Best Buy BE-ANT600HA Bedienungsanleitung
Best Buy
TV-Antenne
BE-ANT600HA
Lies die bedienungsanleitung für Best Buy BE-ANT600HA (2 Seiten) kostenlos online; sie gehört zur Kategorie TV-Antenne. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu Best Buy BE-ANT600HA oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
Package contents
• Antenna
• Plastic antenna base
• Power adapter
• Power inserter
• Double-sided tape
• Fixing pins (2)
• Quick Setup Guide
Features
• 50 miles (80 km) range* for reception in most locations
• Advanced amplier design boosts performance while minimizing noise
and interference for the very best picture
• Wall-mounted or free-standing design with included tabletop base for
more placement options
• Ultra-exible 8 ft. (2.4 m) coaxial cable that’s built-in for easy routing
• Black/white two-sided antenna blends into your home decor
*Range will vary depending on a variety of environmental and geographic factors
Setting up and using your antenna
1 Select a location to place your antenna. See “Tips for Better Reception”
for more information.
Notes:
• This is an indoor antenna. Do not place it outside.
• When placing the antenna in the stand or on a wall/window, you can orient
the antenna in either direction.
2 Attach double-sided tape to your antenna’s four corners, then rmly
press the antenna to the wall or window to secure.
: Do not secure your antenna with Note
the double-sided tape until you’re sure
it’s in the correct location to receive the
channels you want.
OR
Use two xing pins (included) to attach your antenna to a wall. Use a
hammer and nail to create two small nail holes, then rmly press the
xing pins through the antenna and into the holes.
: The xing pins are suggested for use on a wooden wall or any other softer Note
walls.
OR
Pass the coaxial cable through the plastic antenna base holes ( ). Then A
rmly push the antenna down into the plastic antenna base ( ).B
3 Connect the power inserter’s coaxial connection to the coaxial jack on
your TV, digital converter box, or set-top box.
Connecting the antenna to a digital
converter or set-top box
• Connect the coaxial cable to your digital converter box or set-top box,
then connect a video/audio cable (such as an HDMI, coaxial, or AV
cable) from your converter box or set-top box to your TV.
Before using your new product, please read these instructions to prevent any damage.
Thin Film
Indoor Antenna
Quick Setup Guide
BE-ANT600HA
Double-sided tape
Stand
Coaxial cable
Front
Back
Coaxial cable
Power inserter
Power adapter
Antenna
Digital converter
or set-top box
TV
HDMI cable
AV cable
OR OR
Coaxial cable
To TV
To antenna
Connecting the antenna directly to your TV
• Connect the coaxial cable to the coaxial jack on the back of your TV.
: If you have an HDTV with a digital TV (ATSC) tuner, you can connect the Note
antenna directly to the HDTV. Older TVs may require a separate digital TV
tuner or digital converter box.
1 Plug the power adapter into a wall outlet, then plug the other end into
the power inserter.
: Use only the supplied power adapter. For the antenna to function Note
correctly, the power inserter must be installed and powered on.
2 Turn on your TV, then press input or source to select the input your
antenna is connected to.
: Turn on your digital converter box or set-top box if your antenna is Note
connected to either device.
3 Open your TV’s setup menu, then select the “scan” or “channel scan”
option. Your TV automatically searches for available channels in your
area. See your TV’s user guide for detailed instructions.
: If you don’t receive channels that you want, try moving your antenna to Note
another location, then run the channel scan again.
TV
Coaxial cable
Power inserter
Power adapter
Antenna
To TV
To antenna
Fixing pins
V1 ENGLISH 22-0387
Tips for better reception
• Install the antenna as high as possible to avoid possible obstacles
between the antenna and the transmission tower.
• If possible, place the antenna near windows.
• Keep the antenna away from sources of interference such as air
conditioners, hair dryers, and microwave ovens.
• Run a channel scan (from your TV’s setup menu) every time you move
your antenna.
• If possible, position your antenna toward the transmission tower. To
determine which channels are available in your area, visit
https://www.fcc.gov/media/engineering/dtvmaps. Type in your zip
code to get help with antenna placement.
• Test the antenna in multiple locations to nd the strongest signal.
• This antenna is an indoor antenna. Do not place it outside.
• Run a channel scan monthly to make sure that you are receiving all
possible channels.
• Some TVs have a signal strength indicator that can help with antenna
placement. Check your TV manual to see if your TV has this feature.
• This antenna works with any TV or device with an ATSC tuner. See your
device’s manual to check compatibility.
• Make sure that the signal strength from the antenna is adequate. Some
TVs have a signal strength indicator. See your TV manual to see if your TV
has this feature.
I have more than one TV on which I want to view over-the-air TV.
• If the signal is strong enough, you can purchase a coaxial splitter to allow
for one antenna to provide channels to more than one TV.
OR
• You will need to purchase an antenna for each TV that you would like to
view over-the-air TV.
I am not receiving cable and streaming channels after a channel scan.
• Your antenna is capable of receiving local channels that are dependent
on the broadcasters in your area.
• You can use the antenna alongside cable boxes and streaming devices,
but it will not provide all of the same content oered by those devices.
I want HD channels, but I do not have an HDTV.
• Your digital antenna will not upscale to HD if the TV is not HD. You will
need to purchase an HDTV.
Specications
• Dimensions (H×W×D): 11.7 × 8.3 × 0.5 in. (29.8 × 21 × 1.3 cm)
• Range: 50 miles (80 km)
Note: Range will vary depending on a wide range of environmental and
geographic factors
• Frequency range:
• VHF: 174~230 MHz
• UHF: 470~700 MHz
• Cable length: 8 ft. (2.4 m)
• Impedance: 75
Legal notices
FCC Statement
1. FCC Caution - §15.21:
Changes or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
2. FCC Statement - §15.105(b):
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Troubleshooting
I cannot nd any channels.
• Make sure that you have selected the correct input on your TV.
• Make sure that all your connections are correct and secure.
• Move your antenna, then rescan for available channels on your TV or
set-top box.
• Make sure that you are connected to a TV or set-top box with an ATSC
tuner. If you do not have either of those, you will need to purchase a
digital converter box.
The picture quality is good on some channels and poor or no
reception on others.
• Move your antenna, then scan for available channels on your TV or
set-top box.
• Keep the antenna away from sources of interference, such as air
conditioners, hair dryers, and microwave ovens.
• Your antenna may be too far from the broadcast antenna to receive an
adequate signal. The signal may also be aected by obstructions
between the broadcast antenna and your antenna.
• Make sure that the signal strength from the antenna is adequate. Some
TVs have a signal strength indicator. Check your TV manual to see if your
TV has this feature.
I don’t know what digital TV reception I get in my area.
• To determine which channels are available in your area, visit
https://www.fcc.gov/media/engineering/dtvmaps. Type in your zip
code to get help with antenna placement.
Not all channels are available after performing a channel scan.
• Adjust your antenna, then scan for available channels on your TV or
set-top box.
One-year limited warranty
Visit www.bestbuy.com/bestbuyessentials for details.
Contact Best Buy essentials
For customer service, call 866-597-8427 (U.S. and Canada)
www.bestbuy.com/bestbuyessentials
Best Buy essentials is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2022 Best Buy. All rights reserved.
Produktspezifikationen
| Marke: | Best Buy |
| Kategorie: | TV-Antenne |
| Modell: | BE-ANT600HA |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Best Buy BE-ANT600HA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung TV-Antenne Best Buy
29 August 2025
29 August 2025
29 August 2025
Bedienungsanleitung TV-Antenne
- RF Elements
- Terk
- Monster
- Schwaiger
- Megasat
- Wilson Electronics
- Imperial
- Thomson
- RCA
- Poynting
- Kathrein
- Clarion
- Hawking Technologies
- Shure
- Sencor
Neueste Bedienungsanleitung für -Kategorien-
29 August 2025
28 August 2025
25 August 2025
14 August 2025
13 August 2025
13 August 2025
9 August 2025
1 August 2025
24 Juli 2025
24 Juli 2025