Bauhn APVK-1224 Bedienungsanleitung

Lies die bedienungsanleitung für Bauhn APVK-1224 (2 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu Bauhn APVK-1224 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Control and Buttons

Have you got everything?

A. Switch between phone/camera mode

B. USB-C charging port

C. Button: increase brightness

D. Charging LED Indicator

E. Button: decrease brightness

F. On/Off Switch: slide to switch the LED

video light unit on/off

Condenser

Microphone

LED Video Light

Bluetooth

®

Remote

A. Foldable Tripod

B. Condenser Microphone

C. LED Video Light

D. Bluetooth

®

Remote

E. AAA Activ Energy Battery

F. Phone Holder

G. USB-C Charging Cable

H. User Guide

I. Warranty Certicate

User Guide

Model: APVK-1224

Portable Phone Vlogging Kit

ABCDEFGHIJKL

G. Mode Button: change brightness setting

H. Power LED Indicator

I. Power Button: press to turn the light on/off

J. LED Light Indicator

K. Capture Button

L. On/Off Switch: slide to turn the remote on/off

Operation

Setting Up

• Set up the tripod to the desired height using the

adjustment locks.

• Screw the phone holder onto the tripod as illustrated,

ensuring it is securely screwed in.

• Extend the phone holder and slide your phone in. The

phone holder will automatically lock and hold you phone

in place.

• Slide the condenser microphone into the LED video light

to securely lock it in place.

• Once the condenser microphone and LED video light are

connected, slide it onto the phone holder as illustrated,

ensuring it is securely locked in.

• Use the handle on the tripod to adjust the angle of your

photo/video.

Using The Condenser Microphone

• Connect the condenser microphones 3.5mm audio cable

to your phones earphone port.

• Slide to switch up for phone mode. Slide the switch down

for camera mode (you camera must support the 3.5mm

MIC input.

• Note: you will need to buy a lighting to 3.5mm adaptor for

iOS smart phones that do not have an earphone port.

Using The LED Video Light

• Slide the On/Off switch to On to turn the LED video light

unit on. The power LED indicator will light up blue.

• Press the Power button to turn the light on/off. The power

LED indicator will turn off once the video light is on. Press

again to turn off the light and the power LED indicator will

light up blue again.

• Use the / buttons to adjust the brightness level.

• Press the Mode button to change brightness settings.

• Slide the On/Off switch to Off to turn the LED video light

unit off. The power LED indicator will also turn off.

Using The Remote

• Slide the On/Off switch to turn the remote on until the LED

indicator starts ashing.

• Turn on your phones Bluetooth

®

and select “SeleCom” from

the list of found devices. Once connected, the LED indicator

will stop ashing. (The remote will automatically turn off after 5

minutes if not paired).

• Press the capture button to remotely take a picture.

• Slide the On/Off switch again to turn the remote off.

Charging

•LED Video Light: Connect the supplied USB-C charging cable to

the USB-C port on the LED video light. The charging LED indicator

will light up red. Once fully charged, the charging LED indicator will

light up green.

•Remote: Connect the supplied USB-C charging cable to the USB-C

port on the remote. The charging LED indicator will light up red.

Once fully charged, the charging LED indicator will turn off.

A

B

C

D

E

F

G

I

H

Produktspezifikationen