Chief HB92C Bedienungsanleitung
Seiten 1 Engels Beamerzubehör
Lies die Bedienungsanleitung für Chief HB92C kostenlos online oder lade das PDF herunter. 26 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
HB92C
VPCM IDEO ROJECTOR EILING OUNT
FOR HRISTIE C DIGITAL EASY RIDER,
The Christie HB92C custom video projector ceiling mount is designed to provide fast, simple and secure installation.
Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The HB92C
mount also has positive registration lock so the projector may be removed without losing projector mount
registration.
Unpack and check contents:
(1) Deluxe ceiling mount assembly (8) M12 Flat washers
(1) Custom mounting bracket (8) M12 X 20mm hex bolts
(4) 5/16” flange nuts
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2.Place the custom mounting bracket on the projector so the small triangle in the bracket is toward the front of the
projector and all eight holes in the custom bracket align with the eight mounting inserts in the bottom of your
projector.
3.Place (1) M12 flat washer on each of the (8) M12 X 20mm bolts, starting them all by hand and secure them using
the proper size wrench. Using the proper wrench, securely tighten all eight mounting bolts at this time.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL
INJURY! All components must be securely fastened to each other and to the ceiling, AND
the ceiling MUSTbe capable of supporting 5 times the total weight of the installation. If it
cannot, the ceiling MUST be reinforced.
4. Be sure the method of support you are using for the VCM ceiling mount is securely installed to the ceiling. If not,
the ceiling must be reinforced. Improper installation may result in serious personal injury.
5. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
WARNING: Installing a ceiling mount requires the presence of two persons familiar with
mechanical installations. A third assistant is recommended
6. With the help of your one or two assistants, lift the projector and install it on the studs extending from the
mounting plate. Make sure the custom mounting plate is seated in the slots and Tighten securely using the
four 5/16” flange nuts.
For projector alignment see attached sheet.
8803-000063 02/05
Produktspezifikationen
| Marke: | Chief |
| Kategorie: | Beamerzubehör |
| Modell: | HB92C |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Chief HB92C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beamerzubehör Chief
Chief SLM195 Bedienungsanleitung Chief SLM610 Bedienungsanleitung Chief SSB057 Bedienungsanleitung Chief SSB287 Bedienungsanleitung Chief CMS012018 Bedienungsanleitung Chief SSB650 Bedienungsanleitung Chief SSB212 Bedienungsanleitung Chief SLB085 Bedienungsanleitung
Alle Chief Beamerzubehör Bedienungsanleitungen
Beliebt in Beamerzubehör
Chief CPAE080W Bedienungsanleitung Chief CMS0203 Bedienungsanleitung Chief SSM755 Bedienungsanleitung
Bedienungsanleitung Beamerzubehör
Neueste Bedienungsanleitungen für Beamerzubehör
OmniMount OMN-PFC Bedienungsanleitung Vogel's PPA 904 Bedienungsanleitung Vogel's PPC 1585 Bedienungsanleitung Vogel's PPC 1500 Bedienungsanleitung Sony LMP-H260 Bedienungsanleitung Sony LMP-F331 Bedienungsanleitung Sony LMP-H280 Bedienungsanleitung Sony LMP-D214 Bedienungsanleitung Sony LMP-H700 Bedienungsanleitung Sony LMP-H230 Bedienungsanleitung