Blizzard Laser Blade G Bedienungsanleitung
Blizzard
Effektmaschine
Laser Blade G
Lies die bedienungsanleitung für Blizzard Laser Blade G (16 Seiten) kostenlos online; sie gehört zur Kategorie Effektmaschine. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 15 Bewertungen. Hast du eine Frage zu Blizzard Laser Blade G oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/16
Blizzard Lighting, LLC
http://www.blizzardpro.com
Waukesha, WI USA
Copyright (c) 2020
Page 2
Laser Blade™ G Manual - Rev. B © 2020 Blizzard Lighting, LLC
TABLE OF CONTENTS
1. Getting Started 3
What’s In The Box? 3
Getting It Out Of the Box 3
Powering Up! 3
Getting A Hold Of Us 3
Laser Safety Instructions 4
2. Meet the Laser Blade™ G 5
Additional Features 5
DMX Quick Reference 5
Laser Blade™ G Pin-Up Picture 6
The Rear Connections 6
3. Setup 7
Fuse Replacement 7
Connecting A Bunch of Laser Blade™ G Fixtures 7
Data/DMX Cabling 7
Cable Connectors 8
3-Pin??? 5-Pin??? Huh?!? 8
Take It To The Next Level: Setting Up DMX Control 8
Fixture Linking (M/S Mode) 9
Mounting & Rigging 9
4. Operating Adjustments 10
The Control Panel 10
Control Panel Menu Structure 11
DMX Mode 11
Set the Starting DMX Address 11
Run Mode 11
Slave Mode 11
Mirror Symmetry Mode 11
Running Mode Settings 11
Graphic Mode Settings 11
Speed Settings 11
5. Appendix 14
Keeping Your Laser Blade™ G As Good As New 14
Returns (Gasp!) 14
Shipping Issues 14
Tech Specs! 15
Page 3
Laser Blade™ G Manual - Rev. B © 2020 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x Laser Blade™ G
• 1 x Ever-So-Handy Power Cord
• This Lovely User Manual
Getting It Out Of the Box
Congratulations on purchasing Laser Blade™ G, the totally stellar green laser
light xture. Now that you’ve got Laser Blade™ G, you should carefully unpack
the box and check the contents to ensure that all parts are present and in
good condition. If anything looks as if it has been damaged in transit, notify
the shipper immediately and keep the packing material for inspection. Again,
please save the carton and all packing materials. If a xture must be returned
to the factory, it is important that the xture be returned in the original factory
box and packing.
Powering Up!
All xtures must be powered directly o a switched circuit and cannot be run
o a rheostat (variable resistor) or dimmer circuit, even if the rheostat
or dimmer channel is used solely for a 0% to 100% switch.
Warning! All xtures must be connected to circuits with a suitable
Ground (Earthing).
Getting A Hold Of Us
If something happens goes wrong, please visit www.blizzardpro.com/
support and open a support ticket. We’ll be happy to help, honest.
Disclaimer: The information and specications contained in this document are
subject to change without notice. Blizzard Lighting™ assumes no responsibility
or liability for any errors or omissions that may appear in this user manual.
Blizzard Lighting™ reserves the right to update the existing document or to
create a new document to correct any errors or omissions at any time. You can
download the latest version of this document from www.blizzardpro.com.
Author: Date: Last Edited: Date:
J. Thomas 11/16/2015 J. Thomas 11/4/2020
Produktspezifikationen
| Marke: | Blizzard |
| Kategorie: | Effektmaschine |
| Modell: | Laser Blade G |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Blizzard Laser Blade G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Effektmaschine Blizzard
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
Bedienungsanleitung Effektmaschine
- Laserworld
- NGS
- Valueline
- Chauvet
- Fun Generation
- Martin
- The Confetti Maker
- Lab Gruppen
- Cameo
- ColorKey
- Drawmer
- Rosco
- Doepfer
- Klark Teknik
- Lexicon
Neueste Bedienungsanleitung für -Kategorien-
10 Oktober 2024
8 Oktober 2024
6 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
28 September 2024
25 September 2024