Bauknecht BK4PC11BS7A0 Bedienungsanleitung
Seiten 8 Spülmaschine
Lies die Bedienungsanleitung für Bauknecht BK4PC11BS7A0 kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 52 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage
ENQuick Guide
1
THANK YOU FOR BUYING A BAUKNECHT PRODUCT.
In order to receive a more complete assistance, please
register your appliance on:www.bauknecht.eu/register
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine’s functional components.
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher and must be
lled when the SALT REFILL indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Only the rst time you do this: ll the salt reservoir
with water.
3. Position the funnel and ll the salt reservoir (see gure)
right up to its edge (approximately 1 kg); it is not unu-
sual for a little water to leak out.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Whenever you need to add salt, it is mandatory to complete the pro-
cedure before the beginning of the washing cycle to avoid corrosion.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently prevent-
ing scale buildup on heater, contributing also to better cleaning eciency.
This system regenerates itself with salt, therefore it is required to rell
salt container when empty.
Frequency of regeneration depends on water hardness level setting - regen-
eration takes place once per Eco cycles with water hardness level set to . 63
Regeneration process starts in nal rinse and nishes in drying phase, be-
fore cycle ends.
• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
A
C
D
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid
dispenser A should be lled when the RINSE AID
REFILL indicator light in the control panel is lit.
NEVER pour the rinse aid directly into the appli-
ance tub.
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device . Introduce the C
detergent into the dry dispenser only. Place the amount of detergent for D
pre-washing directly inside the tub. If all-in-one detergents are used, we
recommend using the TABLETbutton, because it adjusts the program so
that the best washing and drying results are always achieved.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
Program
Programs description
Drying
phase
ActiveDry
Available
options
*)
Duration
of wash
program
(h:min)
**)
Water
con-
sumption
(litres/
cycle)
Energy
consump-
tion
(kWh/cycle)
1.
Eco50°- Program is suitable to clean normally soiled tableware, that for
this use, it is the most ecient programme in terms of its combined ener-
gy and water consumption, and that it is used to assess compliance with
the EU Ecodesign legislation.
3:358.70.63
2.
Intensive65°- Program recommended for heavily soiled crockery, espe-
cially suitable for pans and saucepans.
2:4517.51.60
3.
Sensor50-60°- For normally soiled dishes with dried food residues. Senses
the level of soiling on the dishes and adjusts the program accordingly.
1:20 - 3:007.0 - 14.00.70 - 1.10
4.
Fast Wash&Dry 50°
- Normally soiled crockery. Everyday cycle, that ensures
optimal cleaning and drying performance in shorter time.
1.2511.51.10
5.
Glass- 45° Program for delicate items, which are more sensitive to high
temperatures, for example glasses and cups.
1:4012.01.20
6.
Rapid 30’- 45° Program to be used for half load of lightly-soiled dishes
with no dried food residues. Without drying.
-
0:309.00.50
7.
Silent
50° - Suitable for night-time operation of the appliance. With the
lowest noise.
3:3016.01.15
8.
Hygiene- 65° Normally or heavily soiled crockery, with additional anti-
bacterial wash. Can be used to perform maintenance of the dishwasher.
-
1.5012.01.30
9.
Prewash- Use to refresh crockery planned to be washed later.
No detergent to be used with this program.
--
0:104.50.01
CONTROL PANEL
FIRST TIME USE
More information in the Daily Reference Guide on website.
PROGRAMS TABLE
PLEASE SCAN THE
QR CODE ON YOUR
APPLIANCE IN
ORDER TO HAVE
MORE DETAILED
INFORMATION
Before using the appliance carefully read Safety and Installation Instructions.
After installation, please remember to remove all transport protection parts from
the dishwasher.
1. On-O / Reset button with indicator light
2. Program selection button with indicator light
3. Multizone button with indicator light / Keylock
4. Eco program indicator light
5. Keylock indicator light
6. Display
7. Program number and remaining time indicator
8. Tablet (Tab) indicator light
9. Closed water tap indicator light
10. Rinse Aid rell indicator light
11. Salt rell indicator light
12. Extra Dry button with indicator light / Tablet (Tab)
13. Delay button with indicator light
14. Start/Pause button with indicator light / Drain out
3
1
2
8
13
1454671112910
Fehlercodes Bauknecht BK4PC11BS7A0
Fehlercodes aus der offiziellen Bedienungsanleitung, mit Bedeutung und Lösung.
| Code | Bedeutung | Lösung | Seite |
|---|---|---|---|
| F15 | Der Geschirrspüler beendet frühzeitig das Programm. Die LEDs Ein-Aus und START/Pause blinken rasch. Mögliche Ursachen: zu niedrig positionierter Abflussschlauch, vom Abwassersystem angesaugtes Wasser oder Luft in der Wasserversorgung. | Kontrollieren, ob das Ende des Abflussschlauches auf der korrekten Höhe positioniert ist (siehe INSTALLATION). Kontrollieren, ob Wasser in das Abwassersystem angesaugt wird, und gegebenenfalls ein Belüftungsventil installieren. Die Wasserversorgung auf Lecks oder andere Probleme kontrollieren, die einen Lufteintritt verursachen. | 6 |
| F6 | Der Geschirrspüler lädt kein Wasser. Die LEDs Ein-Aus und START/Pause blinken rasch. Mögliche Ursachen: kein Wasser im Wassernetz, zugedrehter Wasserhahn, geknickter Zulaufschlauch oder verstopftes Sieb im Zulaufschlauch. | Sicherstellen, dass Wasser im Wassernetz ist oder der Wasserhahn läuft. Sicherstellen, dass der Zulaufschlauch nicht geknickt ist (siehe INSTALLATION), den Geschirrspüler neu programmieren und wieder einschalten. Das Sieb im Zulaufschlauch überprüfen und reinigen, danach den Geschirrspüler ausschalten und ein neues Programm starten. | 6 |
Alle Fehlercodes Bauknecht Spülmaschine
Produktspezifikationen
| Marke: | Bauknecht |
| Kategorie: | Spülmaschine |
| Modell: | BK4PC11BS7A0 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Bauknecht BK4PC11BS7A0 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten