Axxess AXTC-VW2 Bedienungsanleitung

Lies die bedienungsanleitung für Axxess AXTC-VW2 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 4 Bewertungen. Hast du eine Frage zu Axxess AXTC-VW2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

AXTC-VW2

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 8/27/25 INSTAXTC-VW2

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Connections ............................................................2

Programming .........................................................3

Troubleshooting.....................................................4

Data Interface with SWC

Fits Select Volkswagen Models 2015-2019

APPLICATIONS

• Designed for non-amplified systems

• Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (Retained Accessory Power)

• Provides NAV outputs (parking brake, reverse, and speed sense)

• Built-in features like SWC & Auto-Detect

• Auto-detect feature - automatically detects the vehicle type, radio

connection, and preset controls

• Ability to dual assign steering wheel control buttons

• Designed to work with a major radio brands

• Can be manually programmed for most vehicles

• Retains settings, even after battery disconnection

• Retains the factory backup camera if equipped

• Provides 12-volt illumination output

• Micro “B” USB updatable

Volkswagen

Beetle ................................................2016-2019

Golf Series .........................................2015-2016

Jetta ..................................................2016-2019

Passat................................................2016-2018

Tiguan ...............................................2016-2017

• AXTC-VW2 interface

• AXTC-VW2 harness

• 3.5mm adapter

Product Info

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections, especially the air

bag indicator lights, are plugged in before

reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included

with the aftermarket accessory before

installing this device.

Produktspezifikationen