Chief CMS261W Bedienungsanleitung

Chief Beamerzubehör CMS261W

Lies die bedienungsanleitung für Chief CMS261W (4 Seiten) kostenlos online; sie gehört zur Kategorie Beamerzubehör. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 18 Bewertungen. Hast du eine Frage zu Chief CMS261W oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/4

I N S T A L L A T I O N I N S T R U C T I O N S

Cut-Off Thread Adapter

CMS261

CMS261 Installation Instructions

DISCLAIMER

Milestone AV Technologies, Inc., and its affiliated corporations

and subsidiaries (collectively, "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT WARNINGS AND

CAUTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components attached to the CMS-261 does not exceed

500 lbs (226.80 kg).

• The weight capacity of the CMS-261 may be LIMITED

to the lowest weight capacity of any other component

located between the CMS-261 and the supporting

structure!

DIMENSIONS

135.00°

2.338

59.39

90.00°

3X 5/16-18 THREADED HOLE 1-1/2 NPT THREADS

40.44

1.592

51.56

2.030

114.30

4.500

57.15

2.250

48.26

1.900

3X 1.000

25.40

MEASUREMENTS: [MILLIMETERS]

INCHES

Installation Instructions CMS261

TOOLS REQUIRED / PARTS PROVIDED

ASSEMBLING COLUMN

1. If required, cut off 1-1/2" NPT pipe at desired length.

2. Drill a 5/16" hole 1" from end of pipe. (See Figure 1)

Figure 1

3. Slide CMS-261 (A) onto end of pipe and attach with a

5/16 x 1/2" button head cap screw (B) or 5/16 x 1/2" button

head security cap screw (C). (See Figure 2)

Figure 2

4. Attach and tighten two 5/16 x 1/4" set screws (D) or two

5/16 x 1/4" security set screws (E) into side of CMS-261 (A).

(See Figure 3)

Figure 3

Install the 1-1/2" NPT threaded column with the attached

CMS-261 following instructions provided with the column.

5/16"

5/32" Security

(Included) 3/16" Security

(included)

A (1)

B (1)

5/16 x 1/2"

C (1)

5/16 x 1/2"

(Security)

D (2)

5/16 x 1/4"

E (2)

5/16 x 1/4"

(Security)

G (1)

5/32"

(Security)

F (1)

3/16"

(Security)

5/16" x 1"

1" from end of pipe

Pipe

(B) or (C) x 1

(A)

(D) or (E) x 2

Produktspezifikationen

Marke:	Chief
Kategorie:	Beamerzubehör
Modell:	CMS261W
Breite:	59 mm
Tiefe:	59 mm
Gewicht:	360 g
Produktfarbe:	Weiß
Höhe:	114 mm
Material:	Metall
Höchstgewichtskapazität:	226.8 kg
Zertifizierung:	TÜV, UL, TAA
Warentarifnummer (HS):	85299097
Kompatibilität:	Speed-Connect
Markenkompatibilität:	Chief