
Lies die bedienungsanleitung für AXESS AXPIO-JL1 (32 Seiten) kostenlos online; sie gehört zur Kategorie Autoradio. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 3 Bewertungen. Hast du eine Frage zu AXESS AXPIO-JL1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/32
AXPIO-JL1
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 3/20/24 INSTAXPIO-JL1
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Panel removal tool • Phillips screwdriver
• Torx screwdrivers
TABLE OF CONTENTS
Dash Disassembly ........................................................2
Kit Assembly
- Radio Provision ..........................................................2
- Pioneer Modular DDIN Radio Provision ...............3
Axxess Interface Installation ............................... 4-16
Jeep Wrangler
JL
2018.5-2023 (Excluding 4XE Models)
Note:
This kit will function in both Single-Zone and Dual-Zone vehicles:
• All HVAC functions will be retained.
• Single-Zone vehicles will only get status feedback of the HVAC functions,
while Dual-Zone vehicles can also be controlled through the radio screen.
• Compass is only retained on vehicles equipped with the UConnect 3
(5" touchscreen).
• The External Speaker is only required in vehicles with safety group features.
Attention! Designed specifically for Pioneer’s DMH-W4600NEX/WC4660NEX.
Pioneer 9" DMH-WC6600NEX will require the Metra Floating Mount Kit
109-UN02. (sold separately)
KIT COMPONENTS
• A) Radio bezel • B) Shallow mount brackets (2) • C) Modular radio brackets (2) • D) Panel clips (4)
A B C D
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Included with Kit
Antenna Adapter: Included with Kit
GPS Antenna Adapter: Included with Kit
Visit AxxessInterfaces.com for up-to-date
vehicle specific applications.
Product Info
2
DASH DISASSEMBLY KIT ASSE MB LY
1. Unsnap and remove the panel below the
steering column. (Figure A)
2. Using the panel removal tool, carefully
unclip the climate control panel, unplug
the HVAC and start/stop button, and
then set aside. (Figure B)
3. Remove (2) Phillips screws securing the
radio trim panel, then, starting at the
bottom, unclip and remove the panel.
(Figure C)
4. Remove (4) Phillips screws securing the
factory radio, disconnect the wiring, and
then remove the radio.
(Figure A)
(Figure B)
(Figure C)
(Figure A)
(Figure B)
Radio provision
1. Secure the
shallow radio brackets
to
the radio using screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or Axxess.
3. Reconnect the negative battery terminal
and test the Pioneer radio for proper
operation.
4. Place the radio into the dash, then
secure using the factory screws.
5. Attach (4)
panel clips
provided with this
kit onto the
radio bezel
, and then snap
the bezel over the radio. (Figure B)
6. Reassemble the dash in the reverse
order of disassembly to complete
the installation.
Produktspezifikationen
| Marke: | AXESS |
| Kategorie: | Autoradio |
| Modell: | AXPIO-JL1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit AXESS AXPIO-JL1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Autoradio AXESS
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
Bedienungsanleitung Autoradio
- Vieta
- Autovision
- VDO Dayton
- Sanyo
- JVC
- Snooper
- Hertz
- Nedis
- Renault
- Clarion
- Shuttle
- SoundMAX
- Lanzar
- Audison
- VW
Neueste Bedienungsanleitung für -Kategorien-
10 Juli 2025
10 Juli 2025
10 Juli 2025
9 Juli 2025
7 Juli 2025
6 Juli 2025
5 Juli 2025
2 Juli 2025
21 Juni 2025
21 Juni 2025