Blustream MFP112 Bedienungsanleitung

Blustream Router MFP112

Lies die bedienungsanleitung für Blustream MFP112 (11 Seiten) kostenlos online; sie gehört zur Kategorie Router. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 13 Bewertungen. Hast du eine Frage zu Blustream MFP112 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/11

MFP112

User Manual

11 Input Multi-Format Presentation Switch

Matrix

Switcher

MFP112 USER MANUAL

02 www.blustream.co.uk

Features 03

Panel Descriptions 04/05

MFP112 Control Ports 06

Remote Control Descriptions 07

HDBaseT Receiver Options 08

HDBaseT Transmitter Options 09

Terminating HDBaseT CAT Cable 10

Understanding HDBaseT Status Lights 10

IR Distribution 11

Switcher Front Panel Display 12

Adjusting The Video Output Resolution 13

EDID Configuration 14

Application Diagram 15

Specifications 16

Package Contents 16

Maintenance 16

RS-232 Commands 17/18

Infrared Commands 19/20

Contents

Thank you for purchasing

this product.

For optimum performance and safety,

please read these instructions care-

fully before connecting, operating or

adjusting this product. Please keep this

manual for future reference.

Surge protection device

recommended

This product contains sensitive electri-

cal components that may be damaged

by electrical spikes, surges, electric

shock, lightning strikes, etc. Use of

surge protection systems is highly

recommended in order to protect and

extend the life of your equipment.

Safety And

Performance Notice

The transmission distances of HDMI

over UTP cables are measured using TE

CONNECTIVITY 1427071-6

EIA/TIA-568-B termination (T568B) of

cables is recommended for optimal

performance.

To minimize interference of the un-

shielded twisted pairs in the CAT5e/6

cable do not run the HDBaseT /

Cat5e/6/6a cabling with or in close par-

allel proximity to mains power cables.

Do not substitute or use any other

power supply other than the enclosed

unit, or a Blustream approved replace-

ment.

Do not disassemble Blustream hard-

ware for any reason. Doing so will void

the manufacturer’s warranty.

MFP112 USER MANUAL

04 www.blustream.co.uk

12 13 14 16 18 19 20

1 LCD display - Shows the status of

input-output selection, EDID info etc.

2 IR receiver window.

3 Matrix Switcher LED indicator -

When the LED is lit, Matrix Switcher

mode is active and both HDMI

outputs switch independ ntly. e

When the LED is not lit the Matrix

switcher is in mode and Splitter

both HDMI outputs will display the

same selected video input.

4 Mode button - Press to switch

between and Matrix Switcher

Splitter modes.

5 HDBaseT input selection button

for HDMI output 1 when in Matrix

Switcher mode.

6 HDMI input selection buttons for

HDMI output 1 when in Matrix

Switcher mode.

7 Format set button - Press to change

the output resolution.

8 Menu button - Press to enter EDID

set mode, volume setting or F/W

information.

9 Up selection button - Press to

change segment’s value.

q Down selection button - Press to

change segment’s value.

w Enter button - Press to confirm the

settings.

e Power LED indicator - Indicate the

status of power.

r Embed LED indicator - When the

LED is lit, mode Audio embed

is active. When active the L/R

Analogue input will be embedded

onto the HDMI/HDBaseT outputs.

In mode analogue audio Splitter

is embedded to both of the HDMI/

HDBaseT outputs with the ability

to adjust the volume. In Matrix

Switcher mode Analogue audio

will only be embedded onto

HDBaseT output 2.

t L/R in selection button - Press to

embed the Analogue L/R audio

input to the HDMI/HDBaseT

outputs (as above).

y HDBaseT input selection button -

Press to select the HDBaseT input

switched to output 2 in Matrix

Switcher mode, or both HDMI/

HDBaseT outputs in mode.Splitter

u HDMI input selection buttons 1 to

4 - Press to select the HDMI input

switched to output 2 in Matrix

Switcher mode, or both HDMI/

HDBaseT outputs in mode.Splitter

i VGA input selection buttons 1 to 4

- Press to select the VGA input with

associated Analogue L/R audio

switched to output 2 in Matrix

Switcher mode, or both HDMI/

HDBaseT outputs in mode.Splitter

o YPbPr (Component video) input

selection button - Press to select

the YPbPr input with associated

Analogue L/R audio input.

p AV input selection button - Press

to select the Composite video AV

input with associated Analogue L/R

audio input.

a ESC-Press to exit the menu.

Front Panel

1 2 3 4 7 8 9 106

Notes:

• Volume can be changed using IR, TCP/IP & RS-232 control or from the front panel UP and DOWN buttons when in the volume

menu.

5 11

15 17

11 Input Multi-Format Presentation Switch

Matrix

Switcher

Produktspezifikationen

Marke:	Blustream
Kategorie:	Router
Modell:	MFP112
Display-Typ:	LED
Breite:	438 mm
Tiefe:	225 mm
Mitgelieferte Kabel:	RS-232
Produktfarbe:	Schwarz
Höhe:	45 mm
Betriebstemperatur:	0 - 40 °C
Paketgewicht:	1500 g
Zertifizierung:	FCC\nCE
Netzteil Ausgangsspannung:	12 V
AC-Adapter Ausgangssstrom:	5 A
Betriebsanleitung:	Ja
Anzahl HDMI-Anschlüsse:	5
Temperaturbereich bei Lagerung:	-20 - 60 °C
Montageset:	Ja
RS-232 port:	1
Audioeingang (L, R):	11
Composite Video-Eingang:	1
Komponenteneingang Video (YPbPr/YCbCr):	1
HDCP:	Ja
Unterstützte Video-Modi:	720p, 1080p
Unterstützte Grafik-Auflösungen:	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1360 x 768 (WXGA), 1440 x 900 (WXGA+), 1680 x 1050 (WSXGA+)
Nachhaltigkeitskonformität:	Ja
Nachhaltigkeitszertifikate:	CE, RoHS
Anzahl der HDMI-Ausgänge:	1
S/PDIF-Ausgang:	Ja
HDMI-In:	4
HDCP-Version:	1.4
VGA (D-Sub)-Eingangsanschlüsse:	4
3,5 mm (1/8-inch) in:	Ja
RJ-45-Eingangsanschlüsse:	1
RJ-45-Ausgangsanschlüsse:	1
3,5 mm (1/8-inch) out:	Ja
Dolby-Technologie:	DTS-HD, Dolby Atmos, Dolby Digital Plus, Dolby TrueHD
Erweiterte Display-Identifikationsdaten (EDID):	Ja
Analoger Audio-Ausgang:	1