Chauvet IRC-6 Bedienungsanleitung

Lies die bedienungsanleitung für Chauvet IRC-6 (6 Seiten) kostenlos online; sie gehört zur Kategorie Fernbedienung. Dieses Handbuch wurde von 79 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 40 Bewertungen. Hast du eine Frage zu Chauvet IRC-6 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

5200 N.W. 108th Ave., Sunrise, FL 33351 U.S.A. (800) 7624455 FAX (954) 929-1084 – (954) 577--5560

www.chauvetlighting.com

IRC-6 (Infrared Remote Control 6) Operation

Note: Make sure to point the IRCdirectly at the receiver on the product.-6

Automatic Mode

Automatic mode will enable you to run the automatic programs on the product.

To turn on Automatic mode:

1.6. Press <AUTO> on the IRC-

2. Press <+> or <–> to choose between the different auto programs.

To adjust the speed of the automatic program:

1.6. Press <SPEED> on the IRC-

2. Press . <%>

3.or Press <+> <–> to either increase or decrease the speed of the program.

Sound- Active Mode

Sound-Active mode will enable the product to respond to the music.

To turn on SoundActive mode:-

•Press - <SOUND> on the IRC6.

To adjust sound sensitivity in SoundActive mode:-

1. ss Pre<SENSITIVITY> on the IRC- 6.

2. Press . <%>

3.or Press <+> <–> to either increase or decrease sound sensitivity.

Manual Color Control

To choose a specific color with the IRC-6:

1.6. Press <MANUAL> on the IRC-

2. Press any number between to choose your color.<0> and <9>

To manually control the RGBWA+UV percentage:

1.6. Press <MANUAL> on the IRC-

2. Press , <R>, , <G><B> <W>, <A>, or <UV> (red, green, blue, white, amber, or ultraviolet) to choose your color.

Note: To use the white, amber, or UV color options, the fixture must be capable of outputting that corresponding color

light.

3.or Press <+> <–> to increase or decrease the percentage of each color.

Miscellaneous Operation

To adjust the strobe rate of the program:

1. Press <STROBE> on the IRC- 6.

2.or Press <+> <–> to increase or decrease the strobe rate.

3. Press <STROBE> again to turn off the strobe.

To fade the light output:

•Press - <FADE> on the IRC6.

To black out the lights:

•Press -<BLACK OUT> on the IRC6. This will turn off all the lights until the button is pressed again.

Note: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a

button is pressed, try pressing <BLACK OUT>. You may haveinadvertently activated Black Out.

These are basic instructions for the IRC-6. See your product's User Manual for more detailed operation.

Produktspezifikationen