COLBOR CL330 Bedienungsanleitung
COLBOR
Erleichterung
CL330
Lies die bedienungsanleitung für COLBOR CL330 (18 Seiten) kostenlos online; sie gehört zur Kategorie Erleichterung. Dieses Handbuch wurde von 42 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 21.5 Bewertungen. Hast du eine Frage zu COLBOR CL330 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/18
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Video Light User Manual
CL330
Caring For Your COLBOR Product
Power Connection
You must use the power adapter that comes with the product rather than
other adapters to avoid damaging the lamp. The positive and negative
connections of the power adapter interface( DC OUT) and the lamp power
interface (DCIN) are shown below:
+ -- +
N N
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
The product is not waterproof.
Do not leave the product unattended while in use. Keep out of reach of
children.
Do not handle with wet hands. Do not touch the hot COB surface.
Please do not block the ventilation and do not look at the light directly when
it is on.
Do not attempt to disassemble or modify the product. Doing so voids
warranty.
Please have the product checked or repaired by authorized technicians if
any malfunctions happened.
Disconnect from the power supply when it is not in use.
Do not cover, inverted COB and radiator for high temperature, do not cover,
inverted, do not touch the lamp holder and radiator vent with your hands
when the product in use.
Do not use any power adapter of other products to avoid the lamp
malfunction.
Malfunction may be caused by dropping, impact of external force.
Failure to follow all the instructions may result in mechanics damage.
Our company reserves the right of nal interpretation of the product.
Product design and specications are subject to change without prior
notice.
Product Instructions
① LED Display Screen
② EFF Mode Button
③ EFF Rate Option Button
④ CCT Mode Button
⑤ Settings Button
⑥ Option Adjustment Knob
⑦ Parameter Adjustment Knob/
Parameter Preset
⑧ DC 48V Power Port
⑨ Power Button
⑩ Bowens Mount
⑪ COB Lamp Beads
⑫ Lamp Angle Adjustment Locking Grip
⑬ Bracket
⑭ Air Outlet
⑮ NATO Slideway
⑯ Air Inlet
⑰ Lamp Grip
⑱ Soft Light Cover Hole
⑲ Soft Light Cover Hole Screws
⑳ Bracket Screw
Light Installation
Hold the COB cover with the Bowens Mount
tenon and rotate it as the direction of the arrow.
Note: Be sure to remove COB protective cover
and COB protective lm before use.
Installation of reector: Align the reector with the groove around the lamp
head and clip it in, turn the reector as the direction of the arrow, and the
reector installation will be completed after the top rod rebounds.
Removal of reector: Under the instructions of “Lamp Cap Protection Cover
Removal".
1. Removal of lamp cap protection cover
2. Installation and removal of reector
Produktspezifikationen
| Marke: | COLBOR |
| Kategorie: | Erleichterung |
| Modell: | CL330 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit COLBOR CL330 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Erleichterung COLBOR
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
31 August 2024
31 August 2024
31 August 2024
Bedienungsanleitung Erleichterung
- IXL
- Friedland
- Fun Generation
- Gewiss
- Megaman
- Livarno Lux
- Vivitar
- Genaray
- Smartwares
- Musicmate
- Integral LED
- Sigma
- Powerplus
- Ranex
- Sengled
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
13 Oktober 2024
13 Oktober 2024
9 Oktober 2024
8 Oktober 2024
8 Oktober 2024
7 Oktober 2024
7 Oktober 2024
6 Oktober 2024
5 Oktober 2024