Canon MS-210D Bedienungsanleitung

Lies die bedienungsanleitung für Canon MS-210D (2 Seiten) kostenlos online; sie gehört zur Kategorie Objektiv. Dieses Handbuch wurde von 40 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 8 Bewertungen. Hast du eine Frage zu Canon MS-210D oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Clamper

《CR-10》

Flexible focus

module

《

FFM-100》

Flexible cable

《

FC-40》

Zoom demand

《ZSD-300D》

Flexible focus

controller

《FFC-200》

Fixing knob

Zoom speed control knob

Frame switch

RET switch

Thumb ring

Fastening knobs

Mounting knob

Reverse switch

Memo switch

Shtl switch

VTR Switch

Fastening knobs

Mounting knob

Clamper

《CR-10》

1x

2x

■

■

■

■

■

■

■

■

■

■

■

■

■

■

ft

m

■

■

■

■

■

Drive unit

Fixing screw

Lens

Zoom

Lever

1/2

© 2022.10 CANON INC. BT1-D023-A-ENG

Zoom demand (ZSD-300D)

Flexible focus controller (FFC-200)

Flexible focus module (FFM-100)Flexible cable (FC-40)

Clamper 2pcs

(CR-10)

Operation Manual

1

　

PRODUCT COMPONENTS

Lens Accessory

Studio Conversion Kit

MS-210D

2

　

SYSTEM CONFIGURATION3

　

MOUNTING

[Attaching focusing group]

1.Inserttheguidepinorxingscrewoftheexiblefocusmodule<FFM-100>intothe

guideholeorxingscrewhole.Makecertainthegearonthefocusringofthelens

bodyengagestheoneontheexiblefocusmodule.

2.Loosenthetwofasteningknobsoftheclamper<CR-10>andmounttheclamper

onthepanhandle,thentightentheknobs.

3.Engagetherosejointoftheflexiblefocuscontroller<FFC-200>andthatofthe

clamper,andthentighenthemwiththemountingknoboftheclamper.

4.Finally,makecertainthefocusringonthelensbodyrotatesbyrotatingthegripof

theexiblefocuscontroller.

NOTE

Beforeattachingtheexiblefocusmoduletothelens,removethezoomlever.

Besuretokeepitsoasnottoloseit.

[Attaching zooming group]

1.Loosenthetwofasteningknobsoftheclamperandmounttheclamperonthepan

handle,thentighentheknobs.

2.Engagetherosejointofthezoomdemand<ZSD-300D>andthatoftheclamper,

andthentighenthemwiththemountingknoboftheclamper.

3.Connecttheremoteconnectoronthelensbodywiththecableconnectorfrom

thezoomdemandusingtheconnectingcable.Besuretotthepositioningpin

properlywhenpluggingtheconnectorin.

Thankyouforpurchasingastudioconversionkit<MS-210D>.

Thestudioconversionkit<MS-210D>suppliesalltheaccessoriesnecessaryto

convertcamerasmountedwithdigitaldriveunitloadinglensinto“rearview”TV

cameras that can be mounted on a tripod.

Whenusingthelensofanalogdriveunitloading,aconversioncable<CC-0820>is

needed separately.

In that case, a part of the function is restricted.

Beforeusingtheproduct,makesuretoreadthe"GENERALSAFETYINFORMATION"

and be sure to use the product correctly.

ENGOPERATION MANUAL

Operation ManualOperation Manual

(Regulations)

Produktspezifikationen