Bauknecht BK41C11BS7LA0 Bedienungsanleitung

Lies die bedienungsanleitung für Bauknecht BK41C11BS7LA0 (8 Seiten) kostenlos online; sie gehört zur Kategorie Spülmaschine. Dieses Handbuch wurde von 52 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 26.5 Bewertungen. Hast du eine Frage zu Bauknecht BK41C11BS7LA0 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

ENQuick Guide

1. ON-OFF/Reset button with indicator light

2. Program selection button

3. Salt rell indicator light

4. Rinse Aid rell indicator light

5. Program number and delay time indicator

6. Tablet indicator light

PLEASE SCAN THE

QR CODE ON YOUR

APPLIANCE IN

ORDER TO HAVE

MORE DETAILED

INFORMATION

Before using the appliance carefully read Safety and Installation Instructions.

After installation, please remember to remove all transport protection parts from

the dishwasher.

Program

Programs description

Drying

phase

ActiveDry

Available

options

*)

Duration

of wash

program

(h:min)

**)

Water

consumption

(litres/cycle)

Energy

consumption

(kWh/cycle)

1.

Eco50°- Program is suitable to clean normally soiled tableware, that for

this use, it is the most ecient programme in terms of its combined en-

ergy and water consumption, and that it is used to assess compliance

with the EU Ecodesign legislation.

3:358.70.63

2.

Intensive65°- Program recommended for heavily soiled crockery, es-

pecially suitable for pans and saucepans.

2:4517.51.60

3.

Sensor50-60°- For normally soiled dishes with dried food residues.

Senses the level of soiling on the dishes and adjusts the program ac-

cordingly.

1:20 - 3:007.0 - 14.00.70 - 1.10

4.

Fast Wash&Dry50° - Normally soiled crockery. Everyday cycle, that en-

sures optimal cleaning and drying performance in shorter time.

1.2511.51.10

5.

Half Load55° - Ideal for washing a half load of lightly or normally soiled

crockery.

1:2011.01.00

6.

Rapid 30’- 45° Program to be used for half load of lightly-soiled dishes

with no dried food residues. Without drying.

-

0:309.00.50

7.

Silent50° - Suitable for night-time operation of the appliance. With the

lowest noise.

3:3016.01.15

8.

Sanitizing- 65° Normally or heavily soiled crockery, with additional

antibacterial wash. Can be used to perform maintenance of the dish-

washer.

-

1.5012.01.30

9.

Prewash - Use to refresh crockery planned to be washed later.

No detergent to be used with this program.

--

0:104.50.01

1234567891011

7. Display

8. Multizone indicator light

9. Multizone

button

10. Delay button

11. START/Pause button with

indicator light / Tablet (Tab)

CONTROL PANEL

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on

the machine’s functional components.

• It is mandatory that the salt reservoir never be empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be

lled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap

(anticlockwise).

2. Only the rst time you do this: ll the salt reservoir

with water.

3. Position the funnel and ll the salt reservoir (see gure)

right up to its edge (approximately 1 kg); it is not unu-

sual for a little water to leak out.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into

the container during the wash program (this could damage the water sof-

tener beyond repair).

Whenever you need to add salt, it is mandatory to complete the pro-

cedure before the beginning of the washing cycle to avoid corrosion.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently prevent-

ing scale buildup on heater, contributing also to better cleaning eciency.

This system regenerates itself with salt, therefore it is required to rell

salt container when empty.

Frequency of regeneration depends on water hardness level setting - regen-

eration takes place once per Eco cycles with water hardness level set to . 63

Regeneration process starts in nal rinse and nishes in drying phase, be-

fore cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

A

C

D

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid

dispenser A should be lled when the RINSE AID

REFILL indicator light in the control panel is lit.

NEVER pour the rinse aid directly into the appli-

ance tub.

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device . Introduce the C

detergent into the dry dispenser only. Place the amount of detergent for D

pre-washing directly inside the tub. If all-in-one detergents are used, we

recommend using the TABLETbutton, because it adjusts the program so

that the best washing and drying results are always achieved.

Usage of detergent not designed for dishwashers may cause malfunc-

tion or damage to the appliance.

FIRST TIME USE

More information in the Daily Reference Guide on website.

PROGRAMS TABLE

THANK YOU FOR BUYING A BAUKNECHT PRODUCT.

In order to receive a more complete assistance, please

register your appliance on:www.bauknecht.eu/register

Produktspezifikationen