Axxess AXTC-LN31 Bedienungsanleitung

Lies die bedienungsanleitung für Axxess AXTC-LN31 (11 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 8 Bewertungen. Hast du eine Frage zu Axxess AXTC-LN31 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

AXTC-LN31

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 8/15/25 INSTAXTC-LN31

Visit AxxessInterfaces.com for more detailed information

about the product and up-to-date vehicle specific applications

ATTENTION:

With the key out of the ignition,

disconnect the negative battery terminal before

installing this product. Ensure that all installation

connections, especially the air bag indicator lights, are

plugged in before reconnecting the battery or cycling

the ignition to test this product.

NOTE:

Refer also to the instructions included with the

aftermarket accessory before installing this device.

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Connections ............................................................2

Programming .........................................................3

Troubleshooting.....................................................4

Data Interface with SWC

Fits Select GMC Models2017-2023

APPLICATIONS

• AXTC-LN31 interface

• AXTC-LN31 harness

• 3.5mm adapter

* For extension, use AXEXH-GM31

Note: The radio code can be found in the Service Parts Identification Label

located: Glove box – Equinox/Terrain

10R only (see note) - Camaro/Canyon/Colorado/Malibu/Sierra/Silverado

Note: Newer model GM vehicles are transitioning to a QR style label.

If the Service Parts Identification Label is not located where listed, reference the

Vehicle Certification Label on the inside of the driver’s door opening for the QR code.

Chevrolet

Camaro (IOR)* ...........2019-2023

Cheyenne (IOR)* ........2019-2021

Colorado (IOR) ...........2019-2022

Equinox (IOR)* ..........2019-2023

Malibu (IOR)* .............2019-2022

Silverado (IOR)* .........2019-2021

Sonic ..........................2019-2020

Spark (IOR) ................2019-2022

Chevrolet (Cont)

Trax ...........................2021-2022

Trax (IOR) ..................2017-2020

GMC

Acadia (IOR) ..............2020-2022

Canyon (IOR) .............2019-2022

Sierra (IOR)* ...............2019-2021

Terrain (IOR)* ............2019-2022

•

Designed for non-amplified models, or when bypassing a factory amplifier

• Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (Retained Accessory Power)

• Provides NAV outputs (parking brake, reverse, and speed sense)

• Built-in features like SWC & Auto-Detect

• Auto-detect feature - automatically detects the vehicle type, radio

connection, and preset controls

• Ability to dual assign steering wheel control buttons

• Designed to work with a major radio brands

• Can be manually programmed for most vehicles

• Retains settings, even after battery disconnection

• Retains warning chimes through onboard speaker

• Retains factory backup camera if equipped

• Retains balance & fade

• Micro “B” USB updatable

Produktspezifikationen