Brother DCP-J1700DW Bedienungsanleitung

Lies die bedienungsanleitung für Brother DCP-J1700DW (2 Seiten) kostenlos online; sie gehört zur Kategorie Drucker. Dieses Handbuch wurde von 54 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 9 Bewertungen. Hast du eine Frage zu Brother DCP-J1700DW oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick Setup Guide

Read the Product Safety GuideQuick Setup Guide first, then read this for the correct installation procedure. D02CPT001-00

ASA

Version 0

1Unpack the machine and check the components

Remove the protective tape or film covering the machine and the supplies. The components included in the box may differ depending on your country.

DCP-J1700DW

DCP-J1800DW

NOTE

• Save all packing materials and the box in case you must ship your machine.

• You must purchase the correct interface cable for the interface you want to use.

USB cable

Use a USB 2.0 cable (Type A/B) that is no more than 2 metres long.

Ethernet (Network) cable

Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX

Fast Ethernet Network.

NOTE

You can adjust the control panel angle

to read the LCD more easily.

The latest manuals are available at the Brother support website:

support.brother.com/manuals

Video setup instructions:

support.brother.com/videos

Open the output paper tray

cover a.

Adjust the paper guides.

Fan the paper well and load it

in the tray.

Close the output paper tray

cover, and then slowly push

the tray completely into the

machine.

Pull out the paper support , a

and unfold the paper support

flap b so that the printed

pages do not fall.

Follow the LCD instructions to install the ink cartridges. Close

the ink cartridge cover. The machine will prepare the ink tube

system for printing.

NOTE

The first time you install a set of ink cartridges, the machine will use

an amount of ink to fill the ink delivery tubes for high-quality printouts.

This process will only happen once.

Follow the LCD instructions to set the date and time.

After setting the date and time, you can set the Firmware Update

defaults.

After finishing the machine setup, you can change the paper type or size.

For more information about paper handling, see the Online User’s Guide

at support.brother.com/manuals.

2Load plain A4 paper in the paper tray

5Install the inbox ink cartridges

3Connect the power cord

Follow the LCD instructions,

and then press . The [OK]

machine prints the Print

Quality Check Sheet.

Follow the LCD instructions to

check the quality of the four

colour blocks on the sheet, and

then start the cleaning procedure

if required.

OK Poor

7Check the print quality

6Set the date and time

1

1

2

After turning the machine on, you may need to set your country or language

(depending on your machine). If required, follow the LCD instructions.

4Select your country or language

Open the ink cartridge cover and remove

the orange protective part from the

machine.

NOTE

Do not throw away the orange protective part.

You will need it if you transport the machine.

• Most of the machine illustrations in this Quick Setup Guide show the DCP-J1800DW.

• The images in this guide are for illustration purposes only and may differ from the

actual products.

zh-TW

EN

Produktspezifikationen