CDN ProAccurate INTP662 Bedienungsanleitung

CDN Thermometer ProAccurate INTP662

Lies die bedienungsanleitung für CDN ProAccurate INTP662 (5 Seiten) kostenlos online; sie gehört zur Kategorie Thermometer. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 2 Bewertungen. Hast du eine Frage zu CDN ProAccurate INTP662 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/5

for non-contact and internal temperatures

•NSF

Certified

•1&3secondresponses

•1.5mmthintip

•3.75”(9.53cm)probe

•Infraredfornon-contactsurfacetemperatures

•Thermocoupleprobeforinternaltemperatures

•Dualfunction

•Maximum,minimumandlockmodesforcontinuous

scanning

•8-beamlasertargetillumination

•Distance:Spot=8:1

•Data-hold

•One-buttonoperation

•BacklitHACCPchecklights

•Batterystatusindication

•Food-safeABSplasticwithBioCote

•Stainlesssteelprobe

•Auto-off

•Batteryandinstructionsincluded

Get Professional Results

Every Time!

Monitoringtemperatureisessentialtokeepingfoodsafe.

TheversatileINTP662isapowerhousekitchentool.

Simplypointtheinfraredguntowardthetargetandpress

thetriggertogetaquickreadingofsurfacetemperatures

orflipdowntherapid-responsethermocoupleprobeto

measureinternaltemperatures.IntegratedHACCPcheck

backlightinginstantlyshowsiftemperaturesarewithin

HACCPguidelinesforsafefoodtemperatures.

Minimum, Maximum and Lock

TheINTP662alsooffersMinimum,Maximum,andLock

modes.Minimummodedisplaysthelowesttemperature

amongmultipletargets.Maximummodedisplaysthe

highesttemperatureamongmultipletargets.WhileLock

modecontinuouslydisplaysthetemperatureforupto

60minutes.Thisisparticularlyusefulforcontinuous

temperaturemonitoring.

Note:Removestickerfromdisplaybeforeuse.Cleanthe

thermometerprobebeforeeachuse.

Important: DO NOT LEAVE THERMOMETER IN HOT OVEN.

HAND WASH AND DRY. DO NOT IMMERSE HOUSING IN

LIQUID.

Note:Inthefollowinginstructions,namesofthecontrol

buttonsareshowninCAPS.Functioninformationthat

appearsonthedisplayisshownin .BOLD CAPS

Battery Installation

ReplacebatterywhenLCDbecomesdim.Poweroffthe

unitbeforeinstallingthebatteries.Amalfunctionmay

occurifthepowerisonwhenthebatteryisinstalled.Ifa

malfunctionoccurs,restartthedevice.

1. Removebatterycoverbyslidingitdownalongthe

handle.

2. Installtwo1.5VAAAbatteriesobservingpolarity

shownincompartment.

3. Replacethebatterycoveruntilitclicksshut.

Model: INTP662

ProAccurate

Infrared Gun/

Thermocouple Thermometer

Infrared:-76to+662°F/-60to+350°C

Thermocouple:-76to+662°F/-60to+350°C

Operating Instructions

Mode Selection:MINØ Ø ØMAX LOCK °C/°FØEMIS

A. Temperature Scale

ToselecttemperaturereadinginFahrenheitorCelsius:

1. Pressthetriggertoturnthethermometeron.

2. PresstheMODEbuttonfourtimes.The°F or °C

symbolflashesonthedisplay.

3. PresstheSCANbuttontochangethescale.

B. Infrared Thermometer

InfraredisthedefaultmodeoftheINTP662.

Note:TheINTP662isintendedforfoodserviceuse—donotuse

forsafetyrelatedapplications.

1. Infrared Scanning

a. Distance:Spot = 8:1

Forexample,ifthe

surfaceareabeing

measuredis10"in

diameter,thenthethermometermustbewithin

80"ofthetargetforanaccuratereading.

b. Aimtheinfraredlensatthetargetandpress

thetriggertodisplaythesurfacetemperature.

The8-beamlaserlightautomaticallyilluminates

thetarget,specifyingtheapproximate

measurementareaforbettertargeting.

c. The8-beamlaserlightformsacirclethat

definestheareaofmeasure.Makesurethe

circleissmallerthantheareabeingmeasured.

Ifthelaserlightcircleislargerthanthearea

beingmeasured,thereadingwillincludeambient

temperaturesandmakethereadinginaccurate.

d. Measurementcontinuesaslongasthetrigger

ispressed.Thenewestreadingupdatesthe

display.

e. Whenthetriggerisreleased,HOLD appears on

thedisplayandthelastreadingremainsvisible

for15secondsbeforetheunitautomatically

powersoff.

2. Minimum Mode

a. Pressthetriggertoturnthethermometeron.

b. PresstheMODEbuttononce. flashesonMIN

thedisplay.

c. PressthetriggertoconfirmtheMinimumMode

anddisplaythelowesttemperatureamong

multipletargets. remainsonthedisplay.MIN

d.Thethermometercontinuestodisplaythe

minimumreadingduringeachmeasurement

perioduntiltheMODEbuttonispressedagainor

theunitpowersoff.

3. Maximum Mode

a. Pressthetriggertoturnthethermometeron.

b. PresstheMODEbuttontwice. flashesonMAX

thedisplay.

c. PressthetriggertoconfirmtheMaximumMode

anddisplaythehighesttemperatureamong

multipletargets. remainsonthedisplay.MAX

d.Thethermometercontinuestodisplaythe

maximumreadingduringeachmeasurement

perioduntiltheMODEbuttonispressedagain

ortheunitpowersoff.

4. Lock Mode

Thisisparticularlyusefulforcontinuous

temperaturemonitoring.

a. Pressthetriggertoturnthethermometeron.

b. PresstheMODEbuttonthreetimes.LOCK

flashesonthedisplay.

c. PressthetriggertoconfirmtheLockMode.

The°F or °Csymbolflashesonthedisplay.

d. Thethermometercontinuouslydisplaysthe

temperatureforupto60minutesoruntilthe

triggerispressedagain.

5. Emissivity

Everythinggivesoffacertainamountofradiation.

Emissivityisthemeasureofthisthermalradiation.

Theinfraredthermometerissuppliedwithadefault

emissivityof0.95,whichstandardformostuses.

Theemissivityofthethermometercanbechanged

from0.10(10E)to1(100E).Only experienced

personnel should attempt to make changes.

Forinformationrelatingtotheemissivityofspecific

materials,pleasecontactCDN.

a. Pressthetriggertoturnthethermometeron.

b. PresstheMODEbuttonfivetimestoenter

EmissivityMode. flashesonthedisplay.95E

c. Pressthetriggertoadjusttheemissivityvalue

in0.01(1E)increments.

d. PresstheMODEbuttonagaintoexit

EmissivityMode.

Note:Non-contactinfraredthermometersarenot

recommendedforuseinmeasuringthetemperatureof

shinyorpolishedmetals.

6. Error Messages

TheINTP662incorporatesvisualdiagnostic

messagesasfollows:

a. HI LO or isdisplayedwhenthetemperature

beingmeasuredisoutsidetheinfraredrange

oftheinstrument.

1.)HI indicatesthatthetemperatureishigher

than+662°F/+350°C.

2.)LO indicatesthatthetemperatureis

lowerthan-76°F/–60°C.

b. Allowaminimum30minutesforthe

thermometertostabilizetotheworking/room

temperature.

Distance:Spot(FOV)=8:1

Emissivity=0.1~1,Step.01

WaveLength=8~14µm

CAUT ION: Never point the unit and/or las er toward s

anyone’s eyes. Do not look directly into the laser

beam s — permanent eye damage may result. Keep

away from children.

1.)ER2 isdisplayedwhenthethermometeris

exposedtorapidchangesinthe

ambienttemperature.

2.)ER3 isdisplayedwhentheambienttemperature

exceeds-32°F/0°COR+122°F/+50°C.

c. Forallothererrormessagesitisnecessary

toresetthethermometer.

1.)Waitforthethermometertopoweroff.

2.)Removethebatteryandwaitforaminimum

ofoneminute.

3.)Reinstallthebattery(seeBattery Installation).

4.)PresstheTriggertoturnthethermometeron.

5.)Iftheerrormessageremains,pleasecontact

CDNforfurtherassistance.

C. Thermocouple Probe

Important: The probe may be damaged if measurement

temperature is lower than -76°F/-50°C OR higher than

+662°F/+350°C.

1. Flipdowntheprobeuntilfullyextended.

Important: Do not twist the probe or rotate it in wrong

direction. Exceptional stress on probe may cause it to break.

CAUTION:Toavoidelectricshockandthermometerdamage,

donotusethethermocoupleprobetomeasurelivecircuitwhere

voltageexceeding24VACRMSor60VDC.

2. Inserttheprobeatleast1"/2.5cmintothefood.

3. PressthePROBEbuttontocontinuouslydisplay

thetemperatureforupto4minutesbeforetheunit

automaticallypowersoff.Thedisplayflashes.

Note:PressingthePROBEbuttonmayinterruptthelast

infraredHOLDreading.PressthePROBEbuttonagaintoreturn

toinfraredscanning.

4. Wearingaheatresistantglove,fliptheprobeback

intothecasewhenfinished.

CAUTION:ProbemaybeHOTafteruse.Alwayswearaheat

resistantglovetotouchthestainlesssteelprobeduringorjust

aftercooking.Do not touch with bare hands.

5. PressthePROBEbuttonagaintoreturntoinfrared

scanning.

D. HACCP Check

IntegratedHACCPcheckbacklightsinstantlyshowif

temperaturesarewithinHACCPguidelinesforsafe

foodtemperatures.

Note:TheGREENandREDLEDbacklightwillalwaysbelitbefore

poweroff.

1. A LEDbacklightindicatesasafecoolorGREEN

frozenconditionbelow40°F/4°Corasafeholding

temperatureabove140°F/60°C.

3. A LEDbacklightindicatesthatthetemperatureRED

iswithinthe of40toHACCP Danger Zone

140°F/4to60°C.

E. Battery Status

Thethermometerincorporatesvisualbatterystatus

indication:

1. measurementsarepossible Battery OK:

2. Battery Low:replacebatterywithtwo1.5V

AAAAlkalinecells;measurementsarepossible

3. replacebattery; Battery Exhausted:

 measurementsarenotpossible

Care of Your Product

•Thesensorlensisthemostdelicatepartofthe

thermometerandshouldbekeptcleanatalltimes.

Takecarewhencleaningthelens.Useonlyasoftcloth

orcottonswabwithwaterorrubbingalcohol.Allowthe

lenstodryfullybeforeusingthethermometer.

•Donotsubmergeanypartofthethermometerinwater.

Wipecleanwithadampcloth.

•Storethethermometeratroomtemperaturebetween

-4to+149°F/–20to+65°C.

Precautions

•Disposeofusedbatterypromptlyandkeepawayfrom

children.

•Alwayswearaheatresistantglovetotouchthe

stainlesssteelprobeduringorjustaftercooking.

Do not touch with bare hands.

•Keepthebatteries,stainlesssteelprobeandlaser

awayfromchildren.

•Cleantheprobeanddrythoroughlyafteruse.

•Donotcleanthecasewithabrasiveorcorrosive

compound,whichmayscratchtheplasticandcorrode

theelectroniccircuits.

•Donotsubjecttheunittoexcessiveforceshock,

dust,temperatureorhumidity,whichmayresultin

malfunction,shorterelectroniclifespan,damaged

batteryanddistortedparts.

•Donottamperwiththeunit’sinternalcomponents.

Doingsowillinvalidatethewarrantyontheunit

andmaycauseunnecessarybatterydamageand

distortedparts.

•Donotsubjecttheunittoexcessiveexposuretodirect

sunlight.The unit is not waterproof—donotimmerse

itintowaterorexposetoheavyrain.

•Toavoiddeformation,donotplacetheunitinextreme

temperatures.Neverburntheprobedirectlyover

thefire.Donotusetheprobewhenthetemperature

isabove662°F/350°C.Doingsowilldeteriorate

theprobe.

•Donotusethethermometerinamicrowaveoven.

•Alwaysreadtheusersmanualthoroughlybefore

operating.

EMC/RFI

Readingsmaybeaffectediftheunitisoperatedwithinaradio

frequency electromagnetic field strength of approximately

3voltspermeter,buttheperformanceoftheinstrumentwill

notbepermanentlyaffected.

Produktspezifikationen

Marke:	CDN
Kategorie:	Thermometer
Modell:	ProAccurate INTP662

Brauchst du Hilfe?

Wenn Sie Hilfe mit CDN ProAccurate INTP662 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Thermometer CDN

CDN ProAccurate INTP662 Bedienungsanleitung

11 Juli 2025

CDN ProAccurate RFT1 Bedienungsanleitung

10 Juli 2025

CDN ProAccurate GTS800X Bedienungsanleitung

10 Juli 2025

CDN ProAccurate FG80 Bedienungsanleitung

10 Juli 2025

CDN ProAccurate INTP626X Bedienungsanleitung

10 Juli 2025

CDN TA20 Bedienungsanleitung

18 August 2024

CDN ProAccurate POT750X Bedienungsanleitung

18 August 2024

CDN ProAccurateDOT2 Bedienungsanleitung

18 August 2024

CDN ProAccurateHOT1 Bedienungsanleitung

18 August 2024

CDN EOT1 Bedienungsanleitung

18 August 2024

Bedienungsanleitung Thermometer

Neueste Bedienungsanleitung für -Kategorien-

Emga 843005 Bedienungsanleitung

11 Juli 2025

Inkbird IDT-22-B Bedienungsanleitung

10 Juli 2025

Inkbird INK-IFT03 Bedienungsanleitung

10 Juli 2025

Inkbird INT-14-BW Bedienungsanleitung

10 Juli 2025

Inkbird INT-21-B Bedienungsanleitung

10 Juli 2025

Inkbird ITH-21-B Bedienungsanleitung

10 Juli 2025

Inkbird ITH-13-B Bedienungsanleitung

10 Juli 2025

Inkbird IDT-34E-BW Bedienungsanleitung

9 Juli 2025

Inkbird INT-11I-B Bedienungsanleitung

9 Juli 2025

Inkbird ITH-11-B Bedienungsanleitung

9 Juli 2025