Bogen Nyquist NQ-SYSCTRL Bedienungsanleitung

Bogen Nicht kategorisiert Nyquist NQ-SYSCTRL

Lies die bedienungsanleitung für Bogen Nyquist NQ-SYSCTRL (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Bogen Nyquist NQ-SYSCTRL oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
Specications are subject to change.
© Copyright 2022, Bogen Communications LLC
740-00067D 220805
NQ-SYSCTRL System Controller
Installation and Use Guide
2
NQ-SYSCTRL
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
Avertissement: pour réduire le risque dincendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et lhumidité.
tus.
Lappareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel quun vase, ne doit être placé sur
lobjet.
The mains plug is used as disconnect device. The mains plug of apparatus should not be obstructed OR should be easily accessed during
intended use. To be completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains.
La prise du secteur est utilisé pour déconnecter le système. La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son
utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.
CAUTION: DO NOT INSTALL OR PLACE THIS UNIT IN A BOOK CASE, BUILT-IN CABINET, OR IN ANOTHER CONFINED SPACE.
ENSURE THAT THE UNIT IS WELL VENTILATED. TO PREVENT THE RISK OF SHOCK OR FIRE HAZARD DUE TO OVER HEATING.
ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
Always comply with the following basic safety precautions when
installing and using the unit:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. DO NOT use this apparatus near water.
6. Clean only with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. DO NOT install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
9. DO NOT defeat the safety purpose of the polarized or ground-
ing-type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade, or the third prong, areprovided
for your safety. If the provided plug does not t into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on and/or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories which are specied by the
manufacturer.
12. Unplug this apparatus during lightning storms or when unused
for long periods of time.
13. Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
This equipment is not suitable for use in locations where children
are likely to be present. Equipment is intended for use only in a
restricted access area.
Minimum distances 10cm around the apparatus for sucient venti-
lation.
- 10cm distance minimale autour de lappareil pour une aération suff-
isante
The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloths, curtains, etc.
- il convient que laération ne soit pas gênée par obstruction des ouver-
tures daéra
No naked ame sources, such as lighted candles, should be placed
on the apparatus.
- il convient de ne pas placer sur lappareil de sources de flammes nues,
telles que des bougies allumées
The use of apparatus in moderate climates.
- si lappareil est destiné à être utilisé sous un climat tempéré.
CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE ANY FRONT/BACK COVERS OR PANELS.
NO USER-SERVICEABLE ARE NSIDE. REFER PARTS ANY
SERVICING TO QUALIFIED PERSONNEL.
The lightning flash with arrowhead sumbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons
.
The exclamation point within a unilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions.
The apparatus shall be connected to a mains socket
outlet with a protective earthing connection.
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Where the mains plug or an appliance coupler is
used as the disconnect device, the disconnect
device shall remain readily operable.
WARNING:
3
NQ-SYSCTRL
The System Controller provides a cost-effective way to deploy Nyquist based solutions using a state-of-the-art pro-
cessing platform pre-installed with the Nyquist application server software. The System Controller offers high-per-
formance operation for even the largest Nyquist system congurations and can simultaneously distribute an unlim-
ited number of audio streams anywhere across the network, making it perfect for background music applications.
The System Controller can manage applications that require any mix of multi-zone paging, intercom calling, or
background music distribution at businesses, restaurants, retail stores, industrial facilities, and many other venues.
It has a web-based graphical user interface (GUI) that is accessible from almost any personal computer (PC), tablet,
or mobile device.
The System Controller is designed to run on a 10/100 Ethernet network.
Installation
The System Controller can be shelf, wall, or rack mounted.
1. Either place the System Controller appliance on a shelf, or use the supplied mounting ears to mount it on a wall.
For rack mounting, use one of the available optional rack mount kits (NQ-RMK02, NQ-RMK03 or NQ-RMK04) as
applicable.
2. Connect the device to the 10/100 network using a CAT5 type cable.
3. Connect the power cord to the back of the unit.
4. If connecting auxiliary devices, such as a keyboard, mouse, or video monitor, connect the devices’ cables to the
appropriate connectors on the back of the device.
If connecting a video monitor, make sure to use the HDMI video output as the Digital Video Interface (DVI) out-
put is not supported. Use of the RS232 ports is also not supported.
5. Toggle the switch to the position.Power On
Once the System Controller is powered on and connected to the network, it can be accessed and
congured via the devices web-based GUI. There are two IP addresses available to access the web-based GUI: 1) a
default static IP (192.168.1.10) on Ethernet Port A and 2) Dynamic Host Conguration Protocol (DHCP) on Ethernet
Port B.
NOTE
You must have a valid software license activation key to set up and congure the System Controller during its initial use.
Viewing and Understanding the POWER LED
An LED labeled POWER appears on the front of the System Controller. This LED ap-
pears solid green when the device is powered on.
Using the Reset Button
The Reset button reboots the System Controller and launches the logon screen.


Produktspezifikationen

Marke: Bogen
Kategorie: Nicht kategorisiert
Modell: Nyquist NQ-SYSCTRL

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bogen Nyquist NQ-SYSCTRL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten