Canarm HVA24T10075 Bedienungsanleitung

Lies die bedienungsanleitung für Canarm HVA24T10075 (16 Seiten) kostenlos online; sie gehört zur Kategorie Ventilator. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 7 Bewertungen. Hast du eine Frage zu Canarm HVA24T10075 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

M0112_NOV 2020Page 1 of 8www.CANARM.COM

Canarm Ltd. - Corporate Head Office 2157 Parkedale Avenue, PO Box 367 Brockville, Ontario Canada K6V 5V6

Tel: (613) 342-5424 Fax: (613) 342-8437 [email protected] www.canarm.com

WALL EXHAUST FANS

BELT & DIRECT DRIVE

INSTALLATION AND MAINTENANCE INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

Models:XB, HV, HVA, HVAR, ADD, ADDR, DDS, DDP, SXB, SADD

THE PURPOSE OF THIS MANUAL IS TO AID IN THE PROPER INSTALLATION AND OPERATION OF THE

FANS. THESE INSTRUCTIONS ARE INTENDED TO SUPPLEMENT GOOD GENERAL PRACTICES AND ARE

NOT INTENDED TO COVER DETAILED INSTRUCTION PROCEDURES. IT IS THE RESPONSIBILITY OF THE

PURCHASER TO ASSURE THAT THE INSTALLATION AND MAINTENANCE OF THIS EQUIPMENT IS

HANDLED BY QUALIFIED PERSONNEL.

Inspect all shipments carefully for damage. THE RECEIVER MUST NOTE ANY DAMAGE ON THE CARRIER’S

BILL OF LADING AND FILE A CLAIM IMMEDIATELY WITH THE FREIGHT COMPANY.

ELECTRICAL CONNECTIONS

WARNING: BE SURE POWER IS OFF AT THE ELECTRICAL PANEL BEFORE WIRING.

WARNING: ALL ELECTRICAL WORK SHOULD BE PERFORMED

BY A QUALIFIED ELECTRICIAN.

INSTALLATION

1. Cut and frame the appropriate wall opening. Fans mounted to a wall require a different wall opening than fans

mounted in cabinets or sleeves. For specic dimensions, refer to the submittal drawing for the specic fan

conguration.

2. Mount the fan in the opening with the fan panel directly over the load bearing support and if this is not practical

angle supports must be provided to transfer the fan weight to the load bearing structure.

3. Caution: The fan contains rotating parts and requires electrical service. Appropriate safety precautions should

be taken during installation, operation and maintenance.

4. Warning: Do not install or operate this fan in an environment where combustible materials, gasses or fumes

are present unless it was specically designed and manufactured for that application.

5. A damper, if used, should be securely mounted in a manner that allows free and unobstructed operation.

6. All electrical work must be done, in accordance with all applicable electrical codes, by a qualied electrician.

Please follow all applicable national, state/provincial and local codes, all of them will supersede this manual.

7. Prior to wiring ensure the power supply is locked in the OFF position and that the motor nameplate voltage

and the supply voltage match.

8. Be sure to keep all wiring clear of any rotating parts.

9. Before starting the fan ensure that the wheel rotates freely.

Produktspezifikationen