Citronic D300 Bedienungsanleitung


Lies die bedienungsanleitung für Citronic D300 (4 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Citronic D300 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
D-series
CLASS-D POWER AMPLIFIER
Order ref: 172.103UK (D300)
172.106UK (D600)
172.110UK (D1000)
User Manual
Version 3.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
D-series Amplifiers User Manual
Introduction
Thank you for choosing a Citronic D-series power amplifier as part of your sound reinforcement system. Custom class-D
circuit design provides an efficient amplifier within a compact and lightweight form factor. Please read this manual fully
and follow the instructions to achieve the best results from your amplifier and to avoid damage through misuse.
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel
before further use. Avoid impact, extreme pressure or heavy vibration to the case.
No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel.
Safety
Check for correct mains voltage and condition of IEC lead before connecting to power outlet.
Ensure speaker leads are good condition with no shorted connections or damaged plugs.
Check that the impedances of speaker loads do not exceed the minimum stated load for the amplifier.
Do not allow any foreign objects to enter the case or through the ventilation grilles.
Placement
Keep out of direct sunlight and away from heat sources.
Keep away from damp or dusty environments.
When rack-mounting, ensure adequate support for the base of the amplifier and firm fixings for the front.
Ensure adequate airflow and do not cover cooling vents at the front and rear of the amplifier.
Ensure adequate access to controls and connections.
Cleaning
Use a soft cloth with a neutral detergent to clean the casing as required.
Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups.
Do not use strong solvents for cleaning the unit.
Front Panel
1.
Power on/off switch
6.
Signal present indicators
2.
Cooling vents do not cover or obstruct
7.
Audio Protect indicator
3.
Power on indicator
8.
Audio Limiter indicators
4.
Power Protect indicator
9.
CH.B output level control
5.
CH.A output level control
10.
Amplifier operating mode LEDs
Rear Panel
11.
Input sensitivity switch 0.775V / 1.00V / 1.44V
17.
Cooling fan vents do not cover or obstruct
12.
Amplifier mode switch Bridge / Stereo / Parallel
18.
CH.B stereo or parallel output - SPK connector
13.
75Hz low cut filter on/off switch
19.
Bridge mono output - SPK connector - 8 min.
14.
CH.A+B signal link out (XLR balanced/unbalanced)
20.
CH.A stereo or parallel output - SPK connector
15.
Ground Lift switch
21.
IEC mains power inlet & fuse holder
16.
CH.A+B signal input (XLR balanced/unbalanced)


Produktspezifikationen

Marke: Citronic
Kategorie: Empfänger
Modell: D300

Brauchst du Hilfe?

Wenn Sie Hilfe mit Citronic D300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten