Bogen Nyquist NQ-SMS1810-VF Bedienungsanleitung

Bogen Nicht kategorisiert Nyquist NQ-SMS1810-VF

Lies die bedienungsanleitung für Bogen Nyquist NQ-SMS1810-VF (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Bogen Nyquist NQ-SMS1810-VF oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
Specications are subject to change.
© Copyright 2023, Bogen Communications LLC
740-00192B 230720
NQ-SMS1810-VF Speaker
Installation Instructions
Preparation
1. Upward-ring Operation Figure 1: Use as shipped. ( )
2. Downward-ring Operation: Relocate hangers to the bottom of the assem-
bly. (Figure 2)
(Figure 3)
Figure1: 
Upward-ring operation
Figure2: 
Downward-ring operation
Figure3: 
Side-ring operation
Installation
1. Determine a structurally sound hang point for the enclosure.
2. Install to the desired height using the hanging chain.
Note: AHJ/local codes may require a secondary tie-off to the structure.
Electrical connection
1. Feed the supply cable through whip (if required) to connector.
2. Select speaker leads for desired system type: 70VRed, 25V – Yellow,
and COM – Black. Interconnect the speakers in the system, making sure
that all leads of the same color are connected. Avoid swapping colors.
3. Cut bare wire tip off of unused speaker lead. Feed connection points
through the clamp into the enclosure and tighten the clamp screws.
4. Rotate the switch to the desired power setting.
Product has been tested to UL Standard 2043.


Produktspezifikationen

Marke: Bogen
Kategorie: Nicht kategorisiert
Modell: Nyquist NQ-SMS1810-VF

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bogen Nyquist NQ-SMS1810-VF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten