Axxess AX-VW93-CAM Bedienungsanleitung

Lies die bedienungsanleitung für Axxess AX-VW93-CAM (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 6 Bewertungen. Hast du eine Frage zu Axxess AX-VW93-CAM oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

AX-VW93-CAMAX-VW93-CAMAX-VW93-CAM

INSTALLATION INSTRUCTIONSINSTALLATIONINSTRUCTIONSINSTALLATIONINSTRUCTIONS

REV. 3/1/18REV. 3/1/18REV. 3/1/18© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.comIntegrate • AxxessInterfaces.comIntegrate • AxxessInterfaces.com

AX-VW93-CAM

Volkswagen Golf (MK VII)

Camera Retention Interface

2012*

Connections to be made

• Connect the Black wire to chassis ground.

• Connect the Red wire to accessory power.

• Connect the Green wire to reverse power (switched).

• Connect the Yellow RCA jack to the aftermarket backup camera.

Installing the Interface

• Remove the main connector from the radio, then connect the

male

plug

from the

AX-VW93-CAM

into the radio.

• Connect the

male

factory connector into the

female

plug from the

AX-VW93-CAM

.

• Connect the

AX-VW93-CAM harness

into the AX-VW93-CAM interface.

• Test for correct operation.

• Allows a camera to be added to the factory radio

• Plug-and-play, no cutting of wires required

• Designed for NTSC cameras

• Auto switch in reverse gear

INTERFACE FEATURES

* For vehicles with Composition Media (MIB), Discovery Pro (MIB), Composition

Media (MIB STD2), Discover Media (MIB STD2).

* Vehicle must have an OPS (Optical Parking Sensor) head unit.

* Not compatible with: 3Q0035820A, 3Q0035820, 3Q0035819A, 3Q0035819,

3Q0035812, 5G0035820A, 5G0035820, 5G0035819A, 5G0035819, 5G0035812.

* For Professional installation ONLY, requires specialist equipment and knowledge to

program vehicle on-board settings to enable camera operation.

* Camera must be activated via VCDS. Head unit must be coded.

AX-VW93-CAM

Volkswagen Golf (MK VII)

Camera Retention Interface

2012*

AX-VW93-CAM

Volkswagen Golf (MK VII)

Camera Retention Interface

2012*

Connections to be made

• Connect the Blackwire to chassis ground.

• Connect the Redwire to accessory power.

• Connect the Greenwire to reverse power (switched).

• Connect the YellowRCA jack to the aftermarket backup camera.

Installing the Interface

• Remove the main connector from the radio, then connect the

male

plug

from the

AX-VW93-CAM

into the radio.

• Connect the factory

male

factory connector into the

female

plug from the

AX-VW93-CAM

.

• Connect the

AX-VW93-CAM harness

into the AX-VW93-CAM interface.

• Test for correct operation.

Connections to be made

• Connect the Blackwire to chassis ground.

• Connect the Redwire to accessory power.

• Connect the Greenwire to reverse power (switched).

• Connect the YellowRCA jack to the aftermarket backup camera.

Installing the Interface

• Remove the main connector from the radio, then connect the

male

plug

from the

AX-VW93-CAM

into the radio.

• Connect the factory

male

factory connector into the

female

plug from the

AX-VW93-CAM

.

• Connect the

AX-VW93-CAM harness

into the AX-VW93-CAM interface.

• Test for correct operation.

• Allows a camera to be added to the factory radio

• Plug-and-play, no cutting of wires required

• Designed for NTSC cameras

• Auto switch in reverse gear

• Allows a camera to be added to the factory radio

• Plug-and-play, no cutting of wires required

• Designed for NTSC cameras

• Auto switch in reverse gear

INTERFACE FEATURESINTERFACE FEATURES

* For vehicles with Composition Media (MIB), Discovery Pro (MIB), Composition

Media (MIB STD2), Discover Media (MIB STD2).

* Vehicle must have an OPS (Optical Parking Sensor) head unit.

* Not compatible with: 3Q0035820A, 3Q0035820, 3Q0035819A, 3Q0035819,

3Q0035812, 5G0035820A, 5G0035820, 5G0035819A, 5G0035819, 5G0035812.

* For Professional installation ONLY, requires specialist equipment and knowledge to

program vehicle on-board settings to enable camera operation.

* Camera must be activated via VCDS. Head unit must be coded.

* For vehicles with Composition Media (MIB), Discovery Pro (MIB), Composition

Media (MIB STD2), Discover Media (MIB STD2).

* Vehicle must have an OPS (Optical Parking Sensor) head unit.

* Not compatible with: 3Q0035820A, 3Q0035820, 3Q0035819A, 3Q0035819,

3Q0035812, 5G0035820A, 5G0035820, 5G0035819A, 5G0035819, 5G0035812.

* For Professional installation ONLY, requires specialist equipment and knowledge to

program vehicle on-board settings to enable camera operation.

* Camera must be activated via VCDS. Head unit must be coded.

Produktspezifikationen