Caliber PARK 300 Bedienungsanleitung


Lies die bedienungsanleitung für Caliber PARK 300 (11 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 56 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 28.5 Bewertungen. Hast du eine Frage zu Caliber PARK 300 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/11
E N G L I S H
1
PARK 300
PARK 300 parking sensor system consists of ultrasonic sensors,
digital control box and LCD display.The system detects the
distance between the car and front/rear bumper of the car.The
distance will be displayed in an innovative mode with the special
designed LCD, numeric display and step-up sounds, which will be
changed according to the actual positions detected obstruction so
that the driver could judge the distance and avoid accident.
INSTALLATION TOOLS
ADVISED POSITION TO INSTALL THE SENSORS
SELECT DRILLING POSITION FOR SENSOR A AND D
B. 0.5-0.8m vertically high to the ground, 0.55m
is recommended
C.Vertical, tidy surface without metal
components is preferred.
A. Choose suitable drilling position for A and D
sensor with relevant mark
B.To perform the best detecting angle, select the
position for A and D sensor with 8-13cm away
from the side, 11cm is recommended, and 20°
with the side.
A. 4 drilled holes (A, B, C, D) should be under
the same line.


Produktspezifikationen

Marke: Caliber
Kategorie: Nicht kategorisiert
Modell: PARK 300

Brauchst du Hilfe?

Wenn Sie Hilfe mit Caliber PARK 300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten