CDN IN1022 Bedienungsanleitung

CDN Thermometer IN1022

Lies die bedienungsanleitung für CDN IN1022 (5 Seiten) kostenlos online; sie gehört zur Kategorie Thermometer. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu CDN IN1022 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF
Seite 1/5
Perfect For
•Non-contactsurfacetemperatures
Easy To Use
•1-secondresponse
•8-beamlasertargetillumination
•Backlit
•Data-hold
•One-buttonoperation
Features
•Memory
•Maximum,minimum,difference,averagewithlockfor
continuousscanning
•Highandlowalerts
•Distance:spot=12:1
•Batterystatusindication
•ABSplastic
•Auto-off
•Batteriesandinstructionsincluded
Get Professional Results
Every Time!
Monitoringtemperatureisessentialtokeepingfood
safe.TheversatileIN1022isperfectforanyapplication.
Simplypointtheinfraredsensorlenstowardthetarget
andpressthetriggertogetaquickreadingofsurface
temperatures.
Maximum, Minimum, Difference
and Average Modes
TheIN1022alsooffersMaximum,Minimum,Difference
andAveragemodes.Maximummodedisplaysthehighest
temperatureamongmultipletargets.Minimummode
displaysthelowesttemperatureamongmultipletargets.
Differencemodedisplaysthedifferencebetweenthe
maximumandminimumtemperaturemeasurements
ofmultipletargets.WhileAveragemodedisplaysthe
averagetemperaturemeasurementsofmultipletargets.
Lock Mode
Lockmodecontinuouslymeasuresthetemperature
forupto60minutes.Thisisparticularlyusefulfor
continuoustemperaturemonitoring.
High and Low Alerts
TheIN1022providesaprogrammablehighandlowalert
formeasurementsthatareoutofthedesiredrange.
Note:Removestickerfromdisplaybeforeuse.
Note:Inthefollowinginstructions,namesofthecontrol
buttonsareshowninCAPS.Functioninformationthatappears
onthedisplayisshowninBOLD CAPS.
Battery Installation
ReplacebatterywhenLCDbecomesdimoralarm
leveldeclines.Powerofftheunitbeforeinstallingthe
batteries.Amalfunctionmayoccurifthepowerison
whenthebatteryisinstalled.Ifamalfunctionoccurs,
restartthedevice.
1. Removebatterycoverbyslidingitinthedirectionof
thearrow.
2. Installtwo1.5VAAAbatteriesobservingpolarity
shownincompartment.
3. Replacethebatterycoveruntilitclicksshut.
Model: IN1022
Infrared Gun
-76to+1022°F/-60to+550°C
Operating Instructions
Mode Selection: E
Ø
Eâ á
Ø
MAX
Ø
MIN
Ø
DIF
Ø
AVG
Ø
HAL
Ø
LAL
A. Temperature Scale
ToselecttemperaturereadinginFahrenheit
orCelsius:
1. PresstheMODEbuttonortriggertoturnthe
thermometeron.
2. Pressthe°C/°Fbuttontochangethescale.
B. Backlit Display
Toturnthebacklitdisplayonandoff:
1. PresstheMODEbuttonortriggertoturnthe
thermometeron.
2. Pressandholdthetriggerandthenalsopress
theLOCKbuttontoturnthebacklitdisplayonand
off.TheBACKLIGHT icon( )appearsinthetop
portionofthedisplaywhenon.
C. Laser Light
Toturnthelaserlightonandoff:
1. PresstheMODEbuttonortriggertoturnthe
thermometeron.
2. Pressandholdthetriggerandthenalsopressthe
C°/F°buttontoturnthelaserlightonandoff.The
LASER icon( )appearsinthetopportionofthe
displaywhenon.
E. Lock Mode
Thisisparticularlyusefulforcontinuoustemperature
monitoringforupto60minutesandcanbeusedwith
Minimum,Maximum,DifferenceandAveragemodes.
1. PresstheMODEbuttonortriggertoturnthe
thermometeron.
2. PresstheLOCKbutton. appearsinthetopLOCK
portionofthedisplaywhenon.
3. Thethermometercontinuouslydisplaysthe
temperatureforupto60minutesorrestartsthe
timeifthetriggerispressedagain.
F. Infrared Thermometer
Note:TheIN1022isintendedforfoodserviceuse—donotusefor
safetyrelatedapplications.
1. Infrared Scanning
1. Distance:Spot = 12:1
Forexample,ifthesurface
areabeingmeasuredis
10"indiameter,thenthethermometermustbe
within120"ofthetargetforanaccuratereading.
2. Aimtheinfraredlensatthetargetandpress
thetriggertodisplaythesurfacetemperature.
Ifon,thelaserlightautomaticallyilluminates
thetarget.
3. The8-beamlaserlightformsacirclethatdenes
theareaofmeasure.Makesurethecircleis
smallerthantheareabeingmeasured.Ifthe
laserlightcircleislargerthantheareabeing
measured,thereadingwillincludeambient
temperaturesandmakethereadinginaccurate.
4. Measurementcontinuesaslongasthetriggeris
pressed.Thenewestreadingupdatesthedisplay.
5. Whenthetriggerisreleased, appearsonHOLD
thedisplayandthelastreadingremainsvisible
for60secondsbeforetheunitautomatically
powersoff.
2. Emissivity
Everythinggivesoffacertainamountofradiation.
Emissivityisthemeasureofthisthermalradiation.
Theinfraredthermometerissuppliedwithadefault
emissivityof0.95,whichstandardformostuses.
Theemissivityofthethermometercanbechanged
from0.1(10E)to1(100E).Only experienced
personnel should attempt to make changes.
Forinformationrelatingtotheemissivityofspecic
materials,pleasecontactCDN.
1. PresstheMODEbuttonortriggertoturnthe
thermometeron.
2. PresstheMODEbuttonuntil appearsintheE
lowerleftcornerofthedisplay.Thecurrent
emissivitysettingappearsinthelowerright
cornerofthedisplay
3. PresstheMODEbuttonagaintoadjustthe
emissivityvaluein0.01(1E)incrementsinthe
EmissivityEditMode.âEáappearsinthelower
leftcornerofthedisplay.
4. Pressthe°C/°Fbuttontodecreasethe
emissivityvalue.PresstheLOCKbuttonto
increasetheemissivityvalue.Pressandholdfor
fastadvance.
5. PresstheMODEbuttonagaintoexitEmissivity
EditModeandenterMAXMode.
Note:Non-contactinfraredthermometersarenot
recommendedforuseinmeasuringthetemperatureof
shinyorpolishedmetals.
3. Maximum Mode
1. PresstheMODEbuttonortriggertoturnthe
thermometeron.
2. PresstheMODEbuttonrepeatedlyuntilMAX
appearsinthelowerleftportionofthedisplay.
3. Aimtheinfraredlensatthetargetandpressthe
triggertodisplaythesurfacetemperature.
4. Measurementcontinuesaslongasthetrigger
ispressedorfor60minutesinLockMode.
TheMAXreadingdisplaysthehighest
temperatureamongmultipletargets.
4. Minimum Mode
1. PresstheMODEbuttonortriggertoturnthe
thermometeron.
2. PresstheMODEbuttonrepeatedlyuntilMIN
Distance:Spot(FOV)=12:1
Emissivity=0.1~1,Step.01
WaveLength=8µm-14µm
CAUTION: Never point the unit and/or laser towards
anyone’s eyes. Do not look directly into the laser
beams — permanent eye damage may result. Keep
away from children.
appearsinthelowerleftportionofthedisplay.
3. Aimtheinfraredlensatthetargetandpressthe
triggertodisplaythesurfacetemperature.
4. Measurementcontinuesaslongasthetrigger
ispressedorfor60minutesinLockMode.
TheMINreadingdisplaysthelowesttemperature
amongmultipletargets.
5. Difference Mode
1. PresstheMODEbuttonortriggertoturnthe
thermometeron.
2. PresstheMODEbuttonrepeatedlyuntilDIF
appearsinthelowerleftportionofthedisplay.
3. Aimtheinfraredlensatthetargetandpressthe
triggertodisplaythesurfacetemperature.
4. Measurementcontinuesaslongasthetrigger
ispressedorfor60minutesinLockMode.
TheDIFreadingdisplaysthedifferencebetween
themaximumandminimumtemperaturesof
multipletargets.
6. Average Mode
1. PresstheMODEbuttonortriggertoturnthe
thermometeron.
2. PresstheMODEbuttonrepeatedlyuntilAVG
appearsinthelowerleftportionofthedisplay.
3. Aimtheinfraredlensatthetargetandpressthe
triggertodisplaythesurfacetemperature.
4. Measurementcontinuesaslongasthetrigger
ispressedorfor60minutesinLockMode.
TheAVGreadingdisplaystheaverage
temperatureofmultipletargets.
7. Error Messages
TheIN1022incorporatesvisualdiagnostic
messagesasfollows:
1. or isdisplayedwhenthetemperatureHI LO
beingmeasuredisoutsidetheinfraredrangeof
theinstrument.
a. HIindicatesthatthetemperatureishigher
than+1022°F/+550°C.
b. LOindicatesthatthetemperatureislower
than-76°F/–60°C.
2. Allowaminimum30minutesforthe
thermometertostabilizetotheworking/room
temperature.
a. ER2isdisplayedwhenthethermometeris
exposedtorapidchangesintheambient
temperature.
b. ER3isdisplayedwhentheambient
temperatureexceeds32°F/0°COR
122°F/50°C.
3. Forallothererrormessagesitisnecessaryto
resetthethermometer.
a. Waitforthethermometertopoweroff.
b. Removethebatteryandwaitforaminimum
ofoneminute.
c. Reinstallthebattery(seeBattery Installation).
d. PresstheMODEbuttonortriggertoturnthe
thermometeron.
e. Iftheerrormessageremains,pleasecontact
CDNforfurtherassistance.
G. Temperature Alerts
1. High Alert
Analertwillsoundwhenthemeasuredtemperature
exceedsthealerttemperaturesetting.
1. PresstheMODEbuttonortriggertoturnthe
thermometeron.
2. PresstheMODEbuttonrepeatedlyuntil HAL
appearsinthelowerleftportionofthedisplay.
3. Pressthe°C/°FbuttontodecreasetheHigh
Alerttemperature.PresstheLOCKbuttonto
increasetheHighAlerttemperature.Pressand
holdforfastadvance.
4. PressthetriggertoconrmtheHighAlert
temperaturesetting.
2. Low Alert
Analertwillsoundwhenthemeasuredtemperature
exceedsthealerttemperaturesetting.
1. PresstheMODEbuttonortriggertoturnthe
thermometeron.
2. PresstheMODEbuttonrepeatedlyuntil LAL
appearsinthelowerleftportionofthedisplay.
3. Pressthe°C/°FbuttontodecreasetheLow
Alerttemperature.PresstheLOCKbuttonto
increasetheLowAlerttemperature.Pressand
holdforfastadvance.
4. PressthetriggertoconrmtheLowAlert
temperaturesetting.
H. Battery Status
Thethermometerincorporatesvisualbatterystatus
indication:
1. measurementsarepossibleBattery OK:
2. replacebatterywithtwo1.5VBattery Low:
AAAAlkalinecells;measurementsarepossible
3. replacebattery;Battery Exhausted:
measurementsarenotpossible
EMC/RFI
Readingsmaybeaffectediftheunitisoperatedwithinaradio
frequency electromagnetic eld strength of approximately
3voltspermeter,buttheperformanceoftheinstrumentwill
notbepermanentlyaffected.

Produktspezifikationen

Marke: CDN
Kategorie: Thermometer
Modell: IN1022

Brauchst du Hilfe?

Wenn Sie Hilfe mit CDN IN1022 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Thermometer CDN

CDN

CDN IN1022 Bedienungsanleitung

16 Juli 2025
CDN

CDN IN482 Bedienungsanleitung

15 Juli 2025
CDN

CDN DTP392 Bedienungsanleitung

15 Juli 2025
CDN

CDN DTL572 Bedienungsanleitung

15 Juli 2025
CDN

CDN TCH130 Bedienungsanleitung

15 Juli 2025
CDN

CDN TCG400 Bedienungsanleitung

14 Juli 2025
CDN

CDN DTC450 Bedienungsanleitung

14 Juli 2025
CDN

CDN ProAccurate INTP662 Bedienungsanleitung

11 Juli 2025
CDN

CDN ProAccurate RFT1 Bedienungsanleitung

10 Juli 2025
CDN

CDN ProAccurate GTS800X Bedienungsanleitung

10 Juli 2025

Bedienungsanleitung Thermometer

Neueste Bedienungsanleitung für -Kategorien-

Bresser

Bresser Quadro NV Thermo-Hygrometer Bedienungsanleitung

16 Juli 2025
NEO Tools

NEO Tools 75-276 Bedienungsanleitung

15 Juli 2025
NEO Tools

NEO Tools 75-275 Bedienungsanleitung

15 Juli 2025
PCE Instruments

PCE Instruments PCE-IR 1800 Bedienungsanleitung

15 Juli 2025
Emga

Emga 843005 Bedienungsanleitung

11 Juli 2025
Inkbird

Inkbird IDT-22-B Bedienungsanleitung

10 Juli 2025
Inkbird

Inkbird INK-IFT03 Bedienungsanleitung

10 Juli 2025
Inkbird

Inkbird INT-14-BW Bedienungsanleitung

10 Juli 2025
Inkbird

Inkbird INT-21-B Bedienungsanleitung

10 Juli 2025
Inkbird

Inkbird ITH-21-B Bedienungsanleitung

10 Juli 2025