Clarity SDO-450 Bedienungsanleitung


Lies die bedienungsanleitung für Clarity SDO-450 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 7 Bewertungen. Hast du eine Frage zu Clarity SDO-450 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
1
CSP SDO-450
Issue 3
(540) 427-3505
SDO-450
DYNAMIC OMNIDIRECTIONAL GOOSENECK MICROPHONE
INTRODUCTION
These instructions contain the specifications and
information necessary to install, operate, and
maintain the SDO-450 Dynamic Omnidirectional
Gooseneck Microphone.
SPECIFICATIONS
Applications
Clarity Paging Systems
Features
Dynamic element
Omnidirectional pickup pattern
Chrome screen with a black housing
19chrome gooseneck
7 foot 4 conductor 2 shield cable permanently
attached
Sealed push-button microswitch
5/8- 27 mounting thread
Mounting flange included
Dimensions
Microphone 1-38/D x 4-5/8L
Gooseneck 19L
Specifications
Element Dynamic
Pattern Omnidirectional
Freq. Response 50 to 12K Hz
Output Impedance Lo Z 400 ohms
Output Level Lo Z -58 db
(0db = 1 mw/10 microbars)
-152 db EIA
INSTALLATION
Refer to Figure 1 for connections to a Clarity
mixer-amplifier.
TECHNICAL ASSISTANCE
When trouble is reported, verify that there are no
broken connections leading to the microphone.
Assistance in troubleshooting is available from the
factory. When calling, you should have a VOM
available and be calling from the job site. Call
(540) 427-3505 and ask for an Applications
Engineer.
CLARITY equipment is not field repairable.
CLARITY maintains service facilities in Roanoke,
VA. Should repairs be necessary please call
CLARITY at (540) 427-3505 for a Return
Authorization Number.


Produktspezifikationen

Marke: Clarity
Kategorie: Nicht kategorisiert
Modell: SDO-450

Brauchst du Hilfe?

Wenn Sie Hilfe mit Clarity SDO-450 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten