C2G 01159 Bedienungsanleitung


Lies die bedienungsanleitung für C2G 01159 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 12 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 6.5 Bewertungen. Hast du eine Frage zu C2G 01159 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
© 2024 Legrand All Rights Reserved rev. 8/24 Instruction sheet_C2G01159
Shielded Cat 6A Field Termination Plugs
Instruction Sheet
1. Remove the cover stopper from plug housing assembly before installation.
2. Strip off at least 1.5 inches of cable jacket. Fold or cut back shield to 0.4 inches, cut any
spline and wrap drain wire around foil.
3. Fan out all four twisted pairs. With the attached wiring cap label facing up, insert the
bottom row of conductors according to the indicated color code. Push the wiring cap
back to the cable foil and trim bottom conductors flush to cap end. Lace the remaining
conductors into the top row of the wiring cap according to indicated color code. Trim top
conductors at location shown in illustration.
4. Rotate the conductor assembly into position with the wiring cap label facing down.
Remove the wiring label from the cap and align the rear of the wiring cap with the
opening pocket guides of the plug receptacle.


Produktspezifikationen

Marke: C2G
Kategorie: Nicht kategorisiert
Modell: 01159

Brauchst du Hilfe?

Wenn Sie Hilfe mit C2G 01159 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten