Blackburn Helmet Mirror Bedienungsanleitung


Lies die bedienungsanleitung für Blackburn Helmet Mirror (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 2 Bewertungen. Hast du eine Frage zu Blackburn Helmet Mirror oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
Visit us at blackburndesign.com for product updates.
Self-adhesive discs
Set screw
Arm
Mirror
Pivot
Mirror base
STEP ONE: Carefully position and press
adhesive disc into place on the back of
STEP TWO: With helmet on your head,
position the mirror on the left side of your
helmet. Choose a relatively flat section.
Once you have the reflection required, remove
adhesive backing and press mirror firmly in place.
FOR ADJUSTMENT: A set screw inside the pivot enables the arm to
keep the mirror in your selected position. It may become necessary to
tighten this screw with a 3mm allen wrench. Simply snap the pivot off
the mirror base and tighten from the inside. Be careful to not
overtighten as it may strip the threads inside the pivot.
WARNING: Objects in the mirror are closer than they appear.
HELMET MIRROR
Small, Light and Fully Adjustable
Part# 2020203
5550 Scotts Valley Drive, Scotts Valley, Ca 95066
Customer Service: 1-800-456-2355
Blackburndesign.com
Printed in China


Produktspezifikationen

Marke: Blackburn
Kategorie: Nicht kategorisiert
Modell: Helmet Mirror

Brauchst du Hilfe?

Wenn Sie Hilfe mit Blackburn Helmet Mirror benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten