Citronic D4200 Bedienungsanleitung
Lies die bedienungsanleitung für Citronic D4200 (4 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 3 Bewertungen. Hast du eine Frage zu Citronic D4200 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
D-SERIES
CLASS-D QUAD POWER AMPLIFIER
Order ref: D4200 - 172.142UK
Order ref: D4350 - 172.144UK
User Manual
Version 1.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
D-series Quad Amplifiers User Manual
Introduction
Thank you for choosing a Citronic D-series quad power amplifier as part of your sound reinforcement system. These amplifiers
use class-D circuit architecture for light weight and efficient performance. Please read this manual fully and follow the
instructions to achieve the best results from your amplifier and to avoid damage through misuse.
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel before
further use. Avoid impact, extreme pressure or heavy vibration to the case.
No user serviceable parts inside – Do not open the case – refer all servicing to qualified service personnel.
Safety
• Check for correct mains voltage and condition of IEC lead before connecting to power outlet.
• Ensure speaker leads are good condition with no shorted connections or damaged plugs.
• Check that the impedance of speaker loads do not exceed the minimum stated load for the amplifier.
• Do not allow any foreign objects to enter the case or through the ventilation grilles.
Placement
• Keep out of direct sunlight and away from heat sources.
• Keep away from damp or dusty environments.
• When rack-mounting, ensure adequate support for the base of the amplifier and firm fixings for the front.
• Ensure adequate airflow and do not cover cooling vents at the front and rear of the amplifier.
• Ensure adequate access to controls and connections.
Cleaning
• Use a soft cloth with a neutral detergent to clean the casing as required.
• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups.
• Do not use strong solvents for cleaning the unit.
Front Panel
1.
Power on/off switch
5.
Power status LEDs
2.
Channel A level
6.
Channel C level
3.
Channel A+B status LEDs
7.
Channel C+D status LEDs
4.
Channel B level
8.
Channel D level
Rear Panel
9.
Channel C+D amplifier mode switches
13.
Channel A input Low Pass Filter switch
10.
Channel C+D inputs High Pass Filter switch
14.
Channel A+B amplifier mode switches
11.
Ground Lift switch
15.
Channel A, B, C, D speaker outputs (SPK)
12.
Channel A, B, C, D inputs (balanced XLR)
16.
IEC power inlet and fuse holder
Produktspezifikationen
| Marke: | Citronic |
| Kategorie: | Empfänger |
| Modell: | D4200 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Citronic D4200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Empfänger Citronic
4 September 2025
4 September 2025
4 September 2025
20 August 2024
18 August 2024
18 August 2024
17 August 2024
17 August 2024
13 März 2024
9 Februar 2024
Bedienungsanleitung Empfänger
- Oculus VR
- Sonos
- Sunstech
- Rotel
- RetroSound
- T-Mobile
- Audac
- Atlas Learn
- Alecto
- Chandler
- Smart-AVI
- Radial Engineering
- Mtx Audio
- Bluesound
- Dynavox
Neueste Bedienungsanleitung für -Kategorien-
5 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025