Axxess AXRC-GMLN10 Bedienungsanleitung

Lies die bedienungsanleitung für Axxess AXRC-GMLN10 (8 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 8 Bewertungen. Hast du eine Frage zu Axxess AXRC-GMLN10 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

AXRC-GMLN10

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/10/22 INSTAXRC-GMLN10

Product Info

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections are secure before

cycling the ignition to test this product.

NOTE: Refer to the instructions included with

the aftermarket radio.

OPTIONAL ACCESSORIES (sold separately)

Extension Harness: AXEXH-GM10

TABLE OF CONTENTS

Connections ............................................................2

Installation .............................................................3

Programming .........................................................3

APPLICATIONS

INTERFACE COMPONENTS

• AXRC-GMLN10 interface

• AXRC-GMLN10 harness

(1) With RPO code I0B • (2) With RPO code I0A

The IOA/IOB codes, if applicable, are in the Service Parts Identification labels in the following locations: Rear Compartment Floor: Malibu

Glovebox: Canyon/Colorado/Cruze/Equinox/Silverado/Sierra Note: RPO (QR codes) are in the driver door jam or “B Pillar” on the VIN label.

GM Data Interface2016-2019

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip-ties

CHEVROLET

Colorado (1) 2017-2019

Cruze (2) 2016-2019

Cruze Hatchback (2) 2016-2019

Equinox (1) 2018

Malibu (2) 2016-2019

Silverado (1) 2016-2018

Silverado LD (1) 2019

Trax (2) 2017-2020

GMC

Acadia (1) 2017-2019

Canyon (1) 2017-2019

Sierra (1) 2016-2018

Sierra Limited (1) 2019

Visit AxxessInterfaces.com for vehicle specific applications.

INTERFACE FEATURES

• Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (retained accessory power)

•

Provides illumination, parking brake, reverse, and speed sense outputs

• Used in non-amplified models, or when bypassing a factory amp

• Used in models without OnStar

• Retains all warning chimes

• High level speaker input

• Retains balance and fade

• Retains factory backup camera

• USB Micro-B updatable

Produktspezifikationen