Conceptronic C4CHCCTVKITM Bedienungsanleitung


Lies die bedienungsanleitung für Conceptronic C4CHCCTVKITM (74 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 9 Bewertungen. Hast du eine Frage zu Conceptronic C4CHCCTVKITM oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/74
P1
User's installation and operation Manual
Important Safeguards and Warding
Do not place heavy objects on the DVR.
Do not let any solid or liquid fall into or infiltrate the DVR
Please brush printed circuit boards,connectors,fans,machine box and so on regularly.Before the dust
cleaning please switch off the power and unplug it.
Do not disassemble or repair the DVR by yourself.Do not replace the components by yourself.
Environment
Please place and use the DVR between 0 and 40 .Avoid direct sunlight.Stay away from heat source. ℃ ℃
Do not install the DVR in the damp environment.
Do not use the DVR in smoky or dusty environment.
Avoid collision or strong fall.
Please insure the DVR level installation in a stable workplace.
Please install in ventilated place.Keep the vent clean.
Use within the rating input and output scope.


Produktspezifikationen

Marke: Conceptronic
Kategorie: Sicherheitskamera
Modell: C4CHCCTVKITM
Bildschirmdiagonale: - "
Mitgelieferte Kabel: BNC
Internationale Schutzart (IP-Code): IP66
Übertragungstechnik: Kabelgebunden
Anzahl USB 2.0 Anschlüsse: 2
Betriebstemperatur: -10 - 50 °C
Relative Luftfeuchtigkeit in Betrieb: 10 - 90 %
Unterstützte Netzwerkprotokolle: DHCP, DNS, DDNS, PPPoE, FTP, SMTP
Eingebauter Ethernet-Anschluss: Ja
Stromstärke: 2 A
Anzahl Kanäle: 4 Kanäle
LED-Anzeigen: Ja
Analoges Signalformatsystem: NTSC, PAL
Line-Ausgänge (RCA): 1
Größe des Bildsensors: 1/4 "
Kamera enthalten: Ja
Nachtmodus: Ja
Videokompressionsformate: H.264
Anzahl VGA (D-Sub) Anschlüsse: 1
Eingangsspannung: 12 V
Maus enthalten: Ja
Unterstützung von Positionierung: Indoor/Outdoor
Netzteil enthalten: Ja
HDD Größe: 3.5 "
Speichermedien Typ: HDD
BNC Eingänge: 4
HDD Schnittstelle: SATA
Video-Capture Geschwindigkeit: 30 fps
Anzahl der Kameras: 4
Mindestbeleuchtung: 0 Lux
Nachtsichtdistanz: 20 m
LED Typ: IR
Sensor-Typ: CMOS
Anzahl der Beleuchtungs-LEDs: 24
RS-485-Anschlüsse: 1
Maximale unterstützte Anzahl der HDD: 1
Line-Eingänge (RCA): 4
BNC Ausgänge: 1
Maximaler HDD Speicher: 4000 GB
Überwachungskamera Formfaktor: Geschoss
Recorder enthalten: Ja
Kamera Oberfläche: BNC
Recorder Weite: 230 mm
Recorder Tiefe: 225 mm
Recorder Höhe: 45 mm
Rekordergewicht: 1200 g

Brauchst du Hilfe?

Wenn Sie Hilfe mit Conceptronic C4CHCCTVKITM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten